Programming the BS2sx using 2.4 GHz RF
Archiver
Posts: 46,084
Hello All,
I would like to know if anyone has any information regarding the
capabilities to re-program the BS2sx using a RF network. We have
integrated a 3rd party 2.4 GHz radio modem with the basic stamp.
Sending and Receiving data is not a problem with the radio module,
but it would be nice to have the re-programming capablity. Any
information would be greatly appreciated.
Regards
Steve
I would like to know if anyone has any information regarding the
capabilities to re-program the BS2sx using a RF network. We have
integrated a 3rd party 2.4 GHz radio modem with the basic stamp.
Sending and Receiving data is not a problem with the radio module,
but it would be nice to have the re-programming capablity. Any
information would be greatly appreciated.
Regards
Steve
Comments
There is one radio modem available from Ewave that is specifically
designed to program stamps remotely.
http://www.electrowave.com/products/superscreamer.shtml
Parallax also sells this modem, I believe.
It takes some special capabilities in the modem to supply the signals
necessary for programming the Stamp. I have a writeup on the
programming protocol at:
http://www.emesystems.com/BS2clone.htm
Tracy Allen
electronically monitored ecosystems
mailto:tracy@e...
http://www.emesystems.com
>Hello All,
>
> I would like to know if anyone has any information regarding the
>capabilities to re-program the BS2sx using a RF network. We have
>integrated a 3rd party 2.4 GHz radio modem with the basic stamp.
>Sending and Receiving data is not a problem with the radio module,
>but it would be nice to have the re-programming capablity. Any
>information would be greatly appreciated.
>
>Regards
>
>Steve