bs2 detected(D.Boulter)
Archiver
Posts: 46,084
This is an old message, but I am interested: how did you fix it...i
have the same problem!
Thanks,
Corey C.
--- In basicstamps@y..., "D.Boulter" <davboul@e...> wrote:
> Hi All:
> I just tried to load a program into my BS2 and I keep getting
a "Basic stamp detected but not responding on com 1,check power
supply".I replaced battery with a good one,checked serial cable and
found it to be good but I still get the error.Can anyone help me with
this problem? Thanks,Dave.
have the same problem!
Thanks,
Corey C.
--- In basicstamps@y..., "D.Boulter" <davboul@e...> wrote:
> Hi All:
> I just tried to load a program into my BS2 and I keep getting
a "Basic stamp detected but not responding on com 1,check power
supply".I replaced battery with a good one,checked serial cable and
found it to be good but I still get the error.Can anyone help me with
this problem? Thanks,Dave.
Comments
extensive troubleshooting, I ended up sending my Stamp back and getting a
replacement. Then it worked. [noparse]:)[/noparse]
Eric
Original Message
From: the_coin_guy@y... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=0OXwd12Ll10U_MNO1xlFIB7FJQjIUNg4seC3_cq0r9JToKnuG0uk5QsMINCF9-1u4Jicrp82Mpcz0YHmxOMMYA]the_coin_guy@y...[/url
Sent: Sunday, April 01, 2001 7:49 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] Re: bs2 detected(D.Boulter)
This is an old message, but I am interested: how did you fix it...i
have the same problem!
Thanks,
Corey C.
--- In basicstamps@y..., "D.Boulter" <davboul@e...> wrote:
> Hi All:
> I just tried to load a program into my BS2 and I keep getting
a "Basic stamp detected but not responding on com 1,check power
supply".I replaced battery with a good one,checked serial cable and
found it to be good but I still get the error.Can anyone help me with
this problem? Thanks,Dave.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
[noparse];)[/noparse]
Eric
Original Message
From: Eric Schettler [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=8QVysB2yXpjwve7gwIZMjhI9pfh_6Czi_9b0ISn2AOZe8Tg_OSKMqozMiSJXe00pmPejycuh3fbyUHicxpU]schettlee@p...[/url
Sent: Sunday, April 01, 2001 8:19 PM
To: basicstamps@yahoogroups.com
Subject: RE: [noparse][[/noparse]basicstamps] Re: bs2 detected(D.Boulter)
I had this problem, and contacted Parallel's tech support. After some
extensive troubleshooting, I ended up sending my Stamp back and getting a
replacement. Then it worked. [noparse]:)[/noparse]
Eric
Original Message
From: the_coin_guy@y... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=yMlDlClCcvDgcYVQQ66Js4yov5bI2oDfF7UhgBIaqMCK0_OIfCaVjXABmVLble4QFq87r88dwz7_D-VUVWhOPw]the_coin_guy@y...[/url
Sent: Sunday, April 01, 2001 7:49 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] Re: bs2 detected(D.Boulter)
This is an old message, but I am interested: how did you fix it...i
have the same problem!
Thanks,
Corey C.
--- In basicstamps@y..., "D.Boulter" <davboul@e...> wrote:
> Hi All:
> I just tried to load a program into my BS2 and I keep getting
a "Basic stamp detected but not responding on com 1,check power
supply".I replaced battery with a good one,checked serial cable and
found it to be good but I still get the error.Can anyone help me with
this problem? Thanks,Dave.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/