attachments
Archiver
Posts: 46,084
i wonder why i cant send attachments?
every time i send a small jpg to the group the message shows up but the pic
doesnt.
yet other people send attachments.
im confused!
normdoty@h...
and yes i know im sending them correctly, individuals get them fine.
>From: "jay_mann2000" <jay_mann2000@y...>
>Reply-To: basicstamps@yahoogroups.com
>To: basicstamps@yahoogroups.com
>Subject: [noparse][[/noparse]basicstamps] Single Seat Off Road Race Car - HELP
>Date: Mon, 11 Mar 2002 16:25:38 -0000
>
> >I am working on a dashboard system for a single-seat off road race
> >car used in the SAE Mini Baja Competition( I am a Electromechanical
> >Engineering Student at Wentworth in Boston) We are looking to sense
> >engine rpm and I need a way to output a digital pulse for
> >every 'spark' of the ignition (the spark happens on every revolution
> >even though the power stroke is every other) anyways.. I know there
> >are tachs out there that simply wrap around the spark plug wire. If
> >there is anyone who knows how to do this it would be greatly
> >appreciated.
> >
> >Additionally, The fuel level is being sensed using a float that
> >changes resistance proportionalto the height of the fuel (230-30 ohms
> >over full to empty range). What is the easiest way to condition this
> >signal to 0-5v without the luxury of dual supplies. (We are running
> >on 12v battery for power). I know how to do it using a differential
> >amplifier but that requires the use of a negative supply (I think).
> >
> >Any help will be greatly appreciated as we are working on this as we
> >speak.
>
>
>
>To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
>from the same email address that you subscribed. Text in the Subject and
>Body of the message will be ignored.
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
every time i send a small jpg to the group the message shows up but the pic
doesnt.
yet other people send attachments.
im confused!
normdoty@h...
and yes i know im sending them correctly, individuals get them fine.
>From: "jay_mann2000" <jay_mann2000@y...>
>Reply-To: basicstamps@yahoogroups.com
>To: basicstamps@yahoogroups.com
>Subject: [noparse][[/noparse]basicstamps] Single Seat Off Road Race Car - HELP
>Date: Mon, 11 Mar 2002 16:25:38 -0000
>
> >I am working on a dashboard system for a single-seat off road race
> >car used in the SAE Mini Baja Competition( I am a Electromechanical
> >Engineering Student at Wentworth in Boston) We are looking to sense
> >engine rpm and I need a way to output a digital pulse for
> >every 'spark' of the ignition (the spark happens on every revolution
> >even though the power stroke is every other) anyways.. I know there
> >are tachs out there that simply wrap around the spark plug wire. If
> >there is anyone who knows how to do this it would be greatly
> >appreciated.
> >
> >Additionally, The fuel level is being sensed using a float that
> >changes resistance proportionalto the height of the fuel (230-30 ohms
> >over full to empty range). What is the easiest way to condition this
> >signal to 0-5v without the luxury of dual supplies. (We are running
> >on 12v battery for power). I know how to do it using a differential
> >amplifier but that requires the use of a negative supply (I think).
> >
> >Any help will be greatly appreciated as we are working on this as we
> >speak.
>
>
>
>To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
>from the same email address that you subscribed. Text in the Subject and
>Body of the message will be ignored.
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Comments
owner.
Original Message
From: norman doty [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=XDEU2ee7OvWilsP4yJmFOVI70kSaW7Pn5QDsIm1Cq2bHAWqlSA8y62IoXsMDzIwNVLWjkA_JrakImy5vdg]normdoty@h...[/url
Sent: Monday, March 11, 2002 10:44 AM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] attachments
i wonder why i cant send attachments?
every time i send a small jpg to the group the message shows up but the pic
doesnt.
yet other people send attachments.
im confused!
normdoty@h...
and yes i know im sending them correctly, individuals get them fine.
