need project help; who''s willing? (yes, i''m paying)
Archiver
Posts: 46,084
Hello,
Under the Support tab on our web site, the last item provides a listing
of Authorized Technical Consultants -
http://www.parallax.com/html_pages/tech/support/authorized_consultants.a
sp
For motor control, you might want to contact Solutions Cubed.
Consultant fees and arrangements vary, so it is necessary to contact
them directly for details.
Good Luck,
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8333
www.parallax.com
Original Message
From: a k [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=EKAukXQEnUG4PtVhXSrTCHoJjyPjU4eeZyge4xvVv6dcBD_SjPaIWdg5Yft8-_WwQivQ04TZ4bPk-g]bhtech2003@y...[/url
Sent: Thursday, March 13, 2003 7:54 AM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] need project help; who's willing? (yes, i'm
paying)
no takers yet, but in order to do this project you
need some specialized HW, the HW paltform already
exists, its just the need for a brain transplant that
thi project is all about-- and shipping it to Houston
is out of the question, we would have to meet weekly
for this project to work, and, for sure, there is no
travel budget-- sorry [noparse]:([/noparse] but if u know of anyone in
the NY area that you can recommend i would appreciate
it-- i would absolutely hate to have to do this
project myself.
Any thoughts??
--- Ricky Konvicka <rkonvicka@h...> wrote:
> You get any takers yet? I'm in the Houston area and
> have lots of free time
> at the moment.
>
Original Message
> From: "bhtech2003" <bhtech2003@y...>
> To: <basicstamps@yahoogroups.com>
> Sent: Wednesday, March 12, 2003 1:10 PM
> Subject: [noparse][[/noparse]basicstamps] need project help; who's
> willing? (yes, i'm paying)
>
>
> > Hi All;
> >
> > i'm in need of someone located in the NY area to
> help me with a
> > project that involves the STAMP, motors and
> sensors-- call it a suped
> > up version of the Boe-Bot. Basically i need
> someone who can program a
> > control loop of stamp->output to motor driving a
> wheel-> input from
> > sensor determining rotation -> stamp to do further
> processing. Should
> > take no more than a couple of weeks to do ( i
> would do it myself but
> > i am swamped) but the "someone" needs to have both
> STAMP experience
> > as well as hands-on motor and sensor
> characterization experience (
> > almost a given for the sophisticated in this
> group)
> >
> > Anyone interested send me an email.
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> > from the same email address that you subscribed.
> Text in the Subject and
> Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed.
> Text in the Subject and Body of the message will be
> ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
http://webhosting.yahoo.com
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Under the Support tab on our web site, the last item provides a listing
of Authorized Technical Consultants -
http://www.parallax.com/html_pages/tech/support/authorized_consultants.a
sp
For motor control, you might want to contact Solutions Cubed.
Consultant fees and arrangements vary, so it is necessary to contact
them directly for details.
Good Luck,
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8333
www.parallax.com
Original Message
From: a k [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=EKAukXQEnUG4PtVhXSrTCHoJjyPjU4eeZyge4xvVv6dcBD_SjPaIWdg5Yft8-_WwQivQ04TZ4bPk-g]bhtech2003@y...[/url
Sent: Thursday, March 13, 2003 7:54 AM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] need project help; who's willing? (yes, i'm
paying)
no takers yet, but in order to do this project you
need some specialized HW, the HW paltform already
exists, its just the need for a brain transplant that
thi project is all about-- and shipping it to Houston
is out of the question, we would have to meet weekly
for this project to work, and, for sure, there is no
travel budget-- sorry [noparse]:([/noparse] but if u know of anyone in
the NY area that you can recommend i would appreciate
it-- i would absolutely hate to have to do this
project myself.
Any thoughts??
--- Ricky Konvicka <rkonvicka@h...> wrote:
> You get any takers yet? I'm in the Houston area and
> have lots of free time
> at the moment.
>
Original Message
> From: "bhtech2003" <bhtech2003@y...>
> To: <basicstamps@yahoogroups.com>
> Sent: Wednesday, March 12, 2003 1:10 PM
> Subject: [noparse][[/noparse]basicstamps] need project help; who's
> willing? (yes, i'm paying)
>
>
> > Hi All;
> >
> > i'm in need of someone located in the NY area to
> help me with a
> > project that involves the STAMP, motors and
> sensors-- call it a suped
> > up version of the Boe-Bot. Basically i need
> someone who can program a
> > control loop of stamp->output to motor driving a
> wheel-> input from
> > sensor determining rotation -> stamp to do further
> processing. Should
> > take no more than a couple of weeks to do ( i
> would do it myself but
> > i am swamped) but the "someone" needs to have both
> STAMP experience
> > as well as hands-on motor and sensor
> characterization experience (
> > almost a given for the sophisticated in this
> group)
> >
> > Anyone interested send me an email.
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> > from the same email address that you subscribed.
> Text in the Subject and
> Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed.
> Text in the Subject and Body of the message will be
> ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
http://webhosting.yahoo.com
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/