Basic Stamp 2 and ExpressPCB
Archiver
Posts: 46,084
Does anyone know if the BS2 is available as a component in the
ExpressSCH software? I know that a standard 24-pin DIP package is
available in the ExpressPCB software, but I don't see it in the
Schematic software.
Thanks...
Jim Martin
ExpressSCH software? I know that a standard 24-pin DIP package is
available in the ExpressPCB software, but I don't see it in the
Schematic software.
Thanks...
Jim Martin
Comments
fw_econo@y... writes:
> Does anyone know if the BS2 is available as a component in the
> ExpressSCH software? I know that a standard 24-pin DIP package is
> available in the ExpressPCB software, but I don't see it in the
> Schematic software.
>
> Thanks...
>
> Jim Martin
>
I can't find it either.......It looks like there is an option to create
custom components. I played with it for about 3 minutes but could not figure out
how to make a custom component....
I also sent an email to express pcb asking then to add the basic stamp to the
library.
[noparse][[/noparse]Non-text portions of this message have been removed]
fw_econo@y... writes:
> Does anyone know if the BS2 is available as a component in the
> ExpressSCH software? I know that a standard 24-pin DIP package is
> available in the ExpressPCB software, but I don't see it in the
> Schematic software.
>
> Thanks...
>
FYI
Thank you for contacting ExpressPCB.
All of the component models that we have are included with
the ExpressPCB layout program and the ExpressSCH program.
For other parts you can make your own.· Please see the online help within the
ExpressPCB program for more information.· Look for the topic
"Making Custom Components" and "Making Custom Schematic Components."
For making parts with metric spacing, I recommend setting the
"Snap grid" in the "Options" dialog box to the metric equivalent
of the spacing that you require.· For example .5mm is 0.01969",
.65mm is 0.02559", .8mm is 0.03150", 1mm is 0.03937", and 2mm
is 0.07874".
I will forward your request in regards to the Basic Stamp micro-controller
to our design team.
[noparse][[/noparse]Non-text portions of this message have been removed]
I have a Stamp I created in the Custom section of Express SCH program if you
would like to have it
[noparse][[/noparse]Non-text portions of this message have been removed]
(0.6 inch).
Works for me,
Rich
Original Message
From: smartdim@a... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=XBPXcKYO5wgYHNqR0lqV4WJMQhWZQ2D-JaNkMnAixkDAPXJS87rizJYLpK_G_7XjZlXeiyeK6w]smartdim@a...[/url
Sent: Wednesday, July 23, 2003 9:17 AM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] Basic Stamp 2 and ExpressPCB
In a message dated 7/23/2003 6:41:36 AM Pacific Daylight Time,
fw_econo@y... writes:
> Does anyone know if the BS2 is available as a component in the
> ExpressSCH software? I know that a standard 24-pin DIP package is
> available in the ExpressPCB software, but I don't see it in the
> Schematic software.
>
> Thanks...
>
> Jim Martin
>
I can't find it either.......It looks like there is an option to create
custom components. I played with it for about 3 minutes but could not
figure out
how to make a custom component....
I also sent an email to express pcb asking then to add the basic stamp
to the
library.
[noparse][[/noparse]Non-text portions of this message have been removed]
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
- Robert
Original Message
From: "Jim D. Martin" <fw_econo@y...>
To: <basicstamps@yahoogroups.com>
Sent: Tuesday, July 22, 2003 2:09 PM
Subject: [noparse][[/noparse]basicstamps] Basic Stamp 2 and ExpressPCB
> Does anyone know if the BS2 is available as a component in the
> ExpressSCH software? I know that a standard 24-pin DIP package is
> available in the ExpressPCB software, but I don't see it in the
> Schematic software.
>
> Thanks...
>
> Jim Martin
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
writes:
> For Jim Martin and smartdim
>
> I have a Stamp I created in the Custom section of Express SCH program if you
>
> would like to have it
Yes, please forward to my personal email as the user group does not accept
attachments.
Thank you
[noparse][[/noparse]Non-text portions of this message have been removed]
Ian Phillips
Original Message
From: smartdim@a... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=syzRCNuqXXKt1-sYiGnDDXbUafC9c0dW2AkKFSZ2fnf9wnAo5Vo3eo3WUgNEqv80_XFzg04f3Pop-Hk]smartdim@a...[/url
Sent: July 23, 2003 1:50 PM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] Basic Stamp 2 and ExpressPCB
In a message dated 7/23/2003 7:55:23 AM Pacific Daylight Time,
Newzed@a...
writes:
> For Jim Martin and smartdim
>
> I have a Stamp I created in the Custom section of Express SCH program
if you
>
> would like to have it
Yes, please forward to my personal email as the user group does not
accept
attachments.
Thank you
[noparse][[/noparse]Non-text portions of this message have been removed]
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
all snarf a copy? [noparse]:)[/noparse]
--
Vern Graner CNE/CNA/SSE | "If the network is down, then you're
Senior Systems Engineer | obviously incompetent so why are we
Texas Information Services | paying you? Of course, if the network
vern@t... www.txis.com | is up, then we obviously don't need
Cell 507-7851 Desk 328-8947 | you, so why are we paying you?" VLG
Ian Phillips said:
> I'll take a copy also please.
>
> Ian Phillips
>
>
Original Message
> From: smartdim@a... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=nnb_QMHlxRmxJafLNdnXqjEjM5XNkQZcPW1OZYHX_hf0LBOaxM5bVimVLoNSf2SmeM-a_bwF]smartdim@a...[/url
> Sent: July 23, 2003 1:50 PM
> To: basicstamps@yahoogroups.com
> Subject: Re: [noparse][[/noparse]basicstamps] Basic Stamp 2 and ExpressPCB
>
> In a message dated 7/23/2003 7:55:23 AM Pacific Daylight Time,
> Newzed@a...
> writes:
>
>> For Jim Martin and smartdim
>>
>> I have a Stamp I created in the Custom section of Express SCH program
> if you
>>
>> would like to have it
>
> Yes, please forward to my personal email as the user group does not
> accept
> attachments.
>
> Thank you
>
>
> [noparse][[/noparse]Non-text portions of this message have been removed]
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject
> and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
> Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
writes:
> Hmm... how about placing it in the files section of the group so we can
> all snarf a copy? [noparse]:)[/noparse]
>
OK - tell me how to do it. )[noparse]:o[/noparse]()
[noparse][[/noparse]Non-text portions of this message have been removed]