another stamp 2/sx/e/p expansion board
Hi Stampers,
For all of you that are interested in yet another expansion
board for the Basic Stsmp 2/SX/E/P, please visit
http://www.boselectro.nl
Click the link 'elektronische besturingen'
Sorry, the site is in dutch only.
The expansion board info is in english though.
Use 'Save target as' on the link 'Synop rev.C expansion board'
to download the pdf file.
Main features of the board:
- designed for Parallax Basic Stamp 2/SX/E/P microcontroller
- 80 digital inputs/outputs or open collector outputs
- 4 serial communication RX/TX channels (3x RS232 and 1x RS485)
- onboard buzzer with enable/disable and switch output connector
- microcontroller watchdog with enable/disable
- operates on 12/24V @ 500mA max.
- onboard regulators for 12V and 5V
- power output connectors for 24V, 12V and 5V
- I2C bus using Stamp ports P8 and P9, with expansion connector
- one free 8 pin DIP IC socket for I2C device: clock, RAM, EEPROM
- Stamp ports P0-P7 free for user applications
- I2C software for digital I/O, clock, RAM, EEPROM
- master/slave RS485 network software
- all IC's socketed for easy replacement
If you are interseted in this board send an email to info@b...
We will await the responses for the next 3-4 weeks
after which we will decide wether or not to make this board
available via a distributor.
Distributors are welcome to respond!
Hope to hear from you.
Sincerely yours,
Peter Verkaik
Bos Automatisering BV
The Netherlands
FREE! The World's Best Email Address @email.com
Reserve your name now at http://www.email.com
For all of you that are interested in yet another expansion
board for the Basic Stsmp 2/SX/E/P, please visit
http://www.boselectro.nl
Click the link 'elektronische besturingen'
Sorry, the site is in dutch only.
The expansion board info is in english though.
Use 'Save target as' on the link 'Synop rev.C expansion board'
to download the pdf file.
Main features of the board:
- designed for Parallax Basic Stamp 2/SX/E/P microcontroller
- 80 digital inputs/outputs or open collector outputs
- 4 serial communication RX/TX channels (3x RS232 and 1x RS485)
- onboard buzzer with enable/disable and switch output connector
- microcontroller watchdog with enable/disable
- operates on 12/24V @ 500mA max.
- onboard regulators for 12V and 5V
- power output connectors for 24V, 12V and 5V
- I2C bus using Stamp ports P8 and P9, with expansion connector
- one free 8 pin DIP IC socket for I2C device: clock, RAM, EEPROM
- Stamp ports P0-P7 free for user applications
- I2C software for digital I/O, clock, RAM, EEPROM
- master/slave RS485 network software
- all IC's socketed for easy replacement
If you are interseted in this board send an email to info@b...
We will await the responses for the next 3-4 weeks
after which we will decide wether or not to make this board
available via a distributor.
Distributors are welcome to respond!
Hope to hear from you.
Sincerely yours,
Peter Verkaik
Bos Automatisering BV
The Netherlands
FREE! The World's Best Email Address @email.com
Reserve your name now at http://www.email.com
Comments
Went to the site and selected the "SYNOP rev.C expansion board". This
points to a broken link.
Phil
peter verkaik wrote:
>
> Hi Stampers,
>
> For all of you that are interested in yet another expansion
> board for the Basic Stsmp 2/SX/E/P, please visit
> http://www.boselectro.nl
> Click the link 'elektronische besturingen'
> Sorry, the site is in dutch only.
> The expansion board info is in english though.
> Use 'Save target as' on the link 'Synop rev.C expansion board'
> to download the pdf file.
>
> Main features of the board:
> - designed for Parallax Basic Stamp 2/SX/E/P microcontroller
> - 80 digital inputs/outputs or open collector outputs
> - 4 serial communication RX/TX channels (3x RS232 and 1x RS485)
> - onboard buzzer with enable/disable and switch output connector
> - microcontroller watchdog with enable/disable
> - operates on 12/24V @ 500mA max.
> - onboard regulators for 12V and 5V
> - power output connectors for 24V, 12V and 5V
> - I2C bus using Stamp ports P8 and P9, with expansion connector
> - one free 8 pin DIP IC socket for I2C device: clock, RAM, EEPROM
> - Stamp ports P0-P7 free for user applications
> - I2C software for digital I/O, clock, RAM, EEPROM
> - master/slave RS485 network software
> - all IC's socketed for easy replacement
>
> If you are interseted in this board send an email to info@b...
> We will await the responses for the next 3-4 weeks
> after which we will decide wether or not to make this board
> available via a distributor.
> Distributors are welcome to respond!
> Hope to hear from you.
>
> Sincerely yours,
> Peter Verkaik
> Bos Automatisering BV
> The Netherlands
>
>
> FREE! The World's Best Email Address @email.com
> Reserve your name now at http://www.email.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
At 10:54 AM 4/9/2001 -0400, you wrote:
>Hi Stampers,
>
>For all of you that are interested in yet another expansion
>board for the Basic Stsmp 2/SX/E/P, please visit
>http://www.boselectro.nl
_________________________________
Mike Walsh
walsh@i...
The BS2sx chip plugs into a socket on the board, and is powered with a
12-volt gel-cell. I used the same voltage regulator as the super carrier
board and has nice polarized plug-ins for all of the sensors, etc...
Original Message
> >For all of you that are interested in yet another expansion
> >board for the Basic Stsmp 2/SX/E/P, please visit
> >http://www.boselectro.nl
I already received a few responses regarding our SYNOP expansion board.
For those interested, I've put an application note on our website
http://www.boselectro.nl (click the link 'elektronische besturingen')
that descripes the major application the board was created for:
a pager and led panel interface for fire alarm systems.
Currently I am working on the second major application for this board:
a timescheduled door monitor system with pager and led panel interface.
Some of the responses asked about the prices for this board.
This information is not available yet, as the price greatly depends on
the number of boards manufactured. This is why I posted the message.
To find out how many boards we must manufacture, using the number
of responses as a guideline. As soon as this information is available,
I will post a message on the stamp list.
For now, keep those responses getting in.
Greetings,
Peter Verkaik
Bos Automatiisering BV
The Netherlands
This is the second post for our stamp expansion board.
Thanks to those responded already. For others that missed
the first post but are interested, please visit our website
http://www.boselectro.nl
Click the link 'elektronische besturingen'
There has been an update on the documentation
that shows the versatility of this board.
Prices for the board are expected in the next week.
Please send any comments and remarks to
peterverkaik@b...
subject SYNOP
Greetings,
Peter Verkaik
Bos Automatisering & Elektrotechniek BV
The Netherlands
For all of you that responded some weeks ago to our
stamp expansion board, here are our reseller prices.
(based on quantity of 50).
Empty pcb US$ 21 just the pcb, you must do your own soldering
Socket board US$ 105 all components plus sockets for the chips
Full board US$ 191 all components and sockets plus chips
Shipping US$ 30 approx. per order
(all boards exclusive stamp controller)
Info about the board:
description: http://www.boselectro.nl/synopc%20flyer.pdf
I/O section configuration:
http://www.boselectro.nl/Synopc%20IO%20configuration.pdf
real life application:
http://www.boselectro.nl/Application%20note%201.pdf
Contact me offlist at peterverkaik@b... if
you are willing to place an order.
Subject synop, please specify empty, socket or full.
I am in contact with a distributor in the US to provide for lower quantity
orders,
but we need at least 50 to get those boards manufactured.
Greetings,
Peter Verkaik
Bos Automatisering & Elektrotechniek BV
The Netherlands