Shop OBEX P1 Docs P2 Docs Learn Events
Q for Aussie Stampers:- Variable reluctance pickup — Parallax Forums

Q for Aussie Stampers:- Variable reluctance pickup

ArchiverArchiver Posts: 46,084
edited 2003-03-16 22:09 in General Discussion
Hi Stampers,

Does any Aussie stamper have a good, inexpensive source for a
variable reluctance pickup? Or has anyone had luck with a DIY version?

I am thinking about using one from a crank angle sensor on an EFI
car, I just need to work out which car has the cheapest one!



Regards

Tim Stockman

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
STOCKMAN ELECTRONICS
Computers & Communications
3 Young St
BURRA 5417
SOUTH AUSTRALIA
Ph (08) 8892 2708
Fax (08) 8892 2788
Email tim.stockman@s...
WEB www.stockmanelectronics.com.au
Mobile 0418 811 725
Mobile EMAIL tim.mobile@s...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~!

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2003-03-16 22:05
    In a message dated 3/16/2003 1:51:20 PM Pacific Standard Time,
    tim.stockman@s... writes:

    > Hi Stampers,
    >
    > Does any Aussie stamper have a good, inexpensive source for a
    > variable reluctance pickup? Or has anyone had luck with a DIY version?
    >
    > I am thinking about using one from a crank angle sensor on an EFI
    > car, I just need to work out which car has the cheapest one!
    >
    >
    >
    > Regards
    >
    > Tim Stockman
    >

    Do you have what we call "Junk Yards" down under?


    [noparse][[/noparse]Non-text portions of this message have been removed]
  • ArchiverArchiver Posts: 46,084
    edited 2003-03-16 22:09
    Yes,

    But not within a hundred miles of where I live!

    Regards

    Tim Stockman

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    STOCKMAN ELECTRONICS
    Computers & Communications
    3 Young St
    BURRA 5417
    SOUTH AUSTRALIA
    Ph (08) 8892 2708
    Fax (08) 8892 2788
    Email tim.stockman@s...
    WEB www.stockmanelectronics.com.au
    Mobile 0418 811 725
    Mobile EMAIL tim.mobile@s...
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~!
    Original Message
    From: smartdim@a... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=4kPGlZio2Wp0qDYKdrgCF6ZDI1Mcp2FwghvTx-4Q8ZDvL1ssM0F4VCziZkKlm7_lU9i4R0rD7f8]smartdim@a...[/url
    Sent: Monday, 17 March 2003 8:35 AM
    To: basicstamps@yahoogroups.com
    Subject: Re: [noparse][[/noparse]basicstamps] Q for Aussie Stampers:- Variable reluctance
    pickup

    In a message dated 3/16/2003 1:51:20 PM Pacific Standard Time,
    tim.stockman@s... writes:

    > Hi Stampers,
    >
    > Does any Aussie stamper have a good, inexpensive source for a
    > variable reluctance pickup? Or has anyone had luck with a DIY version?
    >
    > I am thinking about using one from a crank angle sensor on an EFI
    > car, I just need to work out which car has the cheapest one!
    >
    >
    >
    > Regards
    >
    > Tim Stockman
    >

    Do you have what we call "Junk Yards" down under?


    [noparse][[/noparse]Non-text portions of this message have been removed]


    To UNSUBSCRIBE, just send mail to:
    basicstamps-unsubscribe@yahoogroups.com
    from the same email address that you subscribed. Text in the Subject and
    Body of the message will be ignored.


    Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Sign In or Register to comment.