BS2p port 16 SERIN question
In a regular BS2, the following instruction works fine to read data from my
PC:
" SERIN 16, 16468, 1, upSideDown1, [noparse][[/noparse]queue] "
But the instruction does not with the BS2p.
With respect to port 16, has anything changed in the 2p? (e.g., the
baudrate?). It may just be a timing problem...
Jay
PC:
" SERIN 16, 16468, 1, upSideDown1, [noparse][[/noparse]queue] "
But the instruction does not with the BS2p.
With respect to port 16, has anything changed in the 2p? (e.g., the
baudrate?). It may just be a timing problem...
Jay
Comments
>PC:
>
>" SERIN 16, 16468, 1, upSideDown1, [noparse][[/noparse]queue] "
>
>But the instruction does not with the BS2p.
use baudmode=$40f0 (16624 decimal)
instead of $4054 (16468 decimal)
The baud modes for the BS2sx and the BS2p are different from the BS2
and BS2e. There is a baudmode table in the v2.0 manual, and also one
at
http://www.emesys.com/BS2rs232.htm
and also one in the Al Williams FAQ at
http://www.al-williams.com/wd5gnr/stampfaq.htm#s3.18
(p.s. Al, some the targets in the FAQ, like #s3.18 seem to be broken)
regards,
-- Tracy
of a pc? What would be the protocol for sending data
that the PC thinks is a standard PC keyboard? Could
this also be configured so that a keyboard and or the
stamp could talk to the PC? I am new to the discussion
list and am not sure that I am following the right
path to my answer. Any help would be greatly
appreciated!!!
Thanks, Scott Sutton
--- Tracy Allen <tracy@e...> wrote:
> >In a regular BS2, the following instruction works
> fine to read data from my
> >PC:
> >
> >" SERIN 16, 16468, 1, upSideDown1, [noparse][[/noparse]queue] "
> >
> >But the instruction does not with the BS2p.
>
> use baudmode=$40f0 (16624 decimal)
> instead of $4054 (16468 decimal)
>
> The baud modes for the BS2sx and the BS2p are
> different from the BS2
> and BS2e. There is a baudmode table in the v2.0
> manual, and also one
> at
> http://www.emesys.com/BS2rs232.htm
> and also one in the Al Williams FAQ at
>
> http://www.al-williams.com/wd5gnr/stampfaq.htm#s3.18
>
> (p.s. Al, some the targets in the FAQ, like #s3.18
> seem to be broken)
>
> regards,
> -- Tracy
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed
> with. Text in the Subject and Body of the message
> will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/