stepper (item 27964 from parallax) (more info. about it), thanks in advance
Archiver
Posts: 46,084
Hi, stampers:
Only to know if somebody
have more information about the steppers (item 27964)
I need speed versus torque curve,current,
and lifetime (aprox. )
Thanks in advance: Joe
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
Only to know if somebody
have more information about the steppers (item 27964)
I need speed versus torque curve,current,
and lifetime (aprox. )
Thanks in advance: Joe
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
Comments
We have all of the information available from the manufacturer of this
surplus OEM motor. Here's the link to the documentation on our web
site-
http://www.parallax.com/html_pages/edu/courses/hosting.asp
Unfortunately, a curve is not available from the manufacturer.
Current is 500 mA with no torque.
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8003 Fax
(888) 512-1024 Sales
www.parallax.com
Original Message
From: Joe Terk [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=PeMztcORuJwzSUSkXAlcEOjnpZS7vK-56nMN3TtzxazIXfyjjkIoEhro_GJvmUg-gx0JBWlI-Q]joeterk@y...[/url
Sent: Monday, September 15, 2003 3:56 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] stepper (item 27964 from parallax) (more info.
about it), thanks in advance
Hi, stampers:
Only to know if somebody
have more information about the steppers (item 27964)
I need speed versus torque curve,current,
and lifetime (aprox. )
Thanks in advance: Joe
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
This message has been scanned by WebShield. Please report SPAM to
abuse@p....
I was replying to a prospective host and sent the incorrect link in the
email below (Thanks Bruce B.)
Here's the product page link
http://www.parallax.com/detail.asp?product_id=27964
Here's the direct link to the documentation
http://www.parallax.com/dl/docs/prod/motors/27964.pdf
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8003 Fax
(888) 512-1024 Sales
www.parallax.com
Original Message
From: Erik Wood
Sent: Tuesday, September 16, 2003 7:37 AM
To: basicstamps@yahoogroups.com
Subject: RE: [noparse][[/noparse]basicstamps] stepper (item 27964 from parallax) (more
info. about it), thanks in advance
Hi Joe,
We have all of the information available from the manufacturer of this
surplus OEM motor. Here's the link to the documentation on our web
site- http://www.parallax.com/html_pages/edu/courses/hosting.asp
Unfortunately, a curve is not available from the manufacturer.
Current is 500 mA with no torque.
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8003 Fax
(888) 512-1024 Sales
www.parallax.com
Original Message
From: Joe Terk [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=-YNOBjzym0EO1tcj25XaaxtgB-qGKyd0OS4r3_8XBzSEv6hHw5DMVExmF7alWxbcj0PfpA8Zpcoq0w]joeterk@y...[/url
Sent: Monday, September 15, 2003 3:56 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] stepper (item 27964 from parallax) (more info.
about it), thanks in advance
Hi, stampers:
Only to know if somebody
have more information about the steppers (item 27964)
I need speed versus torque curve,current,
and lifetime (aprox. )
Thanks in advance: Joe
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
This message has been scanned by WebShield. Please report SPAM to
abuse@p....
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
This message has been scanned by WebShield. Please report SPAM to
abuse@p....
I read this pdf. But I can't find
I need speed versus torque curve,current,
Thanks in advance: Joe
--- Erik Wood <ewood@p...> wrote:
> Ooooops!
>
> I was replying to a prospective host and sent the
> incorrect link in the
> email below (Thanks Bruce B.)
>
> Here's the product page link
> http://www.parallax.com/detail.asp?product_id=27964
>
> Here's the direct link to the documentation
>
http://www.parallax.com/dl/docs/prod/motors/27964.pdf
>
> Erik Wood
> ewood@p...
>
> Parallax, Inc.
> 599 Menlo Dr., Suite #100
> Rocklin, CA 95765
> (916) 624-8003 Fax
> (888) 512-1024 Sales
> www.parallax.com
>
>
>
Original Message
> From: Erik Wood
> Sent: Tuesday, September 16, 2003 7:37 AM
> To: basicstamps@yahoogroups.com
> Subject: RE: [noparse][[/noparse]basicstamps] stepper (item 27964 from
> parallax) (more
> info. about it), thanks in advance
>
>
> Hi Joe,
>
> We have all of the information available from the
> manufacturer of this
> surplus OEM motor. Here's the link to the
> documentation on our web
> site-
>
http://www.parallax.com/html_pages/edu/courses/hosting.asp
>
> Unfortunately, a curve is not available from the
> manufacturer.
> Current is 500 mA with no torque.
>
> Erik Wood
> ewood@p...
>
> Parallax, Inc.
