SV: [basicstamps] PBASIC
Archiver
Posts: 46,084
Greetings!
And even IF it won't run, he can always exit windoooze and run it under
DOS...
Besides, the DOS based STAMPxx editors seems to be very forgiving about what
they run on...
I run the STAMP2P version on an old HP PDA, and it also ran in a PC XT
emulator running DR DOS 7.01 on my current StrongARM based PDA. (Just a pity
that it can't handle the timing on the serial port)
Actually, the STAMP2P program is now the preferred text editor for
small(less than 64KB) files on my PDA...
:-)
Trygve
Who's just got a BS1-IC and a couple of SMALL motors in the mail...
Opprinnelig melding
Fra: jonwms@a... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=IlA2uaiM9SWMGRP9gfDdTi-8VIX3L6nwHLEZXVCjLBLaz9typr3h_pktOhON_S047lxzVp4]jonwms@a...[/url
Sendt: 13. august 2002 14:04
Til: basicstamps@yahoogroups.com
Emne: Re: [noparse][[/noparse]basicstamps] PBASIC
The Windows version of our editor requires at least Win95 to run. I'm
pretty
sure you can run the DOS version (STAMP2.EXE) under Win 3.11 -- but I
haven't
tried that in a long time.
-- Jon Williams
-- Parallax
In a message dated 8/13/02 1:43:02 AM Central Daylight Time,
m.mckenzie@c... writes:
> Will PBASIC for the Stamp 2 work under Windows 3.11??
>
> Can anyone send me the circuit diagram for the "Board of Education"
> especially the PSU area. I want to build up something similar to the BOE,
> 'cause in NZ the BOE kit is over $300 NZ but the chip is only $150.
>
[noparse][[/noparse]Non-text portions of this message have been removed]
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
And even IF it won't run, he can always exit windoooze and run it under
DOS...
Besides, the DOS based STAMPxx editors seems to be very forgiving about what
they run on...
I run the STAMP2P version on an old HP PDA, and it also ran in a PC XT
emulator running DR DOS 7.01 on my current StrongARM based PDA. (Just a pity
that it can't handle the timing on the serial port)
Actually, the STAMP2P program is now the preferred text editor for
small(less than 64KB) files on my PDA...
:-)
Trygve
Who's just got a BS1-IC and a couple of SMALL motors in the mail...
Opprinnelig melding
Fra: jonwms@a... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=IlA2uaiM9SWMGRP9gfDdTi-8VIX3L6nwHLEZXVCjLBLaz9typr3h_pktOhON_S047lxzVp4]jonwms@a...[/url
Sendt: 13. august 2002 14:04
Til: basicstamps@yahoogroups.com
Emne: Re: [noparse][[/noparse]basicstamps] PBASIC
The Windows version of our editor requires at least Win95 to run. I'm
pretty
sure you can run the DOS version (STAMP2.EXE) under Win 3.11 -- but I
haven't
tried that in a long time.
-- Jon Williams
-- Parallax
In a message dated 8/13/02 1:43:02 AM Central Daylight Time,
m.mckenzie@c... writes:
> Will PBASIC for the Stamp 2 work under Windows 3.11??
>
> Can anyone send me the circuit diagram for the "Board of Education"
> especially the PSU area. I want to build up something similar to the BOE,
> 'cause in NZ the BOE kit is over $300 NZ but the chip is only $150.
>
[noparse][[/noparse]Non-text portions of this message have been removed]
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/