Shop OBEX P1 Docs P2 Docs Learn Events
Schematic Wanted for BS-2 Module — Parallax Forums

Schematic Wanted for BS-2 Module

ArchiverArchiver Posts: 46,084
edited 2002-01-13 23:54 in General Discussion
I'm looking for a schematic and parts list for the Basic Stamp 2
Module. I already have a schematic for the OEM Basic Stamp 2, but I
don't think the BS-2 module is the same.

Thanks
Dave

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2002-01-13 05:04
    In a message dated 1/12/02 10:46:16 PM Central Standard Time,
    barrowman11@y... writes:


    > I'm looking for a schematic and parts list for the Basic Stamp 2
    > Module. I already have a schematic for the OEM Basic Stamp 2, but I
    > don't think the BS-2 module is the same.
    >

    The schematic is in the BASIC Stamp manual.

    -- Jon Williams
    -- Parallax


    [noparse][[/noparse]Non-text portions of this message have been removed]
  • ArchiverArchiver Posts: 46,084
    edited 2002-01-13 05:37
    Jon,
    I recently bought a Basic Stamp 2 Starter Kit which contains a Board
    of Education board and a BS-2, Rev.F. The manual is the BASIC Stamp
    Programming Manual, Ver. 2.0b.

    On page 10 of the manual is a pictorial layout drawing of the BASIC
    Stamp 2, but I don't see a schematic or parts list anywhere in the
    manual. Do I have the wrong book?

    Thanks
    Dave


    --- In basicstamps@y..., jonwms@a... wrote:
    > In a message dated 1/12/02 10:46:16 PM Central Standard Time,
    > barrowman11@y... writes:
    >
    >
    > > I'm looking for a schematic and parts list for the Basic Stamp 2
    > > Module. I already have a schematic for the OEM Basic Stamp 2, but
    I
    > > don't think the BS-2 module is the same.
    > >
    >
    > The schematic is in the BASIC Stamp manual.
    >
    > -- Jon Williams
    > -- Parallax
    >
    >
    > [noparse][[/noparse]Non-text portions of this message have been removed]
  • ArchiverArchiver Posts: 46,084
    edited 2002-01-13 14:22
    In a message dated 1/12/02 11:39:03 PM Central Standard Time,
    barrowman11@y... writes:


    > I recently bought a Basic Stamp 2 Starter Kit which contains a Board
    > of Education board and a BS-2, Rev.F. The manual is the BASIC Stamp
    > Programming Manual, Ver. 2.0b.
    >
    > On page 10 of the manual is a pictorial layout drawing of the BASIC
    > Stamp 2, but I don't see a schematic or parts list anywhere in the
    > manual.

    My mistake. The schematic is in the Ver 1.9 manual, but was removed from Ver
    2.0. It may have been removed because producing a BASIC Stamp module is
    really beyond anyone without pick-and-place tools and facilities.

    -- Jon Williams


    [noparse][[/noparse]Non-text portions of this message have been removed]
  • ArchiverArchiver Posts: 46,084
    edited 2002-01-13 16:44
    Page 13 of the new 2.0 manual lists the pins and what they do. Would
    this help?

    Leroy

    barrowman11 wrote:
    >
    > Jon,
    > I recently bought a Basic Stamp 2 Starter Kit which contains a Board
    > of Education board and a BS-2, Rev.F. The manual is the BASIC Stamp
    > Programming Manual, Ver. 2.0b.
    >
    > On page 10 of the manual is a pictorial layout drawing of the BASIC
    > Stamp 2, but I don't see a schematic or parts list anywhere in the
    > manual. Do I have the wrong book?
    >
    > Thanks
    > Dave
    >
    > --- In basicstamps@y..., jonwms@a... wrote:
    > > In a message dated 1/12/02 10:46:16 PM Central Standard Time,
    > > barrowman11@y... writes:
    > >
    > >
    > > > I'm looking for a schematic and parts list for the Basic Stamp 2
    > > > Module. I already have a schematic for the OEM Basic Stamp 2, but
    > I
    > > > don't think the BS-2 module is the same.
    > > >
    > >
    > > The schematic is in the BASIC Stamp manual.
    > >
    > > -- Jon Williams
    > > -- Parallax
    > >
    > >
    > > [noparse][[/noparse]Non-text portions of this message have been removed]
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and Body
    of the message will be ignored.
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
  • ArchiverArchiver Posts: 46,084
    edited 2002-01-13 23:54
    Hi,

    I still have the version 1.9 manual as pdf file.
    Other items (not only schematics) are also missing or rewritten or less
    informative in the version 2.0c manual.
    Send me your email address and I will send you the manual v1.9.

    Regards peter

    Oorspronkelijk bericht
    Van: jonwms@a... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=ewFTLJ8yfjN9ZCur7uhxAFBpkaZ9k24gSuZAZ3DVAfRCFm-2YIdmZ62sMV-3MayJDlrZ17v5BBkP]jonwms@a...[/url
    Verzonden: zondag 13 januari 2002 6:22
    Aan: basicstamps@yahoogroups.com
    Onderwerp: Re: [noparse][[/noparse]basicstamps] Re: Schematic Wanted for BS-2 Module

    In a message dated 1/12/02 11:39:03 PM Central Standard Time,
    barrowman11@y... writes:


    > I recently bought a Basic Stamp 2 Starter Kit which contains a Board
    > of Education board and a BS-2, Rev.F. The manual is the BASIC Stamp
    > Programming Manual, Ver. 2.0b.
    >
    > On page 10 of the manual is a pictorial layout drawing of the BASIC
    > Stamp 2, but I don't see a schematic or parts list anywhere in the
    > manual.

    My mistake. The schematic is in the Ver 1.9 manual, but was removed from
    Ver
    2.0. It may have been removed because producing a BASIC Stamp module is
    really beyond anyone without pick-and-place tools and facilities.

    -- Jon Williams


    [noparse][[/noparse]Non-text portions of this message have been removed]


    To UNSUBSCRIBE, just send mail to:
    basicstamps-unsubscribe@yahoogroups.com
    from the same email address that you subscribed. Text in the Subject and
    Body of the message will be ignored.


    Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Sign In or Register to comment.