Circuit design software
Archiver
Posts: 46,084
I've been trying out DesignWorks Lite circuit design software for a couple weeks
now. I like it pretty well overall and need to register for $40 within 10 days
or so. But I was wondering if any of you have recommendations of other cheap
software I should try before I register DesignWorks?
Chuck H.
now. I like it pretty well overall and need to register for $40 within 10 days
or so. But I was wondering if any of you have recommendations of other cheap
software I should try before I register DesignWorks?
Chuck H.
Comments
[noparse][[/noparse]Non-text portions of this message have been removed]
Can't beat the price to try it out. I used it to create a board for a
Basic Stamp 2sx project, then had the board done by CustomPCB out of
Malaysia. Worked perfectly--beginners luck, I suppose.
Robert Carter
> I've been trying out DesignWorks Lite circuit design software for a
couple weeks now. I like it pretty well overall and need to register
for $40 within 10 days or so. But I was wondering if any of you have
recommendations of other cheap software I should try before I
register DesignWorks?
>
> Chuck H.
Try AutoTRAX EDA Version 1.21 PCB design suite is totally free
with no limits and can be download now from www.autotraxEDA.com
I have downloaded it but have not tried it yet. They also have a
yahoo group you may like to look at first.
Cheers
Col
> www.expesspcb.com
>
>
> [noparse][[/noparse]Non-text portions of this message have been removed]
Thanks a lot for the recommendation. I've been trying it out for a few evenings
now. I like it just as well as DesignworksLite. Seems to do everything that
does, the default library of IC devices is larger, and it seems to me easier to
construct new devices. And the price (free) is certainly right.
Thanks again.
Chuck H.
ch12@n... writes:
> --- In basicstamps@yahoogroups.com, smartdim@a... wrote:
> >www.expesspcb.com
> >
> >
> >[noparse][[/noparse]Non-text portions of this message have been removed]
> Thanks a lot for the recommendation. I've been trying it out for a few
> evenings now. I like it just as well as DesignworksLite. Seems to do
> everything that does, the default library of IC devices is larger, and it
> seems to me easier to construct new devices. And the price (free) is
> certainly right.
>
> Thanks again.
> Chuck H.
Glad to help!
Your welcome
Ken M
[noparse][[/noparse]Non-text portions of this message have been removed]
> > www.expesspcb.com
Does anyone know of/have used a similar service to ExpressPCB.com in the UK?
express pcb offer a very useful service and if it wasn't for the time it
would take to ship accross the pond (not their fault I know), I'd use
them...
Cheers
Kev/.
Try www.pcbpool.com/uk_index.htm
---
Justin Pinner
Energise Technology Ltd
www.energisetechnology.com
www.competition-robotics.com
www.gamingpost.co.uk
Original Message
From: Kev Pearce (kevp.com) [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=YPqSW3vDhoj5NoFA-7Kjyre54iYIQThTb99tEXG1e8POkyLBMHmIO1B4ILO0N0pZ1yY-5n4KBE0CTQ]email.me@k...[/url
Sent: 13 May 2003 14:44
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] Re: Circuit design software
Hi all,
> > www.expesspcb.com
Does anyone know of/have used a similar service to ExpressPCB.com in the UK?
express pcb offer a very useful service and if it wasn't for the time it
would take to ship accross the pond (not their fault I know), I'd use
them...
Cheers
Kev/.
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/