Stamp and... Formant ?
Archiver
Posts: 46,084
Hi all,
Many years ago, I was interested in building my own analog synthesizer, on the
basis of the Formant. This analog modular synth was developped by Elektor. At
that moment, I had no time... and no money for this project.
Now, I'm thinking (and dreaming !) about this again.
I'm looking for all information about it (problems, tricks, bad and good
experience...). Maybe someone made a 'Stamped Formant'...
Did one of you ever built this synth ?
Thanks.
Phil.
[noparse][[/noparse]Non-text portions of this message have been removed]
Many years ago, I was interested in building my own analog synthesizer, on the
basis of the Formant. This analog modular synth was developped by Elektor. At
that moment, I had no time... and no money for this project.
Now, I'm thinking (and dreaming !) about this again.
I'm looking for all information about it (problems, tricks, bad and good
experience...). Maybe someone made a 'Stamped Formant'...
Did one of you ever built this synth ?
Thanks.
Phil.
[noparse][[/noparse]Non-text portions of this message have been removed]
Comments
>Hi all,
>
>Many years ago, I was interested in building my own analog synthesizer, on
>the basis of the Formant. This analog modular synth was developped by
>Elektor. At that moment, I had no time... and no money for this project.
>Now, I'm thinking (and dreaming !) about this again.
>I'm looking for all information about it (problems, tricks, bad and good
>experience...). Maybe someone made a 'Stamped Formant'...
>Did one of you ever built this synth ?
>Thanks.
>Phil.
>
>Phil -
Although it's not a Stamp based Formant, you may be interested in this
link which indicates what a task you may be facing:
http://www.euronet.nl/~rja/Emusic/Formant/
Regards,
Bruce Bates
>[noparse][[/noparse]Non-text portions of this message have been removed]
>
>
>To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
>from the same email address that you subscribed. Text in the Subject and
>Body of the message will be ignored.
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Thanks for your contribution... I've been surfing on this site this night
(in Belgium), I think it's the most complete and interesting site about the
Formant. As you say, it's beter to know how huge is the amount of work
needed !
Best regards,
Phil.
Original Message
From: "Bruce Bates" <bvbates@u...>
To: <basicstamps@yahoogroups.com>
Sent: Sunday, August 11, 2002 11:27 AM
Subject: Re: [noparse][[/noparse]basicstamps] Stamp and... Formant ?
> At 11:16 AM 8/11/2002 +0200, you wrote:
> >Hi all,
> >
> >Many years ago, I was interested in building my own analog synthesizer,
on
> >the basis of the Formant. This analog modular synth was developped by
> >Elektor. At that moment, I had no time... and no money for this project.
> >Now, I'm thinking (and dreaming !) about this again.
> >I'm looking for all information about it (problems, tricks, bad and good
> >experience...). Maybe someone made a 'Stamped Formant'...
> >Did one of you ever built this synth ?
> >Thanks.
> >Phil.
> >
> >Phil -
>
> Although it's not a Stamp based Formant, you may be interested in this
> link which indicates what a task you may be facing:
> http://www.euronet.nl/~rja/Emusic/Formant/
>
> Regards,
>
> Bruce Bates
>
>
>
> >[noparse][[/noparse]Non-text portions of this message have been removed]
> >
> >
> >To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> >from the same email address that you subscribed. Text in the Subject and
> >Body of the message will be ignored.
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
http://omega.tellus.vallentuna.se/anders/synthar.html . I am not sure how
you could use the Basic Stamp to control it. I guess you could program it to
be used as a sequencer.
-Blaize
Original Message
From: "Philippe Derenne" <derennep@b...>
To: <basicstamps@yahoogroups.com>
Sent: Sunday, August 11, 2002 5:16 AM
Subject: [noparse][[/noparse]basicstamps] Stamp and... Formant ?
> Hi all,
>
> Many years ago, I was interested in building my own analog synthesizer, on
the basis of the Formant. This analog modular synth was developped by
Elektor. At that moment, I had no time... and no money for this project.
> Now, I'm thinking (and dreaming !) about this again.
> I'm looking for all information about it (problems, tricks, bad and good
experience...). Maybe someone made a 'Stamped Formant'...
> Did one of you ever built this synth ?
> Thanks.
> Phil.
>
>
>
> [noparse][[/noparse]Non-text portions of this message have been removed]
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
Phil.
Original Message
From: "Blaize" <blaize_dsouza@h...>
To: <basicstamps@yahoogroups.com>
Sent: Monday, August 12, 2002 11:03 PM
Subject: Re: [noparse][[/noparse]basicstamps] Stamp and... Formant ?
> You can find some details about the Elektor Formant Synthesizer here:
> http://omega.tellus.vallentuna.se/anders/synthar.html . I am not sure how
> you could use the Basic Stamp to control it. I guess you could program it
to
> be used as a sequencer.
>
> -Blaize