Shop OBEX P1 Docs P2 Docs Learn Events
project work — Parallax Forums

project work

ArchiverArchiver Posts: 46,084
edited 2002-02-19 14:48 in General Discussion
Hi,

I have a small requirement for an RS485 network with about 7-10 nodes.
Controlled from a PC each node can have a BS2. I want to be able to
address each node and put out a 4 bit BCD code to control other
devices. Is anyone interested in taking this up as a project? please
let me know. I am not much into programming but I can build all the
hardware.

thanks in advance.
subhash.
sdendukuri@h...

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2002-02-19 12:35
    I haven't tried this but the zipped file contains information on how to do
    what I think your wanting to do.
    Check it out.

    > Hi,
    >
    > I have a small requirement for an RS485 network with about 7-10 nodes.
    > Controlled from a PC each node can have a BS2. I want to be able to
    > address each node and put out a 4 bit BCD code to control other
    > devices. Is anyone interested in taking this up as a project? please
    > let me know. I am not much into programming but I can build all the
    > hardware.
    >
    > thanks in advance.
    > subhash.



    [noparse][[/noparse]Non-text portions of this message have been removed]
  • ArchiverArchiver Posts: 46,084
    edited 2002-02-19 12:47
    Original Message
    From: "Gene Shults" <gshults@o...>
    To: <basicstamps@yahoogroups.com>
    Sent: Tuesday, February 19, 2002 6:35 AM
    Subject: Re: [noparse][[/noparse]basicstamps] project work


    > I haven't tried this but the zipped file contains information on how to do
    > what I think your wanting to do.
    > Check it out.
    >
    > > Hi,
    > >
    > > I have a small requirement for an RS485 network with about 7-10 nodes.
    > > Controlled from a PC each node can have a BS2. I want to be able to
    > > address each node and put out a 4 bit BCD code to control other
    > > devices. Is anyone interested in taking this up as a project? please
    > > let me know. I am not much into programming but I can build all the
    > > hardware.
    > >
    > > thanks in advance.
    > > subhash.
    >
    >
    >
    > [noparse][[/noparse]Non-text portions of this message have been removed]
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    Body of the message will be ignored.
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
    >


    [noparse][[/noparse]Non-text portions of this message have been removed]
  • ArchiverArchiver Posts: 46,084
    edited 2002-02-19 12:53
    I have tried to attach a zipped file to this message, is there a reason why
    it is not being attached when it goes to the group?? Does anyone know? I
    have tried it 2 times and still nothing. I know I can do it, I have tested
    it to another address.
    Original Message
    From: "Gene Shults" <gshults@o...>
    To: <basicstamps@yahoogroups.com>
    Sent: Tuesday, February 19, 2002 6:47 AM
    Subject: Re: [noparse][[/noparse]basicstamps] project work


    >
    >
    Original Message
    > From: "Gene Shults" <gshults@o...>
    > To: <basicstamps@yahoogroups.com>
    > Sent: Tuesday, February 19, 2002 6:35 AM
    > Subject: Re: [noparse][[/noparse]basicstamps] project work
    >
    >
    > > I haven't tried this but the zipped file contains information on how to
    do
    > > what I think your wanting to do.
    > > Check it out.
    > >
    > > > Hi,
    > > >
    > > > I have a small requirement for an RS485 network with about 7-10 nodes.
    > > > Controlled from a PC each node can have a BS2. I want to be able to
    > > > address each node and put out a 4 bit BCD code to control other
    > > > devices. Is anyone interested in taking this up as a project? please
    > > > let me know. I am not much into programming but I can build all the
    > > > hardware.
    > > >
    > > > thanks in advance.
    > > > subhash.
    > >
    > >
    > >
    > > [noparse][[/noparse]Non-text portions of this message have been removed]
    > >
    > >
    > > To UNSUBSCRIBE, just send mail to:
    > > basicstamps-unsubscribe@yahoogroups.com
    > > from the same email address that you subscribed. Text in the Subject
    and
    > Body of the message will be ignored.
    > >
    > >
    > > Your use of Yahoo! Groups is subject to
    http://docs.yahoo.com/info/terms/
    > >
    > >
    >
    >
    > [noparse][[/noparse]Non-text portions of this message have been removed]
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    Body of the message will be ignored.
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2002-02-19 12:57
    It is probably being filtered off, but some people only have slow
    connections so its not really fair to force them to wait while downloading
    an attachment. You can upload files to another area of the group and people
    can then download them if they wish. Have a look around yahoogroups to see
    how to go about uploading the file.