> 599 Menlo Dr., Suite #100
> Rocklin, CA 95765
> (916) 624-8003 Fax
> (888) 512-1024 Sales
> www.parallax.com
>
>
>
Original Message
> From: Joe Terk [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=9G5pwXcg6qn6BAAXky8Mm_4sgxPvUizgwEm4OUZYrnHaLhn9C5EewHYlYkg4YacT92JMfqg5Uhg]joeterk@y...[/url
> Sent: Monday, September 15, 2003 3:56 PM
> To: basicstamps@yahoogroups.com
> Subject: [noparse][[/noparse]basicstamps] stepper (item 27964 from
> parallax) (more info.
> about it), thanks in advance
>
>
> Hi, stampers:
>
> Only to know if somebody
> have more information about the steppers (item
> 27964)
> I need speed versus torque curve,current,
> and lifetime (aprox. )
>
> Thanks in advance: Joe
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> http://sitebuilder.yahoo.com
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed.
> Text in the Subject
> and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> This message has been scanned by WebShield. Please
> report SPAM to
> abuse@p....
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed.
> Text in the Subject
> and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> This message has been scanned by WebShield. Please
> report SPAM to
> abuse@p....
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed.
> Text in the Subject and Body of the message will be
> ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
The speed vs. torque curve information is not available from the
manufacturer.
I would recommend finding another motor from Jameco or DigiKey.
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8003 Fax
(888) 512-1024 Sales
www.parallax.com
Original Message
From: Joe Terk [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=BLB6_NqhQ6S3knAURrEayMl6Mq8L3M6PU3EuZVeAJxO6eWik6ScUkyOMGziHdeYr9qDpekJW40Tc9Q]joeterk@y...[/url
Sent: Tuesday, September 16, 2003 10:05 AM
To: basicstamps@yahoogroups.com
Subject: RE: [noparse][[/noparse]basicstamps] stepper (item 27964 from parallax) (more
info. about it), thanks in advance
Thanks Erik:
I read this pdf. But I can't find
I need speed versus torque curve,current,
Thanks in advance: Joe
--- Erik Wood <ewood@p...> wrote:
> Ooooops!
>
> I was replying to a prospective host and sent the
> incorrect link in the
> email below (Thanks Bruce B.)
>
> Here's the product page link
> http://www.parallax.com/detail.asp?product_id=27964
>
> Here's the direct link to the documentation
>
http://www.parallax.com/dl/docs/prod/motors/27964.pdf
>
> Erik Wood
> ewood@p...
>
> Parallax, Inc.
> 599 Menlo Dr., Suite #100
> Rocklin, CA 95765
> (916) 624-8003 Fax
> (888) 512-1024 Sales
> www.parallax.com
>
>
>
Original Message
> From: Erik Wood
> Sent: Tuesday, September 16, 2003 7:37 AM
> To: basicstamps@yahoogroups.com
> Subject: RE: [noparse][[/noparse]basicstamps] stepper (item 27964 from
> parallax) (more
> info. about it), thanks in advance
>
>
> Hi Joe,
>
> We have all of the information available from the manufacturer of this
> surplus OEM motor. Here's the link to the
> documentation on our web
> site-
>
http://www.parallax.com/html_pages/edu/courses/hosting.asp
>
> Unfortunately, a curve is not available from the manufacturer.
> Current is 500 mA with no torque.
>
> Erik Wood
> ewood@p...
>
> Parallax, Inc.
> 599 Menlo Dr., Suite #100
> Rocklin, CA 95765
> (916) 624-8003 Fax
> (888) 512-1024 Sales
> www.parallax.com
>
>
>
Original Message
> From: Joe Terk [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=BLB6_NqhQ6S3knAURrEayMl6Mq8L3M6PU3EuZVeAJxO6eWik6ScUkyOMGziHdeYr9qDpekJW40Tc9Q]joeterk@y...[/url
> Sent: Monday, September 15, 2003 3:56 PM
> To: basicstamps@yahoogroups.com
> Subject: [noparse][[/noparse]basicstamps] stepper (item 27964 from
> parallax) (more info.
> about it), thanks in advance
>
>
> Hi, stampers:
>
> Only to know if somebody
> have more information about the steppers (item
> 27964)
> I need speed versus torque curve,current,
> and lifetime (aprox. )
>
> Thanks in advance: Joe
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> http://sitebuilder.yahoo.com
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed.
> Text in the Subject
> and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> This message has been scanned by WebShield. Please
> report SPAM to
> abuse@p....
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed.
> Text in the Subject
> and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> This message has been scanned by WebShield. Please
> report SPAM to
> abuse@p....
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed.
> Text in the Subject and Body of the message will be
> ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
This message has been scanned by WebShield. Please report SPAM to
abuse@p....