>From: "jay_mann2000" <jay_mann2000@y...>
>Reply-To: basicstamps@yahoogroups.com
>To: basicstamps@yahoogroups.com
>Subject: [noparse][[/noparse]basicstamps] Single Seat Off Road Race Car - HELP
>Date: Mon, 11 Mar 2002 16:25:38 -0000
>
> >I am working on a dashboard system for a single-seat off road race
> >car used in the SAE Mini Baja Competition( I am a Electromechanical
> >Engineering Student at Wentworth in Boston) We are looking to sense
> >engine rpm and I need a way to output a digital pulse for
> >every 'spark' of the ignition (the spark happens on every revolution
> >even though the power stroke is every other) anyways.. I know there
> >are tachs out there that simply wrap around the spark plug wire. If
> >there is anyone who knows how to do this it would be greatly
> >appreciated.
> >
> >Additionally, The fuel level is being sensed using a float that
> >changes resistance proportionalto the height of the fuel (230-30 ohms
> >over full to empty range). What is the easiest way to condition this
> >signal to 0-5v without the luxury of dual supplies. (We are running
> >on 12v battery for power). I know how to do it using a differential
> >amplifier but that requires the use of a negative supply (I think).
> >
> >Any help will be greatly appreciated as we are working on this as we
> >speak.
>
>
>
>To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
>from the same email address that you subscribed. Text in the Subject and
>Body of the message will be ignored.
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>i wonder why i cant send attachments?
>every time i send a small jpg to the group the message shows up but the pic
>doesnt.
>yet other people send attachments.
>im confused!
>
>normdoty@h...
>and yes i know im sending them correctly, individuals get them fine.
>
Norm -
There were too many virus that were coming through, so the decision was
made to eliminate all attachments. There is a Yahoo Groups File Area for
the Stamp List if you wish to place files there.
Bruce
>i wonder why i cant send attachments?
>every time i send a small jpg to the group the message shows up but the pic
>doesnt.
>yet other people send attachments.
>im confused!
>
>normdoty@h...
>and yes i know im sending them correctly, individuals get them fine.
As it has been explained, attachments are not allowed in this group.
Typically if you want to share information such as a "would-be-attachment"
you would place your attachment at a URL address of your choice and provide
the direction to the URL in your E-mail to the list.
This method also keeps the bandwidth in the group manageable.
Beau Schwabe Mask Designer IV - ATL
National Semiconductor Wired Communications Division
500 Pinnacle Court, Suite 525 Mail Stop GA1 Norcross, GA 30071
http://groups.yahoo.com/group/basicstamps
You can log in using your Yahoo ID and put things in the files section.
Al Williams
AWC
* 8 channels of PWM
http://www.al-williams.com/awce/pak5.htm
>
Original Message
> From: Beau Schwabe [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=AxwvF9rLT9Imeiuxh8G3ARWDdeqlp4OrmOdCxAzuCZAczojnnIBHpntmR7N6JYH08cZjpo_0dX6M6D1xVbpT-nvJ]bschwabe@a...[/url
> Sent: Monday, March 11, 2002 2:13 PM
> To: basicstamps@yahoogroups.com
> Subject: RE: [noparse][[/noparse]basicstamps] attachments
>
>
>
> >
> >i wonder why i cant send attachments?
> >every time i send a small jpg to the group the message shows
> up but the
> >pic doesnt. yet other people send attachments.
> >im confused!
> >
> >normdoty@h...
> >and yes i know im sending them correctly, individuals get them fine.
>
> As it has been explained, attachments are not allowed in this group.
>
> Typically if you want to share information such as a
> "would-be-attachment" you would place your attachment at a
> URL address of your choice and provide the direction to the
> URL in your E-mail to the list.
>
> This method also keeps the bandwidth in the group manageable.
>
>
>
>
> Beau Schwabe Mask Designer IV - ATL
> National Semiconductor Wired Communications Division
> 500 Pinnacle Court, Suite 525 Mail Stop GA1 Norcross, GA 30071
>
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the
> Subject and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
transferred by Parallax and have upgraded my hard drive prior to
that, so I don't even know the old Parallax ID any Ideas??
Original Message
From: "Al Williams" <alw@a...>
To: <basicstamps@yahoogroups.com>
Sent: March 11, 2002 12:54 PM
Subject: RE: [noparse][[/noparse]basicstamps] attachments
I'll take this opportunity to point out again that if you go to
http://groups.yahoo.com/group/basicstamps
You can log in using your Yahoo ID and put things in the files
section.
