Controller/ HMI software for the Basic Stamp
Archiver
Posts: 46,084
Brad Watts / AMT
E-mail BradWatts@a...
Web www.amt.nb.ca
Original Message
From: Brad Watts [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=sOcies1qZ9O-HiLQudA4v3l0u763FvL522P-20nXARCDWRG2Wt_P3cxIn9-Wjg2Yam4z2c9W8M3LBvZ--DHSQQ]BradWatts@b...[/url
Sent: Monday, July 02, 2001 9:41 PM
To: basicstamps Moderator
Subject: Controller/ HMI software for the Basic Stamp
HMI:
We are about to launch our HMI package that has been adapted to communicate
directly with the Basic Stamp chip. This HMI package is a full graphical
interface that is being used in industrial applications in the US and Canada
from small 1 screen, 20 tag apps. to apps. with over 50 screens and over a
thousand tags.
Controllers:
Our "EnT" controllers are also being used in many industrial applications as
well as smaller stand-alone applications. At present, they support the BS2,
BSX and BX-24 processors.
Card Size: 6" X 6.5"
Outputs: 8 outputs VIA on board 5 amp relays and/ or 8 on board mosfet
transistors.
Inputs: 8 inputs switch selectable for analog or digital. Analogs are
direct connected while the digitals are optically isolated.
Communications: RS-232/ RS-485
Power supply: 9V to 24V/ AC or DC
Product availability and pricing will be announced when it becomes
available.
There will also be a web site and discussion group dedicated to the
controllers and HMI package.
Comments, Suggestions?
Brad Watts / AMT
E-mail BradWatts@a...
Web www.amt.nb.ca
E-mail BradWatts@a...
Web www.amt.nb.ca
Original Message
From: Brad Watts [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=sOcies1qZ9O-HiLQudA4v3l0u763FvL522P-20nXARCDWRG2Wt_P3cxIn9-Wjg2Yam4z2c9W8M3LBvZ--DHSQQ]BradWatts@b...[/url
Sent: Monday, July 02, 2001 9:41 PM
To: basicstamps Moderator
Subject: Controller/ HMI software for the Basic Stamp
HMI:
We are about to launch our HMI package that has been adapted to communicate
directly with the Basic Stamp chip. This HMI package is a full graphical
interface that is being used in industrial applications in the US and Canada
from small 1 screen, 20 tag apps. to apps. with over 50 screens and over a
thousand tags.
Controllers:
Our "EnT" controllers are also being used in many industrial applications as
well as smaller stand-alone applications. At present, they support the BS2,
BSX and BX-24 processors.
Card Size: 6" X 6.5"
Outputs: 8 outputs VIA on board 5 amp relays and/ or 8 on board mosfet
transistors.
Inputs: 8 inputs switch selectable for analog or digital. Analogs are
direct connected while the digitals are optically isolated.
Communications: RS-232/ RS-485
Power supply: 9V to 24V/ AC or DC
Product availability and pricing will be announced when it becomes
available.
There will also be a web site and discussion group dedicated to the
controllers and HMI package.
Comments, Suggestions?
Brad Watts / AMT
E-mail BradWatts@a...
Web www.amt.nb.ca