See a clock on a LCD-display
Archiver
Posts: 46,084
Hi,
I’m a student from Belgium and my class (I follow electronics-electricity)
must make a robot for our final test (last year in school). My job is to
create the controller module for displaying some values. I’m using a
BS2P-24pins. I’m having a problem with displaying a real time clock on the
display (hours, minutes, seconds). Could anybody help me with this. It
should be grate if somebody could give me a basic program (so short as
possible). The LCD is a parallel LCD-display (I bought it together with my
INEX-1000 simulation board).
Kindly Regards
Tim from Belgium
[noparse][[/noparse]Non-text portions of this message have been removed]
I’m a student from Belgium and my class (I follow electronics-electricity)
must make a robot for our final test (last year in school). My job is to
create the controller module for displaying some values. I’m using a
BS2P-24pins. I’m having a problem with displaying a real time clock on the
display (hours, minutes, seconds). Could anybody help me with this. It
should be grate if somebody could give me a basic program (so short as
possible). The LCD is a parallel LCD-display (I bought it together with my
INEX-1000 simulation board).
Kindly Regards
Tim from Belgium
[noparse][[/noparse]Non-text portions of this message have been removed]
Comments
http://www.parallax.com/Downloads/Source_Code/BS2p_Book.zip
http://www.parallax.com/detail.asp?product_id=70001
--- In basicstamps@yahoogroups.com, "TLD-NV" <peter.christiaen@s...>
wrote:
> Hi,
>
> I'm a student from Belgium and my class (I follow electronics-
electricity)
> must make a robot for our final test (last year in school). My job
is to
> create the controller module for displaying some values. I'm using
a
> BS2P-24pins. I'm having a problem with displaying a real time
clock on the
> display (hours, minutes, seconds). Could anybody help me with
this. It
> should be grate if somebody could give me a basic program (so
short as
> possible). The LCD is a parallel LCD-display (I bought it together
with my
> INEX-1000 simulation board).
>
>
> Kindly Regards
>
> Tim from Belgium
>
>
> [noparse][[/noparse]Non-text portions of this message have been removed]