Make the Boe-Bot a Crawler!
Archiver
Posts: 46,084
Hello Stampers,
A new add-on for your Boe-Bot converts it from a rolling robot to a
6-legged Crawler!
*******************
Crawler Kit
#30055 $39
*******************
Make your Boe-Bot a Crawler by adding the new Crawler accessory kit. The
kit includes printed documentation with detailed assembly instructions
showing you how to mount the legs to your Boe-Bot's chassis. The
complete assembly of the kit will take approximately 60 minutes and
requires a Phillips screwdriver and a small needle nosed pliers. The
Crawler runs on standard Boe-Bot code and includes one sample PBASIC
code in the printed documentation.
The Boe-Bot (and chassis) are not included. View the product page and
download the manual for at this link -
http://www.parallax.com/detail.asp?product_id=30055
The Crawler is in stock and ready for immediate shipment.
Sincerely,
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8333
www.parallax.com
A new add-on for your Boe-Bot converts it from a rolling robot to a
6-legged Crawler!
*******************
Crawler Kit
#30055 $39
*******************
Make your Boe-Bot a Crawler by adding the new Crawler accessory kit. The
kit includes printed documentation with detailed assembly instructions
showing you how to mount the legs to your Boe-Bot's chassis. The
complete assembly of the kit will take approximately 60 minutes and
requires a Phillips screwdriver and a small needle nosed pliers. The
Crawler runs on standard Boe-Bot code and includes one sample PBASIC
code in the printed documentation.
The Boe-Bot (and chassis) are not included. View the product page and
download the manual for at this link -
http://www.parallax.com/detail.asp?product_id=30055
The Crawler is in stock and ready for immediate shipment.
Sincerely,
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8333
www.parallax.com
Comments
-kerry
At 11:42 AM 3/7/03 -0800, you wrote:
>Hello Stampers,
>
>A new add-on for your Boe-Bot converts it from a rolling robot to a
>6-legged Crawler!
>
>*******************
>Crawler Kit
>#30055 $39
>*******************
>
>Make your Boe-Bot a Crawler by adding the new Crawler accessory kit. The
>kit includes printed documentation with detailed assembly instructions
>showing you how to mount the legs to your Boe-Bot's chassis. The
>complete assembly of the kit will take approximately 60 minutes and
>requires a Phillips screwdriver and a small needle nosed pliers. The
>Crawler runs on standard Boe-Bot code and includes one sample PBASIC
>code in the printed documentation.
>
>The Boe-Bot (and chassis) are not included. View the product page and
>download the manual for at this link -
>http://www.parallax.com/detail.asp?product_id=30055
>
>The Crawler is in stock and ready for immediate shipment.
>
>Sincerely,
>
>Erik Wood
>ewood@p...
>
>Parallax, Inc.
>599 Menlo Dr., Suite #100
>Rocklin, CA 95765
>(916) 624-8333
>www.parallax.com
>
>To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
>from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Very respectfully, your obedient servant.
Kerry
Admin@M...
WWW server hosting [url=Http://mntnweb.com]Http://mntnweb.com[/url]
Kerry Barlow
p.o. box 21
kirkwood ny
13795
607-775-1575
Pretty slick! I will have to get me one of those little "buggers"...
Is the kit compatible with the gripper attachment?
--Aaron
Original Message
From: Erik Wood [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=Ej_oKom3ltBPD8g8vooQ5ykUsNyhZ7IxVEPXlF9BFUpo5Tzytn5ZPNDYyCN801BHq-JvP8vGf4aAlGg]ewood@p...[/url
Sent: Friday, March 07, 2003 11:43 AM
To: basicstamps@yahoogroups.com; stampsinclass@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] Make the Boe-Bot a Crawler!
Hello Stampers,
A new add-on for your Boe-Bot converts it from a rolling robot to a
6-legged Crawler!
*******************
Crawler Kit
#30055 $39
*******************
Make your Boe-Bot a Crawler by adding the new Crawler accessory kit. The
kit includes printed documentation with detailed assembly instructions
showing you how to mount the legs to your Boe-Bot's chassis. The
complete assembly of the kit will take approximately 60 minutes and
requires a Phillips screwdriver and a small needle nosed pliers. The
Crawler runs on standard Boe-Bot code and includes one sample PBASIC
code in the printed documentation.
The Boe-Bot (and chassis) are not included. View the product page and
download the manual for at this link -
http://www.parallax.com/detail.asp?product_id=30055
The Crawler is in stock and ready for immediate shipment.
Sincerely,
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8333
www.parallax.com
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
It's really cool. We'll post some videos next week so customers can
see them in action.
I don't think it's compatible with the gripper attachment.
There is a bracket for the Crawler kit that mounts on each side which
extends beyond the front of the Boe-Bot chassis by about 1 inch. The
Gripper, when opening extends beyond this width.
It may be possible to make modifications to accommodate this set up, but
it isn't "recommended."
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8333
www.parallax.com
Original Message
From: Aaron Bond [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=QnisI5pvixY8c3Ltubf346SqIn5BFwq6zefCWVvr9gTkToeQeMeMKf36Qurv5YaBgTwiin0P2vIlD5g]abond@q...[/url
Sent: Friday, March 07, 2003 1:29 PM
To: basicstamps@yahoogroups.com
Subject: RE: [noparse][[/noparse]basicstamps] Make the Boe-Bot a Crawler!
Hi Erik,
Pretty slick! I will have to get me one of those little "buggers"...
Is the kit compatible with the gripper attachment?
--Aaron
Original Message
From: Erik Wood [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=Zxf7A8ZgMOB_g7MPY7F7374Q91P0QQp_cLcy2ZMQxwouA5vloucwOVEOhUER4x-H3Ixy8ks37UeDDg]ewood@p...[/url
Sent: Friday, March 07, 2003 11:43 AM
To: basicstamps@yahoogroups.com; stampsinclass@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] Make the Boe-Bot a Crawler!