Al Williams
AWC
* 8 channels of PWM
http://www.al-williams.com/awce/pak5.htm
>
Original Message
> From: Beau Schwabe [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=wp6NYapgh33f13c_VBEMYDU-LuvMlh138shFtj2uR6FXp2i-veRbByHMlZ0Q5NSXH5hV9McCuzbRZN9x9B5TVIdI]bschwabe@a...[/url
> Sent: Monday, March 11, 2002 2:13 PM
> To: basicstamps@yahoogroups.com
> Subject: RE: [noparse][[/noparse]basicstamps] attachments
>
>
>
> >
> >i wonder why i cant send attachments?
> >every time i send a small jpg to the group the message shows
> up but the
> >pic doesnt. yet other people send attachments.
> >im confused!
> >
> >normdoty@h...
> >and yes i know im sending them correctly, individuals get them
fine.
>
> As it has been explained, attachments are not allowed in this
group.
>
> Typically if you want to share information such as a
> "would-be-attachment" you would place your attachment at a
> URL address of your choice and provide the direction to the
> URL in your E-mail to the list.
>
> This method also keeps the bandwidth in the group manageable.
>
>
>
>
---
> Beau Schwabe Mask Designer IV - ATL
> National Semiconductor Wired Communications Division
> 500 Pinnacle Court, Suite 525 Mail Stop GA1 Norcross, GA
30071
>
---
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the
> Subject and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the
Subject and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
yahoo search does any good, no match found is all I can get
Original Message
From: "Larry Gaminde" <lgaminde@t...>
To: <basicstamps@yahoogroups.com>
Sent: March 11, 2002 2:10 PM
Subject: Re: [noparse][[/noparse]basicstamps] attachments
Ill take this opportunity to ask how to get my yahoo ID. I was
transferred by Parallax and have upgraded my hard drive prior to
that, so I don't even know the old Parallax ID any Ideas??
Original Message
From: "Al Williams" <alw@a...>
To: <basicstamps@yahoogroups.com>
Sent: March 11, 2002 12:54 PM
Subject: RE: [noparse][[/noparse]basicstamps] attachments
I'll take this opportunity to point out again that if you go to
http://groups.yahoo.com/group/basicstamps
You can log in using your Yahoo ID and put things in the files
section.
Al Williams
AWC
* 8 channels of PWM
http://www.al-williams.com/awce/pak5.htm
>
Original Message
> From: Beau Schwabe [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=Vya00SMg6aShF4P3vxJenY7yHoaFloYiwwC4keVz_rR1FAuaDPq6k3ZWleV6dQhQiLPItXTmw3aTswEtM0u6n5w]bschwabe@a...[/url
> Sent: Monday, March 11, 2002 2:13 PM
> To: basicstamps@yahoogroups.com
> Subject: RE: [noparse][[/noparse]basicstamps] attachments
>
>
>
> >
> >i wonder why i cant send attachments?
> >every time i send a small jpg to the group the message shows
> up but the
> >pic doesnt. yet other people send attachments.
> >im confused!
> >
> >normdoty@h...
> >and yes i know im sending them correctly, individuals get them
fine.
>
> As it has been explained, attachments are not allowed in this
group.
>
> Typically if you want to share information such as a
> "would-be-attachment" you would place your attachment at a
> URL address of your choice and provide the direction to the
> URL in your E-mail to the list.
>
> This method also keeps the bandwidth in the group manageable.
>
>
>
>
---
> Beau Schwabe Mask Designer IV - ATL
> National Semiconductor Wired Communications Division
> 500 Pinnacle Court, Suite 525 Mail Stop GA1 Norcross, GA
30071
>
---
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the
> Subject and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the
Subject and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the
Subject and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
AGAIN, but this time, tell it you don't want e-mail sent to you. You'll
still get e-mail on your old subscription, but you can log in to do all
the other features using your new id.
