in a heap of trouble
Archiver
Posts: 46,084
yes not a big heap but trouble none the less.
A couple months maybe even 1 year ago, I was at ol' radio shack
(doesn't happen often) and they were getting rid of some recording
chips to record voice and such I bought up 3 of them. Going through
and doing some spring cleaning I found 1 of my chips however there
was absolutely no documentation on how to use it (there used to be
but I believe i lost it). now I need help finding a schematic or
spec sheet because it is a discontinued chip.
there are 3 rows of info this is an ISD device made by dast
1000AP
9446
R2C046LA
it is in a 28 pin (14 on each row) dip format. Any help would gladly
be appreciated. Thanks in advance
A couple months maybe even 1 year ago, I was at ol' radio shack
(doesn't happen often) and they were getting rid of some recording
chips to record voice and such I bought up 3 of them. Going through
and doing some spring cleaning I found 1 of my chips however there
was absolutely no documentation on how to use it (there used to be
but I believe i lost it). now I need help finding a schematic or
spec sheet because it is a discontinued chip.
there are 3 rows of info this is an ISD device made by dast
1000AP
9446
R2C046LA
it is in a 28 pin (14 on each row) dip format. Any help would gladly
be appreciated. Thanks in advance
Comments
it's been a few years), but I found mine on the Tandy support site
(http://support.tandy.com/support_supplies/7981.htm).
Just took a second look, try this one:
http://support.tandy.com/support_supplies/15442.htm
Hope this helps...
Aaron
Original Message
From: chalma_juice [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=Yl47g9U96YP2CI3lgR6m7hLWO_QWmVTlQAp8v4aka-a6rHRMldrk4OE8LLIPfNk6YebFIVtAZCy7V01h4Q]Chalma_Juice@y...[/url
Sent: Sunday, April 27, 2003 10:52 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] in a heap of trouble
yes not a big heap but trouble none the less.
A couple months maybe even 1 year ago, I was at ol' radio shack
(doesn't happen often) and they were getting rid of some recording
chips to record voice and such I bought up 3 of them. Going through
and doing some spring cleaning I found 1 of my chips however there
was absolutely no documentation on how to use it (there used to be
but I believe i lost it). now I need help finding a schematic or
spec sheet because it is a discontinued chip.
there are 3 rows of info this is an ISD device made by dast
1000AP
9446
R2C046LA
it is in a 28 pin (14 on each row) dip format. Any help would gladly
be appreciated. Thanks in advance
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Regards
Tim Stockman
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
STOCKMAN ELECTRONICS
Computers & Communications
3 Young St
BURRA 5417
SOUTH AUSTRALIA
Ph (08) 8892 2708
Fax (08) 8892 2788
Email tim.stockman@s...
WEB www.stockmanelectronics.com.au
Mobile 0418 811 725
Mobile EMAIL tim.mobile@s...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~!
Original Message
From: Aaron Bond [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=Hgp5GvpvTi7cPWPlr60KEwzsi5hoJnOrsR4RMllESIIFqMdl9w7y86_Ht-Iy8zVLSjJcqb1FLQ]abond@q...[/url
Sent: Monday, 28 April 2003 3:54 PM
To: basicstamps@yahoogroups.com
Subject: RE: [noparse][[/noparse]basicstamps] in a heap of trouble
Not sure this is the same chip as the one I have (should say had ---
it's been a few years), but I found mine on the Tandy support site
(http://support.tandy.com/support_supplies/7981.htm).
Just took a second look, try this one:
http://support.tandy.com/support_supplies/15442.htm
Hope this helps...
Aaron
Original Message
From: chalma_juice [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=7MP2Oa5q7f9HDdfYJasWgvzRJuCf_kf68t7bTeNWMS7Bq6UYTUSPJK8JQCdClPBFLbn7BONCxzR9Ldok]Chalma_Juice@y...[/url
Sent: Sunday, April 27, 2003 10:52 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] in a heap of trouble
yes not a big heap but trouble none the less.
A couple months maybe even 1 year ago, I was at ol' radio shack
(doesn't happen often) and they were getting rid of some recording
chips to record voice and such I bought up 3 of them. Going through
and doing some spring cleaning I found 1 of my chips however there
was absolutely no documentation on how to use it (there used to be
but I believe i lost it). now I need help finding a schematic or
spec sheet because it is a discontinued chip.
there are 3 rows of info this is an ISD device made by dast
1000AP
9446
R2C046LA
it is in a 28 pin (14 on each row) dip format. Any help would gladly
be appreciated. Thanks in advance
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/