Simulation
Archiver
Posts: 46,084
Is there anyway to use the stamp editor ( Parallax v1.1 )as a
simulation program, Ie : to have it function without the stamp
connected but to receive the terminal output information.
simulation program, Ie : to have it function without the stamp
connected but to receive the terminal output information.
Comments
There is no simulator for the BS2 (that I know of)
but a free BS1 emulator is available at
http://www.al-williams.com/awce/bs1emu.htm
It does not emulate button, debug, serin and serour
regards peter
Oorspronkelijk bericht
Van: josewitter@y... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=i91MsazRVbN8l4m8rxQEi-3-VRvrYqiVXasKZ6mGueM5DdbgscYQ_AKcM_tj0RH_SIzesmZS7qt8Rg]josewitter@y...[/url
Verzonden: dinsdag 2 oktober 2001 19:59
Aan: basicstamps@yahoogroups.com
Onderwerp: [noparse][[/noparse]basicstamps] Simulation
Is there anyway to use the stamp editor ( Parallax v1.1 )as a
simulation program, Ie : to have it function without the stamp
connected but to receive the terminal output information.
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Unified Modelling Language" (uml)
Nick
Original Message
From: "Peter Verkaik" <peterverkaik@b...>
To: <basicstamps@yahoogroups.com>
Sent: Tuesday, October 02, 2001 8:18 PM
Subject: RE: [noparse][[/noparse]basicstamps] Simulation
> Hi,
>
> There is no simulator for the BS2 (that I know of)
> but a free BS1 emulator is available at
> http://www.al-williams.com/awce/bs1emu.htm
> It does not emulate button, debug, serin and serour
>
> regards peter
>
>
Oorspronkelijk bericht
> Van: josewitter@y... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=DAuIxPKsBPVBAWUyDTKT8Qw6OBGBNRT3zmRGb8gwir8RJj6JO0ebOpS8pI3EueNiF75WNlgIjJsJAGIv]josewitter@y...[/url
> Verzonden: dinsdag 2 oktober 2001 19:59
> Aan: basicstamps@yahoogroups.com
> Onderwerp: [noparse][[/noparse]basicstamps] Simulation
>
>
> Is there anyway to use the stamp editor ( Parallax v1.1 )as a
> simulation program, Ie : to have it function without the stamp
> connected but to receive the terminal output information.
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
> Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Take a look at
http://www.rational.com/uml/index.jsp
It should provide you the necessary information
regards peter
Oorspronkelijk bericht
Van: Nick Messenger [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=0vLa-wp3Z8si64o5Lq8JoComQ3kniq9BC7rehEA3VYKuc4GSksmIfi4NZRAHhkpGKryhbbidN54cTVdxcaIEMqIge5tAIA]nick@m...[/url
Verzonden: dinsdag 2 oktober 2001 20:38
Aan: basicstamps@yahoogroups.com
Onderwerp: Re: [noparse][[/noparse]basicstamps] Simulation
Can anybody help me with this non stamp related question: "What is the
Unified Modelling Language" (uml)
Nick
Original Message
From: "Peter Verkaik" <peterverkaik@b...>
To: <basicstamps@yahoogroups.com>
Sent: Tuesday, October 02, 2001 8:18 PM
Subject: RE: [noparse][[/noparse]basicstamps] Simulation
> Hi,
>
> There is no simulator for the BS2 (that I know of)
> but a free BS1 emulator is available at
> http://www.al-williams.com/awce/bs1emu.htm
> It does not emulate button, debug, serin and serour
>
> regards peter
>
>
Oorspronkelijk bericht
> Van: josewitter@y... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=oiT-X_DKs2IukapjAdXUf9OaG5X5xZzdPVao5-DZZ5lQeAZ44oFDhHTNqwW7BLmcSwz_iVwCKQuEqmhIKts]josewitter@y...[/url
> Verzonden: dinsdag 2 oktober 2001 19:59
> Aan: basicstamps@yahoogroups.com
> Onderwerp: [noparse][[/noparse]basicstamps] Simulation
>
>
> Is there anyway to use the stamp editor ( Parallax v1.1 )as a
> simulation program, Ie : to have it function without the stamp
> connected but to receive the terminal output information.
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
> Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
out the "objects" for their applications.....but it doesnt really
construct anything like you might expect.......from my point of view
as a junior programmer......its a way for senior developers to waste
huge amounts of time while they pre-design the application, before they
design the application..........this is done to save time and money.
just my 2
Dave
Original Message
From: Peter Verkaik <peterverkaik@b...>
To: <basicstamps@yahoogroups.com>
Sent: Tuesday, October 02, 2001 2:46 PM
Subject: RE: [noparse][[/noparse]basicstamps] Simulation
> Hi,
>
> Take a look at
> http://www.rational.com/uml/index.jsp
> It should provide you the necessary information
>
> regards peter
>
>
>
Oorspronkelijk bericht
> Van: Nick Messenger [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=M1rBRURgdCwB_0VqWUj66QN-2W2pMzpFOygf7IawlM4sPrAKG-PuQNezIfUlIbn37ubvvzg4EG9H8qjcDbDHmLOQspjX0EW2]nick@m...[/url
> Verzonden: dinsdag 2 oktober 2001 20:38
> Aan: basicstamps@yahoogroups.com
> Onderwerp: Re: [noparse][[/noparse]basicstamps] Simulation
>
>
> Can anybody help me with this non stamp related question: "What is the
> Unified Modelling Language" (uml)
>
> Nick
>
>
Original Message
> From: "Peter Verkaik" <peterverkaik@b...>
> To: <basicstamps@yahoogroups.com>
> Sent: Tuesday, October 02, 2001 8:18 PM
> Subject: RE: [noparse][[/noparse]basicstamps] Simulation
>
>
> > Hi,
> >
> > There is no simulator for the BS2 (that I know of)
> > but a free BS1 emulator is available at
> > http://www.al-williams.com/awce/bs1emu.htm
> > It does not emulate button, debug, serin and serour
> >
> > regards peter
> >
> >
Oorspronkelijk bericht
> > Van: josewitter@y... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=HnxuPc-OpgzIjpwwQ752RjE7ikbGdggnreFIY8DzzdCH8gJM-a9NHt4ovvpYDYZ68GAhFzelxAMnq12q]josewitter@y...[/url
> > Verzonden: dinsdag 2 oktober 2001 19:59
> > Aan: basicstamps@yahoogroups.com
> > Onderwerp: [noparse][[/noparse]basicstamps] Simulation
> >
> >
> > Is there anyway to use the stamp editor ( Parallax v1.1 )as a
> > simulation program, Ie : to have it function without the stamp
> > connected but to receive the terminal output information.
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> > from the same email address that you subscribed. Text in the Subject
and
> > Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> > from the same email address that you subscribed. Text in the Subject
and
> Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
> Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>