Al Williams
AWC
* Floating point math for the Stamp, PIC, SX, or any microcontroller
http://www.al-williams.com/awce/pak1.htm
>
Original Message
> From: Larry Gaminde [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=QkiDQ47K53wvEpxXCso8SNMDRwtvOiRXfCTIwdr_FCIflMB_7TgUwlDs_3BLxNGvJQzNa8DrtucttPgY73Q]lgaminde@t...[/url
> Sent: Monday, March 11, 2002 4:11 PM
> To: basicstamps@yahoogroups.com
> Subject: Re: [noparse][[/noparse]basicstamps] attachments
>
>
> Ill take this opportunity to ask how to get my yahoo ID. I
> was transferred by Parallax and have upgraded my hard drive
> prior to that, so I don't even know the old Parallax ID any Ideas??
>
>
>
Original Message
> From: "Al Williams" <alw@a...>
> To: <basicstamps@yahoogroups.com>
> Sent: March 11, 2002 12:54 PM
> Subject: RE: [noparse][[/noparse]basicstamps] attachments
>
>
> I'll take this opportunity to point out again that if you go
> to http://groups.yahoo.com/group/basicstamps
>
> You can log in using your Yahoo ID and put things in the
> files section.
>
> Al Williams
> AWC
> * 8 channels of PWM
> http://www.al-williams.com/awce/pak5.htm
>
>
>
> >
Original Message
> > From: Beau Schwabe [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=QjeC7KnnAML6GmqAQkqAmDtjhb2XykhUWwHNTn8Tjx0yPrv5bDwT--wsCnCJbbCr5lqUuUGb8J36XSntVGLqPNc]bschwabe@a...[/url
> > Sent: Monday, March 11, 2002 2:13 PM
> > To: basicstamps@yahoogroups.com
> > Subject: RE: [noparse][[/noparse]basicstamps] attachments
> >
> >
> >
> > >
> > >i wonder why i cant send attachments?
> > >every time i send a small jpg to the group the message shows
> > up but the
> > >pic doesnt. yet other people send attachments.
> > >im confused!
> > >
> > >normdoty@h...
> > >and yes i know im sending them correctly, individuals get them
> fine.
> >
> > As it has been explained, attachments are not allowed in this
> group.
> >
> > Typically if you want to share information such as a
> > "would-be-attachment" you would place your attachment at a
> URL address
> > of your choice and provide the direction to the URL in your
> E-mail to
> > the list.
> >
> > This method also keeps the bandwidth in the group manageable.
> >
> >
> >
> >
> ---
> > Beau Schwabe Mask Designer IV - ATL
> > National Semiconductor Wired Communications Division
> > 500 Pinnacle Court, Suite 525 Mail Stop GA1 Norcross, GA
> 30071
> >
> ---
> >
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> > from the same email address that you subscribed. Text in
> the Subject
> > and Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the
> Subject and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
thank you
Original Message
From: "Al Williams" <alw@a...>
To: <basicstamps@yahoogroups.com>
Sent: March 11, 2002 2:28 PM
Subject: RE: [noparse][[/noparse]basicstamps] attachments
I think the trick will be to make a new Yahoo ID, join the Stamp
list
AGAIN, but this time, tell it you don't want e-mail sent to you.
You'll
still get e-mail on your old subscription, but you can log in to
do all
the other features using your new id.
Al Williams
AWC
* Floating point math for the Stamp, PIC, SX, or any
microcontroller
http://www.al-williams.com/awce/pak1.htm
>
Original Message
> From: Larry Gaminde [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=uysMR8eauhBgnHuAlnhsgF-J5HjJFqC7Hj2hiwVIF1hnjoIVBnjv_llflzfP0mdbRF-i0Gc4VnFSI_ng]lgaminde@t...[/url
> Sent: Monday, March 11, 2002 4:11 PM
> To: basicstamps@yahoogroups.com
> Subject: Re: [noparse][[/noparse]basicstamps] attachments
>
>
> Ill take this opportunity to ask how to get my yahoo ID. I
> was transferred by Parallax and have upgraded my hard drive
> prior to that, so I don't even know the old Parallax ID any
Ideas??
>
>
>
Original Message
> From: "Al Williams" <alw@a...>
> To: <basicstamps@yahoogroups.com>
> Sent: March 11, 2002 12:54 PM
> Subject: RE: [noparse][[/noparse]basicstamps] attachments
>
>
> I'll take this opportunity to point out again that if you go
> to http://groups.yahoo.com/group/basicstamps
>
> You can log in using your Yahoo ID and put things in the
> files section.
