tilt measurement with ADXL202?
Archiver
Posts: 46,084
Hi everybody
I am a design studend and interested in using an ADXL202 with
a basic stamp for tilt measurement. Unfortunatly I am not very
familiar with programming. I could need a step by step tutorial or
at least any information about the subject I can get.
I would be glad if anybody could help me out.
Thanks
Gabriel Bensch, Berlin, Germany
I am a design studend and interested in using an ADXL202 with
a basic stamp for tilt measurement. Unfortunatly I am not very
familiar with programming. I could need a step by step tutorial or
at least any information about the subject I can get.
I would be glad if anybody could help me out.
Thanks
Gabriel Bensch, Berlin, Germany
Comments
One of the best tutorials I found is at http://www.tpub.com/progintro/
. A good reference for most forms of Basic, as well as other languages, is
at http://www.basicguru.com/ .
Hope these help!
Don
Original Message
From: "gabjamin" <gabriel.bensch@w...>
To: <basicstamps@yahoogroups.com>
Sent: Wednesday, June 05, 2002 1:51 AM
Subject: [noparse][[/noparse]basicstamps] tilt measurement with ADXL202?
> Hi everybody
>
> I am a design studend and interested in using an ADXL202 with
> a basic stamp for tilt measurement. Unfortunatly I am not very
> familiar with programming. I could need a step by step tutorial or
> at least any information about the subject I can get.
> I would be glad if anybody could help me out.
> Thanks
>
> Gabriel Bensch, Berlin, Germany
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
http://www.parallaxinc.com/downloads/Resources/ADXL202-210.pdf
Mit freundlichen Gr
programming part as I need a tilt sensor as well..
MIke B.
Original Message
From: "gabjamin" <gabriel.bensch@w...>
To: <basicstamps@yahoogroups.com>
Sent: Wednesday, June 05, 2002 1:51 AM
Subject: [noparse][[/noparse]basicstamps] tilt measurement with ADXL202?
> Hi everybody
>
> I am a design studend and interested in using an ADXL202 with
> a basic stamp for tilt measurement. Unfortunatly I am not very
> familiar with programming. I could need a step by step tutorial or
> at least any information about the subject I can get.
> I would be glad if anybody could help me out.
> Thanks
>
> Gabriel Bensch, Berlin, Germany
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
http://www.parallaxinc.com/downloads/Resources/ADXL202-210.pdf
Don
Original Message
From: "Mike Blier" <w6ffc@p...>
To: <basicstamps@yahoogroups.com>
Sent: Wednesday, June 05, 2002 4:16 PM
Subject: Re: [noparse][[/noparse]basicstamps] tilt measurement with ADXL202?
> You point me to the data sheet for the ADXl202 and I'll point you toward
the
> programming part as I need a tilt sensor as well..
>
> MIke B.
>
>
Original Message
> From: "gabjamin" <gabriel.bensch@w...>
> To: <basicstamps@yahoogroups.com>
> Sent: Wednesday, June 05, 2002 1:51 AM
> Subject: [noparse][[/noparse]basicstamps] tilt measurement with ADXL202?
>
>
> > Hi everybody
> >
> > I am a design studend and interested in using an ADXL202 with
> > a basic stamp for tilt measurement. Unfortunatly I am not very
> > familiar with programming. I could need a step by step tutorial or
> > at least any information about the subject I can get.
> > I would be glad if anybody could help me out.
> > Thanks
> >
> > Gabriel Bensch, Berlin, Germany
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> > from the same email address that you subscribed. Text in the Subject
and
> Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Included is one which gives code for both the BS1 & BS2 for use with the
ADXL202, used as a tilt sensor.
Dennis
Original Message
From: Mike Blier [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=SclwMpf2Vidh0kF6L0rqe0AoknCJvIndevWGKDM7BILRGnDoGZ2J2_hlC3oO_AxrEzswue16OQ]w6ffc@p...[/url
Sent: Wednesday, June 05, 2002 4:16 PM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] tilt measurement with ADXL202?
You point me to the data sheet for the ADXl202 and I'll point you toward
the programming part as I need a tilt sensor as well..
MIke B.
Original Message
From: "gabjamin" <gabriel.bensch@w...>
To: <basicstamps@yahoogroups.com>
Sent: Wednesday, June 05, 2002 1:51 AM
Subject: [noparse][[/noparse]basicstamps] tilt measurement with ADXL202?
> Hi everybody
>
> I am a design studend and interested in using an ADXL202 with a basic
> stamp for tilt measurement. Unfortunatly I am not very familiar with
> programming. I could need a step by step tutorial or at least any
> information about the subject I can get. I would be glad if anybody
> could help me out. Thanks
>
> Gabriel Bensch, Berlin, Germany
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject
> and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/