SV: [basicstamps] LITTLE STEPU CONTROLLER
Archiver
Posts: 46,084
Greetings!
You might start by telling us a bit more about your equipment.
But...
Unless you have some sort of rotary encoder or something you won't be able
to read the position.
:-)
Trygve
Opprinnelig melding
Fra: max powell [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=eFHl3ZGOS_lVE9H1Soi4A1n47AhpcyFaicD3zoqMu9CMIbulZN35uEs9mazHMnCSUoUi6VGNZR4]mpowell@t...[/url
Sendt: 29. juli 2002 12:28
Til: basicstamps@yahoogroups.com
Emne: [noparse][[/noparse]basicstamps] LITTLE STEPU CONTROLLER
WHAT CODE DO I USE TO READ THE CURRENT POSITION OF THE STEPPER MOTOR.
I TRIED A WRITE ON 10 AND A READ ON 11 DIDN'T WORK.ANY INFORMATION ANYONE
CAN GIVE WILL BE APPRECIATED
THANKS MAX
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
You might start by telling us a bit more about your equipment.
But...
Unless you have some sort of rotary encoder or something you won't be able
to read the position.
:-)
Trygve
Opprinnelig melding
Fra: max powell [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=eFHl3ZGOS_lVE9H1Soi4A1n47AhpcyFaicD3zoqMu9CMIbulZN35uEs9mazHMnCSUoUi6VGNZR4]mpowell@t...[/url
Sendt: 29. juli 2002 12:28
Til: basicstamps@yahoogroups.com
Emne: [noparse][[/noparse]basicstamps] LITTLE STEPU CONTROLLER
WHAT CODE DO I USE TO READ THE CURRENT POSITION OF THE STEPPER MOTOR.
I TRIED A WRITE ON 10 AND A READ ON 11 DIDN'T WORK.ANY INFORMATION ANYONE
CAN GIVE WILL BE APPRECIATED
THANKS MAX
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Comments
which controller, and where can I find the datasheets?
:-)
Trygve
Opprinnelig melding
Fra: max powell [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=FppCLR2W2ppCAnL3FJqkQtw6-AeSCeQmfm-yYdZYSIQ_5oywm79zuIZ1q_twPhi9QN3IaFBr7PL94P9wJA]mpowell@t...[/url
Sendt: 29. juli 2002 12:41
Til: basicstamps@yahoogroups.com
Emne: Re: [noparse][[/noparse]basicstamps] LITTLE STEPU CONTROLLER
Original Message
From: "Trygve Henriksen" <trygve.henriksen@v...>
To: <basicstamps@yahoogroups.com>
Sent: Monday, July 29, 2002 12:29 AM
Subject: SV: [noparse][[/noparse]basicstamps] LITTLE STEPU CONTROLLER
> Greetings!
>
> You might start by telling us a bit more about your equipment.
>
> But...
> Unless you have some sort of rotary encoder or something you won't be able
> to read the position.
>
> :-)
> Trygve
>
>
>
Opprinnelig melding
> Fra: max powell [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=FppCLR2W2ppCAnL3FJqkQtw6-AeSCeQmfm-yYdZYSIQ_5oywm79zuIZ1q_twPhi9QN3IaFBr7PL94P9wJA]mpowell@t...[/url
> Sendt: 29. juli 2002 12:28
> Til: basicstamps@yahoogroups.com
> Emne: [noparse][[/noparse]basicstamps] LITTLE STEPU CONTROLLER
>
>
> WHAT CODE DO I USE TO READ THE CURRENT POSITION OF THE STEPPER MOTOR.
> I TRIED A WRITE ON 10 AND A READ ON 11 DIDN'T WORK.ANY INFORMATION ANYONE
> CAN GIVE WILL BE APPRECIATED
> THANKS MAX
>
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
> Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
> ACORDING TO INFO WITH THE CONTROLLER IT SHOULD SEND BACK # OF COUNTS FROM
HOME POSITION WHEN SENT THE CODE "U" I DONT HAVE THAT INFORMATION AT HAND AT
PRESENT BUT THOUGHT SOMEONE MIGHT HAVE WORKED WITH IT AND MAY KNOW THAT
INFO.
THANKS MAX
>
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/