IDE interface for the stamp
Archiver
Posts: 46,084
Hi Stampers need your advice.
I am considering the build and design of an IDE or drive interface for
the Stamp. Question is what is needed? Some thoughts:
1.44 meg floppy
small hard drive (IDE 6 GIG or so)
CDR/RW CD-ROM
If you would give me your opinion as to which one of these might be most
useful on a scale of 1-10, with 10 be very useful, I would be most
appreciative. Off list would be most appropriate for your response. I
will need some help with the design build as well, so if you have an
interest and would like to get involved, please contact me off list.
Kind Regards,
Leroy
--
*******************************************************
* Leroy Hall *
* 317 Cherokee Drive *
* Loveland, Ohio - USA 45140-2404 *
*******************************************************
* Phone: (513) 697-7539 *
* Cell : (513) 300-8632 *
* Email: leroy@f... *
* Home page URL: http://home.fuse.net/leroy/ *
* Resume URL: http://home.fuse.net/leroy/resume.htm *
*******************************************************
* Leroy Hall *
* 317 Cherokee Drive *
* Loveland, Ohio - USA 45140-2404 *
*******************************************************
I am considering the build and design of an IDE or drive interface for
the Stamp. Question is what is needed? Some thoughts:
1.44 meg floppy
small hard drive (IDE 6 GIG or so)
CDR/RW CD-ROM
If you would give me your opinion as to which one of these might be most
useful on a scale of 1-10, with 10 be very useful, I would be most
appreciative. Off list would be most appropriate for your response. I
will need some help with the design build as well, so if you have an
interest and would like to get involved, please contact me off list.
Kind Regards,
Leroy
--
*******************************************************
* Leroy Hall *
* 317 Cherokee Drive *
* Loveland, Ohio - USA 45140-2404 *
*******************************************************
* Phone: (513) 697-7539 *
* Cell : (513) 300-8632 *
* Email: leroy@f... *
* Home page URL: http://home.fuse.net/leroy/ *
* Resume URL: http://home.fuse.net/leroy/resume.htm *
*******************************************************
* Leroy Hall *
* 317 Cherokee Drive *
* Loveland, Ohio - USA 45140-2404 *
*******************************************************
Comments
http://www.billweller.com/basic_stamp/basic_stamp.htm
Barry Michels has just finished a prototype, and I will
try to present that info as it becomes available.
Bill Weller
Original Message
From: Leroy Hall, Senior [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=KHbHrDykGWAVOaeQEko_7RKihOARU2T7vr7FCH5pjjnzOPPNGIbX73kRMBIwHrIJ57crxw]leroy@f...[/url
Sent: Friday, August 17, 2001 9:18 AM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] IDE interface for the stamp
Hi Stampers need your advice.
I am considering the build and design of an IDE or drive interface for
the Stamp. Question is what is needed? Some thoughts:
1.44 meg floppy
small hard drive (IDE 6 GIG or so)
CDR/RW CD-ROM
If you would give me your opinion as to which one of these might be most
useful on a scale of 1-10, with 10 be very useful, I would be most
appreciative. Off list would be most appropriate for your response. I
will need some help with the design build as well, so if you have an
interest and would like to get involved, please contact me off list.
Kind Regards,
Leroy
--
*******************************************************
* Leroy Hall *
* 317 Cherokee Drive *
* Loveland, Ohio - USA 45140-2404 *
*******************************************************
* Phone: (513) 697-7539 *
* Cell : (513) 300-8632 *
* Email: leroy@f... *
* Home page URL: http://home.fuse.net/leroy/ *
* Resume URL: http://home.fuse.net/leroy/resume.htm *
*******************************************************
* Leroy Hall *
* 317 Cherokee Drive *
* Loveland, Ohio - USA 45140-2404 *
*******************************************************
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/