>
> Al Williams
> AWC
> * 8 channels of PWM
> http://www.al-williams.com/awce/pak5.htm
>
>
>
> >
Original Message
> > From: Beau Schwabe [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=dubAzT-LYQ4D-VQK-2sgmhhACmL0-dC8A4jFWFGTvItIcr_NqnIHyFrL8yQjfpVO4ToFFY3dSwM2Iv1zPLE]bschwabe@a...[/url
> > Sent: Monday, March 11, 2002 2:13 PM
> > To: basicstamps@yahoogroups.com
> > Subject: RE: [noparse][[/noparse]basicstamps] attachments
> >
> >
> >
> > >
> > >i wonder why i cant send attachments?
> > >every time i send a small jpg to the group the message shows
> > up but the
> > >pic doesnt. yet other people send attachments.
> > >im confused!
> > >
> > >normdoty@h...
> > >and yes i know im sending them correctly, individuals get
them
> fine.
> >
> > As it has been explained, attachments are not allowed in this
> group.
> >
> > Typically if you want to share information such as a
> > "would-be-attachment" you would place your attachment at a
> URL address
> > of your choice and provide the direction to the URL in your
> E-mail to
> > the list.
> >
> > This method also keeps the bandwidth in the group manageable.
> >
> >
> >
>
>
> ---
> > Beau Schwabe Mask Designer IV - ATL
> > National Semiconductor Wired Communications Division
> > 500 Pinnacle Court, Suite 525 Mail Stop GA1 Norcross, GA
> 30071
>
>
> ---
> >
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> > from the same email address that you subscribed. Text in
> the Subject
> > and Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the
> Subject and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the
Subject
and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the
Subject and Body of the message will be ignored.
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>AH I see said the blind man!
(as he picked up his hammer and saw)
> I think the trick will be to make a new Yahoo ID, join the Stamp list
> AGAIN, but this time, tell it you don't want e-mail sent to you. You'll
> still get e-mail on your old subscription, but you can log in to do all
> the other features using your new id.
Additionally, you should be able to link your newly created yahooID to
your currently subscribed email address.
Mos.
I think that it looks similar to something I might've tried.. well.. we'll put
it this way, I understand how it works now that I have seen it!
THanks a lot,
Jeremy Manning
norman doty <normdoty@h...> wrote: i wonder why i cant send
attachments?
every time i send a small jpg to the group the message shows up but the pic
doesnt.
yet other people send attachments.
im confused!
normdoty@h...
and yes i know im sending them correctly, individuals get them fine.
>From: "jay_mann2000"
>Reply-To: basicstamps@yahoogroups.com
>To: basicstamps@yahoogroups.com
>Subject: [noparse][[/noparse]basicstamps] Single Seat Off Road Race Car - HELP
>Date: Mon, 11 Mar 2002 16:25:38 -0000
>
> >I am working on a dashboard system for a single-seat off road race
> >car used in the SAE Mini Baja Competition( I am a Electromechanical
> >Engineering Student at Wentworth in Boston) We are looking to sense
> >engine rpm and I need a way to output a digital pulse for
> >every 'spark' of the ignition (the spark happens on every revolution
> >even though the power stroke is every other) anyways.. I know there
> >are tachs out there that simply wrap around the spark plug wire. If
> >there is anyone who knows how to do this it would be greatly
> >appreciated.
> >
> >Additionally, The fuel level is being sensed using a float that
> >changes resistance proportionalto the height of the fuel (230-30 ohms
> >over full to empty range). What is the easiest way to condition this
> >signal to 0-5v without the luxury of dual supplies. (We are running
> >on 12v battery for power). I know how to do it using a differential
> >amplifier but that requires the use of a negative supply (I think).
> >
> >Any help will be greatly appreciated as we are working on this as we
> >speak.
>
>
>
>To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
>from the same email address that you subscribed. Text in the Subject and
>Body of the message will be ignored.
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and Body of
the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
[noparse][[/noparse]Non-text portions of this message have been removed]