    Rgds,
    Chris

    Original Message
    From: "Gene Shults" <gshults@o...>
    To: <basicstamps@yahoogroups.com>
    Sent: Tuesday, February 19, 2002 8:53 PM
    Subject: Re: [noparse][[/noparse]basicstamps] project work


    > I have tried to attach a zipped file to this message, is there a reason
    why
    > it is not being attached when it goes to the group?? Does anyone know? I
    > have tried it 2 times and still nothing. I know I can do it, I have tested
    > it to another address.
    >
    >
    Original Message
    > From: "Gene Shults" <gshults@o...>
    > To: <basicstamps@yahoogroups.com>
    > Sent: Tuesday, February 19, 2002 6:47 AM
    > Subject: Re: [noparse][[/noparse]basicstamps] project work
    >
    >
    > >
    > >
    Original Message
    > > From: "Gene Shults" <gshults@o...>
    > > To: <basicstamps@yahoogroups.com>
    > > Sent: Tuesday, February 19, 2002 6:35 AM
    > > Subject: Re: [noparse][[/noparse]basicstamps] project work
    > >
    > >
    > > > I haven't tried this but the zipped file contains information on how
    to
    > do
    > > > what I think your wanting to do.
    > > > Check it out.
    > > >
    > > > > Hi,
    > > > >
    > > > > I have a small requirement for an RS485 network with about 7-10
    nodes.
    > > > > Controlled from a PC each node can have a BS2. I want to be able to
    > > > > address each node and put out a 4 bit BCD code to control other
    > > > > devices. Is anyone interested in taking this up as a project?
    please
    > > > > let me know. I am not much into programming but I can build all the
    > > > > hardware.
    > > > >
    > > > > thanks in advance.
    > > > > subhash.
    > > >
    > > >
    > > >
    > > > [noparse][[/noparse]Non-text portions of this message have been removed]
    > > >
    > > >
    > > > To UNSUBSCRIBE, just send mail to:
    > > > basicstamps-unsubscribe@yahoogroups.com
    > > > from the same email address that you subscribed. Text in the Subject
    > and
    > > Body of the message will be ignored.
    > > >
    > > >
    > > > Your use of Yahoo! Groups is subject to
    > http://docs.yahoo.com/info/terms/
    > > >
    > > >
    > >
    > >
    > > [noparse][[/noparse]Non-text portions of this message have been removed]
    > >
    > >
    > > To UNSUBSCRIBE, just send mail to:
    > > basicstamps-unsubscribe@yahoogroups.com
    > > from the same email address that you subscribed. Text in the Subject
    and
    > Body of the message will be ignored.
    > >
    > >
    > > Your use of Yahoo! Groups is subject to
    http://docs.yahoo.com/info/terms/
    > >
    > >
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    Body of the message will be ignored.
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2002-02-19 14:48
    At 07:53 02/19/02, Gene Shults wrote:
    >I have tried to attach a zipped file to this message, is there a reason why
    >it is not being attached when it goes to the group?? Does anyone know? I
    >have tried it 2 times and still nothing. I know I can do it, I have tested
    >it to another address.

    As protection against the transmission of viruses and trojans the list does
    not pass nontext content, including typical HTML email. If the file is of
    broad interest you can upload it to the list's file area on
    YahooGroups. If it's probably of interest only to the one person I'd ask
    him if he would like to receive a file of size XX KB directly, then send
    directly to him if he does.


    Jim H
Sign In or Register to comment.