batt conections
Archiver
Posts: 46,084
Just wanted to check to see if this would be kosher to do
batt1[noparse][[/noparse] +] = bs2vin and ssc2vin and ext IO[noparse][[/noparse] +]
batt2 [noparse][[/noparse]+] = bs2 servo mtrs power and ssc servo mtrs [noparse][[/noparse]+]power
batt1 [noparse][[/noparse]-] = batt2[noparse][[/noparse]-] to sw1 from sw1 to vss [noparse][[/noparse]-]and ssc[noparse][[/noparse]-] and ext IO[noparse][[/noparse]-] and
servo bs2[noparse][[/noparse]-] and servo ssc[noparse][[/noparse]-]
My intent is to connect all [noparse][[/noparse]-] power sources togeather and switch them to all
units so if I turn off the switch I turn all items off and when I restart the
bs2 will start at top of program
There may be some reasons for not doing it this way so I thought I would ask
thanks max
[noparse][[/noparse]Non-text portions of this message have been removed]
batt1[noparse][[/noparse] +] = bs2vin and ssc2vin and ext IO[noparse][[/noparse] +]
batt2 [noparse][[/noparse]+] = bs2 servo mtrs power and ssc servo mtrs [noparse][[/noparse]+]power
batt1 [noparse][[/noparse]-] = batt2[noparse][[/noparse]-] to sw1 from sw1 to vss [noparse][[/noparse]-]and ssc[noparse][[/noparse]-] and ext IO[noparse][[/noparse]-] and
servo bs2[noparse][[/noparse]-] and servo ssc[noparse][[/noparse]-]
My intent is to connect all [noparse][[/noparse]-] power sources togeather and switch them to all
units so if I turn off the switch I turn all items off and when I restart the
bs2 will start at top of program
There may be some reasons for not doing it this way so I thought I would ask
thanks max
[noparse][[/noparse]Non-text portions of this message have been removed]