area code phone dialer
Archiver
Posts: 46,084
Graham-
See page 109 of BASIC Stamp Programming Manual 2.0 for a circuit that
works. That and a DTMFOUT instruction will get you there.
Regards,
Steve
On 23 Mar 01 at 14:26, dynamictech@v... wrote:
> ...Does anyone have any ideas on a simple stamp circuit that would
> always dial a preprogramed 3 digit area code
See page 109 of BASIC Stamp Programming Manual 2.0 for a circuit that
works. That and a DTMFOUT instruction will get you there.
Regards,
Steve
On 23 Mar 01 at 14:26, dynamictech@v... wrote:
> ...Does anyone have any ideas on a simple stamp circuit that would
> always dial a preprogramed 3 digit area code
Comments
calls. The requirement to dial a 3 digit area code goes against a
long term habit. Does anyone have any ideas on a simple stamp
circuit
that would always dial a preprogramed 3 digit area code (unless
disabled for long distance).
-Graham
dynamictech@vnet.net writes:
calls. ·The requirement to dial a 3 digit area code goes against a
long term habit. ·Does anyone have any ideas on a simple stamp
circuit
that would always dial a preprogramed 3 digit area code (unless
disabled for long distance).
Dialing the phone number is easy with the BS2. ·You could certainly build a
circuit that dials the your area code when you press a button. ·Of course,
you could press two more buttons -- the ones on your phone -- to dial the
local area code and use your Stamp for something else.
We switched to 10 digits in Dallas a couple of years ago. ·It didn't take
long to get used to it.[/font]
In the words of a guy I knew who worked across the street from the sewage
treatment plant, "It's not so bad, once you get used to it."
--Stu
Original Message
From: <dynamictech@v...>
To: <basicstamps@yahoogroups.com>
Sent: Friday, March 23, 2001 9:26 AM
Subject: [noparse][[/noparse]basicstamps] area code phone dialer
> My phone company recently switched to 10 digit dialing for local
> calls. The requirement to dial a 3 digit area code goes against a
> long term habit. Does anyone have any ideas on a simple stamp
> circuit
> that would always dial a preprogramed 3 digit area code (unless
> disabled for long distance).
>
> -Graham
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
On Fri, 23 Mar 2001 jonwms@a... wrote:
> In a message dated 3/23/01 8:28:12 AM Central Standard Time,
> dynamictech@v... writes:
>
>
> > My phone company recently switched to 10 digit dialing for local
> > calls. The requirement to dial a 3 digit area code goes against a
> > long term habit. Does anyone have any ideas on a simple stamp
> > circuit
> > that would always dial a preprogramed 3 digit area code (unless
> >
>
> Dialing the phone number is easy with the BS2. You could certainly build a
> circuit that dials the your area code when you press a button. Of course,
> you could press two more buttons -- the ones on your phone -- to dial the
> local area code and use your Stamp for something else.
>
> We switched to 10 digits in Dallas a couple of years ago. It didn't take
> long to get used to it.
>
Sean T. Lamont, CTO / Chief NetNerd, Abstract Software, Inc. (ServNet)
Seattle - Bellingham - Vancouver - Portland - Everett - Tacoma - Bremerton
email: lamont@a... WWW: http://www.serv.net
"...There's no moral, it's just a lot of stuff that happens". - H. Simpson
apply to devices being sold?
---
Don Russell
Original Message
From: "S Parkis" <parkiss@e...>
To: <dynamictech@v...>; <basicstamps@yahoogroups.com>
Sent: Thursday, March 22, 2001 7:21 PM
Subject: Re: [noparse][[/noparse]basicstamps] area code phone dialer
> Graham-
>
> See page 109 of BASIC Stamp Programming Manual 2.0 for a circuit that
> works. That and a DTMFOUT instruction will get you there.
>
>
> Regards,
>
> Steve
>
> On 23 Mar 01 at 14:26, dynamictech@v... wrote:
>
> > ...Does anyone have any ideas on a simple stamp circuit that would
> > always dial a preprogramed 3 digit area code
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
drussel2@san.rr.com writes:
apply to devices being sold?
[/font]
:-)
---
Don Russell
---
Original Message
From: jonwms@aol.com
To: basicstamps@yahoogroups.com
Sent: Saturday, March 24, 2001 7:12 AM
Subject: Re: [noparse][[/noparse]basicstamps] area code phone dialer
[font=arial,helvetica]In a message dated 3/23/01 9:56:50 PM Central Standard Time,
drussel2@san.rr.com writes:
apply to devices being sold?
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[/font]
drussel2@san.rr.com writes:
:-)
Oops...error on my part. [/font]
Do you have a comment regarding the requirement to be FCC 68 compliant?
Thanks :-)
---
Don Russell
---
Original Message
From: jonwms@aol.com
To: basicstamps@yahoogroups.com
Sent: Saturday, March 24, 2001 10:38 AM
Subject: Re: [noparse][[/noparse]basicstamps] area code phone dialer
[font=arial,helvetica]In a message dated 3/24/01 12:15:25 PM Central Standard Time,
drussel2@san.rr.com writes:
:-)
Oops...error on my part.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[/font]