Hello Stampers,
A new add-on for your Boe-Bot converts it from a rolling robot to a
6-legged Crawler!
*******************
Crawler Kit
#30055 $39
*******************
Make your Boe-Bot a Crawler by adding the new Crawler accessory kit. The
kit includes printed documentation with detailed assembly instructions
showing you how to mount the legs to your Boe-Bot's chassis. The
complete assembly of the kit will take approximately 60 minutes and
requires a Phillips screwdriver and a small needle nosed pliers. The
Crawler runs on standard Boe-Bot code and includes one sample PBASIC
code in the printed documentation.
The Boe-Bot (and chassis) are not included. View the product page and
download the manual for at this link -
http://www.parallax.com/detail.asp?product_id=30055
The Crawler is in stock and ready for immediate shipment.
Sincerely,
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8333
www.parallax.com
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Guess I'll just have to build another one! I am looking forward to the
videos!
--Aaron
Original Message
From: Erik Wood [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=QSnpPLhD0nde8itIGumSZqX4jNAaL9JljOl7ivNHfdyptUzTyMyZeE6DFPr1YZFToItVEiuaF-QfFi0h0Q]ewood@p...[/url
Sent: Friday, March 07, 2003 1:40 PM
To: basicstamps@yahoogroups.com
Subject: RE: [noparse][[/noparse]basicstamps] Make the Boe-Bot a Crawler!
Aaron,
It's really cool. We'll post some videos next week so customers can
see them in action.
I don't think it's compatible with the gripper attachment.
There is a bracket for the Crawler kit that mounts on each side which
extends beyond the front of the Boe-Bot chassis by about 1 inch. The
Gripper, when opening extends beyond this width. It may be possible to
make modifications to accommodate this set up, but it isn't
"recommended."
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8333
www.parallax.com
Original Message
From: Aaron Bond [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=tI2krgcOHJfnbO2wIVQ3L765shRr4ybG6sAIrxyq9BJPrfWOlzcjl3_tCpI8O3n1MgviQkuiIl4Ettw]abond@q...[/url
Sent: Friday, March 07, 2003 1:29 PM
To: basicstamps@yahoogroups.com
Subject: RE: [noparse][[/noparse]basicstamps] Make the Boe-Bot a Crawler!
Hi Erik,
Pretty slick! I will have to get me one of those little "buggers"...
Is the kit compatible with the gripper attachment?
--Aaron
Original Message
From: Erik Wood [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=QSnpPLhD0nde8itIGumSZqX4jNAaL9JljOl7ivNHfdyptUzTyMyZeE6DFPr1YZFToItVEiuaF-QfFi0h0Q]ewood@p...[/url
Sent: Friday, March 07, 2003 11:43 AM
To: basicstamps@yahoogroups.com; stampsinclass@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] Make the Boe-Bot a Crawler!
Hello Stampers,
A new add-on for your Boe-Bot converts it from a rolling robot to a
6-legged Crawler!
*******************
Crawler Kit
#30055 $39
*******************
Make your Boe-Bot a Crawler by adding the new Crawler accessory kit. The
kit includes printed documentation with detailed assembly instructions
showing you how to mount the legs to your Boe-Bot's chassis. The
complete assembly of the kit will take approximately 60 minutes and
requires a Phillips screwdriver and a small needle nosed pliers. The
Crawler runs on standard Boe-Bot code and includes one sample PBASIC
code in the printed documentation.
The Boe-Bot (and chassis) are not included. View the product page and
download the manual for at this link -
http://www.parallax.com/detail.asp?product_id=30055
The Crawler is in stock and ready for immediate shipment.
Sincerely,
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8333
www.parallax.com
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
weight as a BoE-Bot with wheels. I have a "custom" BoE-Bot with a bunch of
extra stuff on it that would look cool as a walker.
Original Message
> Hello Stampers,
>
> A new add-on for your Boe-Bot converts it from a rolling robot to a
> 6-legged Crawler!
>
> *******************
> Crawler Kit
> #30055 $39
> *******************
BTW-A Crawler video is now available online at the very bottom of this
page-
http://www.parallax.com/detail.asp?product_id=30055
Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr., Suite #100
Rocklin, CA 95765
(916) 624-8333
www.parallax.com
Original Message
From: Rodent [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=mzfqYb2EhvEdJNCpiTjuLo_2JGTAOdzhEeGOEcdGZvWM4UG6ujNr-SYN37z-ighWQS7WBj6GfMPseA]daweasel@s...[/url
Sent: Friday, March 07, 2003 2:57 PM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] Make the Boe-Bot a Crawler!
Hey, pretty cool. Just curious if they will support the same amount of
weight as a BoE-Bot with wheels. I have a "custom" BoE-Bot with a bunch
of extra stuff on it that would look cool as a walker.
Original Message
> Hello Stampers,
>
> A new add-on for your Boe-Bot converts it from a rolling robot to a
> 6-legged Crawler!
>
> *******************
> Crawler Kit
> #30055 $39
> *******************
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> It won't support as much weight as the Boe-Bot with
> wheels.
>
> BTW-A Crawler video is now available online at the
> very bottom of this
> page-
> http://www.parallax.com/detail.asp?product_id=30055
Erik,
I have plenty of BS2s...But no bots...But after
checking the link above, I think I just may have to
get one! That was pretty cool watching that little
"bugger" go!
=====
Chris Savage
Knight Designs
324 West Main Street
Montour Falls, NY 14865
(607) 535-6777
http://www.knightdesigns.com
__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
http://webhosting.yahoo.com