battery pack holders
Archiver
Posts: 46,084
Hi all: Where can I get good quality AA battery holders in 4 cell
configuration. I need them in the 4 square mounted style, such as radio Smile
#270-383
I can't get any amperage at all out of the El-cheapo radio shack ones. I
tried new AA alkalines and still cant get enough amp output to work
properly. I only need 250 mah output, and cannot get that out of the RS junkers.
I have found my robot problem to be the battery pack/holder. if I use a
solderd nicad pack I can run the robot. as soon as I go to battery holders,
the robot wont run.
Thanks all.
Very respectfully, your obedient servant.
Kerry
Admin@M...
WWW server hosting [url=Http://mntnweb.com]Http://mntnweb.com[/url]
Kerry Barlow
p.o. box 21
kirkwood ny
13795
607-775-1575
configuration. I need them in the 4 square mounted style, such as radio Smile
#270-383
I can't get any amperage at all out of the El-cheapo radio shack ones. I
tried new AA alkalines and still cant get enough amp output to work
properly. I only need 250 mah output, and cannot get that out of the RS junkers.
I have found my robot problem to be the battery pack/holder. if I use a
solderd nicad pack I can run the robot. as soon as I go to battery holders,
the robot wont run.
Thanks all.
Very respectfully, your obedient servant.
Kerry
Admin@M...
WWW server hosting [url=Http://mntnweb.com]Http://mntnweb.com[/url]
Kerry Barlow
p.o. box 21
kirkwood ny
13795
607-775-1575
Comments
Look at the Keystone aluminum battery holders.
Original Message
> Hi all: Where can I get good quality AA battery holders in 4 cell
> configuration. I need them in the 4 square mounted style, such as radio
Smile
> #270-383
> I can't get any amperage at all out of the El-cheapo radio shack ones. I
> tried new AA alkalines and still cant get enough amp output to work
> properly. I only need 250 mah output, and cannot get that out of the RS
junkers.
> I have found my robot problem to be the battery pack/holder. if I use a
> solderd nicad pack I can run the robot. as soon as I go to battery
holders,
> the robot wont run.
They have a heavier guage wire that works a lot better.
Original Message
From: Kerry Barlow [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=T--cEfpC9txjDpfE1EIoS3w_GYLM3cbdoqgHM1N9Je0TKwZ38mu-wV720bx8a7imolulg8cQPM0A5g]admin@m...[/url
Sent: Friday, August 09, 2002 4:25 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] battery pack holders
Hi all: Where can I get good quality AA battery holders in 4 cell
configuration. I need them in the 4 square mounted style, such as radio Smile
#270-383
I can't get any amperage at all out of the El-cheapo radio shack ones. I
tried new AA alkalines and still cant get enough amp output to work
properly. I only need 250 mah output, and cannot get that out of the RS
junkers.
I have found my robot problem to be the battery pack/holder. if I use a
solderd nicad pack I can run the robot. as soon as I go to battery holders,
the robot wont run.
Thanks all.
Very respectfully, your obedient servant.
Kerry
Admin@M...
WWW server hosting [url=Http://mntnweb.com]Http://mntnweb.com[/url]
Kerry Barlow
p.o. box 21
kirkwood ny
13795
607-775-1575
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/