BS2SX and BS2 sharing components. Is that possible?
Archiver
Posts: 46,084
> I would like to network the Bs2sx and the BS2. However, I would like
> to know if both stamps can share the following components:
>
> DS1620 temperature chip
> DS1302 real time clock chip
> Scott Edwards 2x16 serial LCD
> QV306M4 voice chip
If the I/O can be tri-stated, I think it would work. You want to make
sure that one stamp is forcing a line load low or high when the
device is trying to send data to the second stamp.
Paul
> to know if both stamps can share the following components:
>
> DS1620 temperature chip
> DS1302 real time clock chip
> Scott Edwards 2x16 serial LCD
> QV306M4 voice chip
If the I/O can be tri-stated, I think it would work. You want to make
sure that one stamp is forcing a line load low or high when the
device is trying to send data to the second stamp.
Paul
Comments
I would like to network the Bs2sx and the BS2. However, I would like
to know if both stamps can share the following components:
DS1620 temperature chip
DS1302 real time clock chip
Scott Edwards 2x16 serial LCD
QV306M4 voice chip
If so, what connections are necessary. As always, any input would be
appreciated.
Sincerely,
RP
I would like to network the Bs2sx and the BS2. However, I would like
to know if both stamps can share the following components:
DS1620 temperature chip
DS1302 real time clock chip
Scott Edwards 2x16 serial LCD
QV306M4 voice chip
If so, what connections are necessary. As always, any input would be
appreciated.
Sincerely,
RP