Can''t run the Stampworks Basic Stamp editor on a P4!!!
Archiver
Posts: 46,084
Hey,
I fixed that problem. It is the board that comes with the stampworks
kit. Here is the link:
http://www.parallaxinc.com/html_files/products/BS_Kits/stampworks.asp
--- In basicstamps@y..., "rad0" <rden25@m...> wrote:
> what is the universal training board? do you have a link? thanks
>
>
>
Original Message
> From: <rpsu279@y...>
> To: <basicstamps@y...>
> Sent: Thursday, September 13, 2001 5:18 PM
> Subject: [noparse][[/noparse]basicstamps] Can't run the Stampworks Basic Stamp editor
on a
> P4!!!
>
>
> > Hey guys,
> > I own a Stampworks kit. At my home, I have a Celeron and it runs
fine
> > and I can download codes to my Universal Training Board w/o any
> > problems. I come to school and use a Pentium IV PC. I had no
problem
> > with installation on a PC or even running the editor off the PC.
When
> > it comes time to download the code to the BS2, I get the following
> > error message:
> >
> > Basic Stamp 2 is not found on any COM port.
> >
> > 1. Check serial cable connection.
> > 2. Verify loopback connection between RTS and DSR.
> >
> > I understand the first one and I know the connection is correct.
> > However, what does the second error mean and how can I fix it?
> > Any help would be appreciated.
> >
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@y...
> > from the same email address that you subscribed. Text in the
Subject and
> Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
I fixed that problem. It is the board that comes with the stampworks
kit. Here is the link:
http://www.parallaxinc.com/html_files/products/BS_Kits/stampworks.asp
--- In basicstamps@y..., "rad0" <rden25@m...> wrote:
> what is the universal training board? do you have a link? thanks
>
>
>
Original Message
> From: <rpsu279@y...>
> To: <basicstamps@y...>
> Sent: Thursday, September 13, 2001 5:18 PM
> Subject: [noparse][[/noparse]basicstamps] Can't run the Stampworks Basic Stamp editor
on a
> P4!!!
>
>
> > Hey guys,
> > I own a Stampworks kit. At my home, I have a Celeron and it runs
fine
> > and I can download codes to my Universal Training Board w/o any
> > problems. I come to school and use a Pentium IV PC. I had no
problem
> > with installation on a PC or even running the editor off the PC.
When
> > it comes time to download the code to the BS2, I get the following
> > error message:
> >
> > Basic Stamp 2 is not found on any COM port.
> >
> > 1. Check serial cable connection.
> > 2. Verify loopback connection between RTS and DSR.
> >
> > I understand the first one and I know the connection is correct.
> > However, what does the second error mean and how can I fix it?
> > Any help would be appreciated.
> >
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@y...
> > from the same email address that you subscribed. Text in the
Subject and
> Body of the message will be ignored.
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >