r. Help ASAP Please! HM2007 Speech Recognition System
Archiver
Posts: 46,084
The Manufactors site doesnt exist and along with it not exisiting
(HMC) they stoped making this product, though you will find places
where to buy. I bought it from Imagesco, the datasheet is also
incorrect with many problems in it. ive been trough all the googles
pages with the search hm2007 and there has not been much (10 pages)
and most of them are repeats. I would really like to open this to the
Basic stamp so it can integrated easier with other products
consisting the basic stamp.
I just have the trouble of programming it. If you know how i can
record the 4 bus numbers that the chip is receiving (2 instances from
4 wires(nibbles)), record them, and activate commands from each one,
is what i am trying to achieve.
--- In basicstamps@yahoogroups.com, "Vernon Graner" <vern@t...> wrote:
> Sorry, I don't know anything about how to program the HM2007, and
the
> fact that no one has responded to the 5 POSTS you've made asking
for help
> would lead me to believe that no one else does either! [noparse]:)[/noparse]
>
> It seems that if people don't have anything to contribute around
here,
> they simply ignore you (see my questions on controlling audio from
the
> stamp for reference!) so I'd guess you'd be better off consulting
the
> manufacturers web site or looking some more with google.
>
> In the short bit of searching I did, I found this:
>
> http://www.imagesco.com/catalog/hm2007/SpeechRecognitionKit.html
>
> Which has the chip pre-made into a circuit, and this:
>
> http://www.xnet2.com/KgSystems/Tigers/9811/msg00129.html
>
> Which details how to use the chip with a tiny tiger, which you
might be
> able to leverage into using it with a stamp. Good luck! [noparse]:)[/noparse]
>
> Vern
>
> --
> Vern Graner CNE/CNA/SSE | "If the network is down, then you're
> Senior Systems Engineer | obviously incompetent so why are we
> Texas Information Services | paying you? Of course, if the network
> vern@t... www.txis.com | is up, then we obviously don't need
> Cell 507-7851 Desk 328-8947 | you, so why are we paying you?" VLG
>
>
>
> virtualeast said:
> > HELP ASAP PLEASE!!!!
> >
> > I already have the setup done with the wires for the HM2007
Speech
> > Recogntion Chip. But my problem is i dont knw how to program the
> > chip using the busses.
> >
> > Can any body help me?
> >
> > i know this chip is very difficult to deal with, It is with me.
Ive
> > Looked at schematics and set it up accordingly, but about the
> > programming... I have no clue what to do? the data sheet is some
> > what incorrect. Help Please!! google.com search for hm2007 if you
> > need any refrences.
> >
> > >>its an issue with busses and i dont know how to communicate
with
> > it.<<
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> > from the same email address that you subscribed. Text in the
Subject and
> > Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
(HMC) they stoped making this product, though you will find places
where to buy. I bought it from Imagesco, the datasheet is also
incorrect with many problems in it. ive been trough all the googles
pages with the search hm2007 and there has not been much (10 pages)
and most of them are repeats. I would really like to open this to the
Basic stamp so it can integrated easier with other products
consisting the basic stamp.
I just have the trouble of programming it. If you know how i can
record the 4 bus numbers that the chip is receiving (2 instances from
4 wires(nibbles)), record them, and activate commands from each one,
is what i am trying to achieve.
--- In basicstamps@yahoogroups.com, "Vernon Graner" <vern@t...> wrote:
> Sorry, I don't know anything about how to program the HM2007, and
the
> fact that no one has responded to the 5 POSTS you've made asking
for help
> would lead me to believe that no one else does either! [noparse]:)[/noparse]
>
> It seems that if people don't have anything to contribute around
here,
> they simply ignore you (see my questions on controlling audio from
the
> stamp for reference!) so I'd guess you'd be better off consulting
the
> manufacturers web site or looking some more with google.
>
> In the short bit of searching I did, I found this:
>
> http://www.imagesco.com/catalog/hm2007/SpeechRecognitionKit.html
>
> Which has the chip pre-made into a circuit, and this:
>
> http://www.xnet2.com/KgSystems/Tigers/9811/msg00129.html
>
> Which details how to use the chip with a tiny tiger, which you
might be
> able to leverage into using it with a stamp. Good luck! [noparse]:)[/noparse]
>
> Vern
>
> --
> Vern Graner CNE/CNA/SSE | "If the network is down, then you're
> Senior Systems Engineer | obviously incompetent so why are we
> Texas Information Services | paying you? Of course, if the network
> vern@t... www.txis.com | is up, then we obviously don't need
> Cell 507-7851 Desk 328-8947 | you, so why are we paying you?" VLG
>
>
>
> virtualeast said:
> > HELP ASAP PLEASE!!!!
> >
> > I already have the setup done with the wires for the HM2007
Speech
> > Recogntion Chip. But my problem is i dont knw how to program the
> > chip using the busses.
> >
> > Can any body help me?
> >
> > i know this chip is very difficult to deal with, It is with me.
Ive
> > Looked at schematics and set it up accordingly, but about the
> > programming... I have no clue what to do? the data sheet is some
> > what incorrect. Help Please!! google.com search for hm2007 if you
> > need any refrences.
> >
> > >>its an issue with busses and i dont know how to communicate
with
> > it.<<
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> > from the same email address that you subscribed. Text in the
Subject and
> > Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >