Shop OBEX P1 Docs P2 Docs Learn Events
1-wire Weather station problem — Parallax Forums

1-wire Weather station problem

ArchiverArchiver Posts: 46,084
edited 2001-12-07 16:38 in General Discussion
Hello,
I have just received the 1-wire weather station by aag. I have version 3. Where
can I get ver 3 compatible PC software? I only could find ver 2.??
something(which is not compatible) on aag's web page.

P.S. Eventually I want to have this work with the BS2, but for now I want to get
it tested on my PC.

Thanks
Richard


[noparse][[/noparse]Non-text portions of this message have been removed]

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2001-12-06 20:58
    The PC software for the version 3 weather station is available on the AAG site
    at:

    http://www.aag.com.mx/RegContact.html

    If you do not get a response within an hour, email aag@a... and tell him
    what you need.

    Tim
  • ArchiverArchiver Posts: 46,084
    edited 2001-12-06 21:02
    Thanks again Tim.

    Richard
    Original Message
    From: <tbitson@a...>
    To: <basicstamps@yahoogroups.com>
    Sent: Thursday, December 06, 2001 3:58 PM
    Subject: Re: [noparse][[/noparse]basicstamps] 1-wire Weather station problem


    > The PC software for the version 3 weather station is available on the AAG
    site at:
    >
    > http://www.aag.com.mx/RegContact.html
    >
    > If you do not get a response within an hour, email aag@a... and tell
    him what you need.
    >
    > Tim
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    Body of the message will be ignored.
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2001-12-06 22:37
    Why spin your wheels twice?
    Original Message
    From: "Richard R." <rryerson@o...>
    To: "[noparse][[/noparse]basicstamps]" <basicstamps@yahoogroups.com>
    Sent: Thursday, December 06, 2001 10:57 AM
    Subject: [noparse][[/noparse]basicstamps] 1-wire Weather station problem


    > Hello,
    > I have just received the 1-wire weather station by aag. I have version 3.
    Where can I get ver 3 compatible PC software? I only could find ver 2.??
    something(which is not compatible) on aag's web page.
    >
    > P.S. Eventually I want to have this work with the BS2, but for now I want
    to get it tested on my PC.
    >
    > Thanks
    > Richard
    >
    >
    > [noparse][[/noparse]Non-text portions of this message have been removed]
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    Body of the message will be ignored.
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2001-12-06 22:49
    Well I have to sit down and program the stamp. With the PC I can make sure
    it is functioning and calibrated. I eventually want to set up auto weather
    recording using the stamp for a year.

    Richard
    Original Message
    From: "Stephen H Chapman" <chapman@t...>
    To: <basicstamps@yahoogroups.com>
    Sent: Thursday, December 06, 2001 5:37 PM
    Subject: Re: [noparse][[/noparse]basicstamps] 1-wire Weather station problem


    > Why spin your wheels twice?
    >
    Original Message
    > From: "Richard R." <rryerson@o...>
    > To: "[noparse][[/noparse]basicstamps]" <basicstamps@yahoogroups.com>
    > Sent: Thursday, December 06, 2001 10:57 AM
    > Subject: [noparse][[/noparse]basicstamps] 1-wire Weather station problem
    >
    >
    > > Hello,
    > > I have just received the 1-wire weather station by aag. I have version
    3.
    > Where can I get ver 3 compatible PC software? I only could find ver 2.??
    > something(which is not compatible) on aag's web page.
    > >
    > > P.S. Eventually I want to have this work with the BS2, but for now I
    want
    > to get it tested on my PC.
    > >
    > > Thanks
    > > Richard
    > >
    > >
    > > [noparse][[/noparse]Non-text portions of this message have been removed]
    > >
    > >
    > > To UNSUBSCRIBE, just send mail to:
    > > basicstamps-unsubscribe@yahoogroups.com
    > > from the same email address that you subscribed. Text in the Subject
    and
    > Body of the message will be ignored.
    > >
    > >
    > > Your use of Yahoo! Groups is subject to
    http://docs.yahoo.com/info/terms/
    > >
    > >
    > >
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    Body of the message will be ignored.
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2001-12-06 23:26
    Also, you can get and record the serial numbers of the 1-wire chips in your
    weather station. You'll need them later for Basic Stamp 1-wire commands.

    Another useful tool is iButton Viewer, part of Dallas Semiconductor's TMEX
    1-wire driver software. iButton viewer allows you to veiw, edit, and exercise
    the 1-wire devices. It can be downloaded from DalSemi's web site at
    www.ibutton.com

    Tim

    In a message dated Thu, 6 Dec 2001 5:50:02 PM Eastern Standard Time, "Richard
    R." <rryerson@o...> writes:

    > Well I have to sit down and program the stamp. With the PC I can make sure
    > it is functioning and calibrated. I eventually want to set up auto weather
    > recording using the stamp for a year.
    >
    > Richard
    >
    >
    Original Message
    > From: "Stephen H Chapman" <chapman@t...>
    > To: <basicstamps@yahoogroups.com>
    > Sent: Thursday, December 06, 2001 5:37 PM
    > Subject: Re: [noparse][[/noparse]basicstamps] 1-wire Weather station problem
    >
    >
    > > Why spin your wheels twice?
    > >
    Original Message
    > > From: "Richard R." <rryerson@o...>
    > > To: "[noparse][[/noparse]basicstamps]" <basicstamps@yahoogroups.com>
    > > Sent: Thursday, December 06, 2001 10:57 AM
    > > Subject: [noparse][[/noparse]basicstamps] 1-wire Weather station problem
    > >
    > >
    > > > Hello,
    > > > I have just received the 1-wire weather station by aag. I have version
    > 3.
    > > Where can I get ver 3 compatible PC software? I only could find ver 2.??
    > > something(which is not compatible) on aag's web page.
    > > >
    > > > P.S. Eventually I want to have this work with the BS2, but for now I
    > want
    > > to get it tested on my PC.
    > > >
    > > > Thanks
    > > > Richard
    > > >
    > > >
    > > > [noparse][[/noparse]Non-text portions of this message have been removed]
    > > >
    > > >
    > > > To UNSUBSCRIBE, just send mail to:
    > > > basicstamps-unsubscribe@yahoogroups.com
    > > > from the same email address that you subscribed. Text in the Subject
    > and
    > > Body of the message will be ignored.
    > > >
    > > >
    > > > Your use of Yahoo! Groups is subject to
    > http://docs.yahoo.com/info/terms/
    > > >
    > > >
    > > >
    > >
    > >
    > > To UNSUBSCRIBE, just send mail to:
    > > basicstamps-unsubscribe@yahoogroups.com
    > > from the same email address that you subscribed. Text in the Subject and
    > Body of the message will be ignored.
    > >
    > >
    > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    > >
    > >
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and Body
    of the message will be ignored.
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
  • ArchiverArchiver Posts: 46,084
    edited 2001-12-07 01:08
    Tim,
    I have been looking at your code for the BS2p from your web page. I am in
    the process of trying to adapt it to use with the basic stamp 2. I also have
    the ATOM which has 1-wire interface. I think this might be a better
    approach. However I need to get rid of your LCD commands, because I only
    have a 2x16 serial LCD. There are other minor differences between the stamp
    & the Atom I still have to work out as well.

    Feel free to throw a few tips my way.

    Richard
    Original Message
    From: <tbitson@a...>
    To: <basicstamps@yahoogroups.com>
    Sent: Thursday, December 06, 2001 6:26 PM
    Subject: Re: [noparse][[/noparse]basicstamps] 1-wire Weather station problem


