Two Basic Stamps...
Archiver
Posts: 46,084
Hi,
We have reached memory capacity of the BS2p chip, and the client wants to
double the number of sensor attached to the Basic Stamp.
Currently, we think that using two basic stamp boards would be our best
solution. What is your opinion?
Also, does anyone have any documentation on how to set up two basic stamp
chips in a "master-slave" combination?
Regards,
Manan
We have reached memory capacity of the BS2p chip, and the client wants to
double the number of sensor attached to the Basic Stamp.
Currently, we think that using two basic stamp boards would be our best
solution. What is your opinion?
Also, does anyone have any documentation on how to set up two basic stamp
chips in a "master-slave" combination?
Regards,
Manan
Comments
a prize. If not, take a look at this article for one method of using
multiple banks:
http://www.parallax.com/dl/docs/cols/nv/vol3/col/NV87-Multi_Bank_Program
ming.pdf
You can find documentation on Stamp-to-Stamp basics in ... surprise ...
our manual (in SERIN and SEROUT sections). Also, you can a detailed
article in our Nuts & Volts library:
http://www.parallax.com/dl/docs/cols/nv/vol3/col/NV81-A_Tale_of_Two_Stam
ps.pdf
-- Jon Williams
-- Applications Engineer, Parallax
-- Dallas Office
Original Message
From: manan_atit [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=t2jwSo7r0EwnKtthI7axHYaUkD5Wob1MPr1JgEcj3DGn7ER0PUYVwWZGzCakgUo1b3ULSFjJK0S68xAbQg]manan_atit@y...[/url
Sent: Monday, August 18, 2003 7:25 AM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] Two Basic Stamps...
Hi,
We have reached memory capacity of the BS2p chip, and the client wants
to
double the number of sensor attached to the Basic Stamp.
Currently, we think that using two basic stamp boards would be our best
solution. What is your opinion?
Also, does anyone have any documentation on how to set up two basic
stamp chips in a "master-slave" combination?
Regards,
Manan
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
This message has been scanned by WebShield. Please report SPAM to
abuse@p....