    > Also, you can get and record the serial numbers of the 1-wire chips in
    your weather station. You'll need them later for Basic Stamp 1-wire
    commands.
    >
    > Another useful tool is iButton Viewer, part of Dallas Semiconductor's TMEX
    1-wire driver software. iButton viewer allows you to veiw, edit, and
    exercise the 1-wire devices. It can be downloaded from DalSemi's web site at
    www.ibutton.com
    >
    > Tim
    >
    > In a message dated Thu, 6 Dec 2001 5:50:02 PM Eastern Standard Time,
    "Richard R." <rryerson@o...> writes:
    >
    > > Well I have to sit down and program the stamp. With the PC I can make
    sure
    > > it is functioning and calibrated. I eventually want to set up auto
    weather
    > > recording using the stamp for a year.
    > >
    > > Richard
    > >
    > >
    Original Message
    > > From: "Stephen H Chapman" <chapman@t...>
    > > To: <basicstamps@yahoogroups.com>
    > > Sent: Thursday, December 06, 2001 5:37 PM
    > > Subject: Re: [noparse][[/noparse]basicstamps] 1-wire Weather station problem
    > >
    > >
    > > > Why spin your wheels twice?
    > > >
    Original Message
    > > > From: "Richard R." <rryerson@o...>
    > > > To: "[noparse][[/noparse]basicstamps]" <basicstamps@yahoogroups.com>
    > > > Sent: Thursday, December 06, 2001 10:57 AM
    > > > Subject: [noparse][[/noparse]basicstamps] 1-wire Weather station problem
    > > >
    > > >
    > > > > Hello,
    > > > > I have just received the 1-wire weather station by aag. I have
    version
    > > 3.
    > > > Where can I get ver 3 compatible PC software? I only could find ver
    2.??
    > > > something(which is not compatible) on aag's web page.
    > > > >
    > > > > P.S. Eventually I want to have this work with the BS2, but for now I
    > > want
    > > > to get it tested on my PC.
    > > > >
    > > > > Thanks
    > > > > Richard
    > > > >
    > > > >
    > > > > [noparse][[/noparse]Non-text portions of this message have been removed]
    > > > >
    > > > >
    > > > > To UNSUBSCRIBE, just send mail to:
    > > > > basicstamps-unsubscribe@yahoogroups.com
    > > > > from the same email address that you subscribed. Text in the
    Subject
    > > and
    > > > Body of the message will be ignored.
    > > > >
    > > > >
    > > > > Your use of Yahoo! Groups is subject to
    > > http://docs.yahoo.com/info/terms/
    > > > >
    > > > >
    > > > >
    > > >
    > > >
    > > > To UNSUBSCRIBE, just send mail to:
    > > > basicstamps-unsubscribe@yahoogroups.com
    > > > from the same email address that you subscribed. Text in the Subject
    and
    > > Body of the message will be ignored.
    > > >
    > > >
    > > > Your use of Yahoo! Groups is subject to
    http://docs.yahoo.com/info/terms/
    > > >
    > > >
    > >
    > >
    > > To UNSUBSCRIBE, just send mail to:
    > > basicstamps-unsubscribe@yahoogroups.com
    > > from the same email address that you subscribed. Text in the Subject
    and Body of the message will be ignored.
    > >
    > >
    > > Your use of Yahoo! Groups is subject to
    http://docs.yahoo.com/info/terms/
    >
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    Body of the message will be ignored.
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2001-12-07 15:57
    Richard,

    when you say you're adapting it to a BS2, are you using some sort of an
    interface chip or adapter?

    Tim



    In a message dated 12/6/01 6:10:58 PM, rryerson@o... writes:
    << Tim,
    I have been looking at your code for the BS2p from your web page. I am in
    the process of trying to adapt it to use with the basic stamp 2. I also have
    the ATOM which has 1-wire interface. I think this might be a better
    approach. However I need to get rid of your LCD commands, because I only
    have a 2x16 serial LCD. There are other minor differences between the stamp
    & the Atom I still have to work out as well.

    Feel free to throw a few tips my way.

    Richard >>
  • ArchiverArchiver Posts: 46,084
    edited 2001-12-07 16:38
    Tim,
    I have the DS9097U that came with the weather kit. I am also looking into
    using it with my Psion 3mx palmtop computer. I haven't really looked closely
    at doing this so it will be sometime before I can confirm that this will
    actually be possible.
    Right now AAG still have not replied to several emails regarding PC
    software ver 3 for the 1 wire weather station. Tim, do you have any other
    suggestions on getting this software? Do you have a copy you can send me. I
    have no idea why they are ignoring me. After all they got my money.

    Thanks
    Richard
    Original Message
    From: <tbitson@a...>
    To: <basicstamps@yahoogroups.com>
    Sent: Friday, December 07, 2001 10:57 AM
    Subject: Re: [noparse][[/noparse]basicstamps] 1-wire Weather station problem


    > Richard,
    >
    > when you say you're adapting it to a BS2, are you using some sort of an
    > interface chip or adapter?
    >
    > Tim
    >
    >
    >
    > In a message dated 12/6/01 6:10:58 PM,
Sign In or Register to comment.