Attn: Al Williams - FW: [basicstamps] Boebot Project
Al,
Could you please open up a Boe-Bot or direct me to the most appropriate
location to post? Please see below.
Andy
Original Message
From: Andy Lindsay [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=Tl2Rz5GSJHkTQpQCINy4hT_Wq1MCW3ab0sMQeEh1mlVFhKHliotiidlsIMJHCVxUZQf4IZvNWLlvs8K4U1OMhLHW]alindsay@p...[/url
Sent: Monday, March 12, 2001 9:11 AM
To: basicstamps@yahoogroups.com
Subject: RE: [noparse][[/noparse]basicstamps] Boebot Project
Hello Everybody,
Al Williams is offering us a really cool resource by making
http://wd5gnr.virtualave.net/wiki
available as a repository for Stamp related files (Schematics, code, pics,
etc). I've used his this site extensively on other projects, and it's an
EXCELLENT virtual workspace for both "tire kicking" and higher level design.
As a test, I'll post some BS2 code for driving a Boe-Bot using a universal
remote (configured to work as a Sony(tm) TV remote). The code works with
the schematic in Robotics! v1.4, Chapter5, Activity #1 (available from the
www.stampsinclass.com Downloads page).
Then, I'll send an announcement to the group that the code has been posted.
We can try it out and see if it works, and/or open a thread for suggested
changes/improvements to the forum.
Andy
Andrew Lindsay, Applications Engineer
Parallax, Inc. Technical Support
E-Mail...........alindsay@p...
Parallax, Inc. home page....................www.parallaxinc.com
BASIC Stamp Educational Resources...........www.stampsinclass.com
SX Microcontroller University Resources.....www.sxtech.com
Original Message
From: Rodent [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=uGB4Xsye5zcvISc3PrEFwkfyLWn3zAr2IrIVIUg43bvuRWjwFR7pXoMTFGMvBe3u-U7vDl2pxzcatA]daweasel@s...[/url
Sent: Monday, March 12, 2001 6:33 AM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] Boebot Project
What I was talking about was a public, non-commercial place to post photos
and descriptions. Nothing really technical, just a place for some virtual
tire kicking.
Original Message
> There is a web page where you can post your bot creations. Find it at
> www.robotics.com/robomenu/
>
> I really like the robot lawn mower.
> > Good point. Other than the Yahoo file area, which is hard to use, does
> > anyone have web space allocated for the group? I'd be willing to chip in
> > some time setting up some basic pages.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Could you please open up a Boe-Bot or direct me to the most appropriate
location to post? Please see below.
Andy
Original Message
From: Andy Lindsay [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=Tl2Rz5GSJHkTQpQCINy4hT_Wq1MCW3ab0sMQeEh1mlVFhKHliotiidlsIMJHCVxUZQf4IZvNWLlvs8K4U1OMhLHW]alindsay@p...[/url
Sent: Monday, March 12, 2001 9:11 AM
To: basicstamps@yahoogroups.com
Subject: RE: [noparse][[/noparse]basicstamps] Boebot Project
Hello Everybody,
Al Williams is offering us a really cool resource by making
http://wd5gnr.virtualave.net/wiki
available as a repository for Stamp related files (Schematics, code, pics,
etc). I've used his this site extensively on other projects, and it's an
EXCELLENT virtual workspace for both "tire kicking" and higher level design.
As a test, I'll post some BS2 code for driving a Boe-Bot using a universal
remote (configured to work as a Sony(tm) TV remote). The code works with
the schematic in Robotics! v1.4, Chapter5, Activity #1 (available from the
www.stampsinclass.com Downloads page).
Then, I'll send an announcement to the group that the code has been posted.
We can try it out and see if it works, and/or open a thread for suggested
changes/improvements to the forum.
Andy
Andrew Lindsay, Applications Engineer
Parallax, Inc. Technical Support
E-Mail...........alindsay@p...
Parallax, Inc. home page....................www.parallaxinc.com
BASIC Stamp Educational Resources...........www.stampsinclass.com
SX Microcontroller University Resources.....www.sxtech.com
Original Message
From: Rodent [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=uGB4Xsye5zcvISc3PrEFwkfyLWn3zAr2IrIVIUg43bvuRWjwFR7pXoMTFGMvBe3u-U7vDl2pxzcatA]daweasel@s...[/url
Sent: Monday, March 12, 2001 6:33 AM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] Boebot Project
What I was talking about was a public, non-commercial place to post photos
and descriptions. Nothing really technical, just a place for some virtual
tire kicking.
Original Message
> There is a web page where you can post your bot creations. Find it at
> www.robotics.com/robomenu/
>
> I really like the robot lawn mower.
> > Good point. Other than the Yahoo file area, which is hard to use, does
> > anyone have web space allocated for the group? I'd be willing to chip in
> > some time setting up some basic pages.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Comments
Original Message
From: Andy Lindsay [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=z85DIFbJKGH1rLrrLzpKMIE9i_T4QsF315XkF9CW_0lMBIQm7QsgK-AE9dD1Hc_bHK1jYDlpj7w2K5IFRkG0M6s]alindsay@p...[/url
Sent: Monday, March 12, 2001 9:17 AM
To: basicstamps@yahoogroups.com
Subject: Attn: Al Williams - FW: [noparse][[/noparse]basicstamps] Boebot Project
Al,
Could you please open up a Boe-Bot or direct me to the most appropriate
location to post? Please see below.
Andy
Original Message
From: Andy Lindsay [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=z85DIFbJKGH1rLrrLzpKMIE9i_T4QsF315XkF9CW_0lMBIQm7QsgK-AE9dD1Hc_bHK1jYDlpj7w2K5IFRkG0M6s]alindsay@p...[/url
Sent: Monday, March 12, 2001 9:11 AM
To: basicstamps@yahoogroups.com
Subject: RE: [noparse][[/noparse]basicstamps] Boebot Project
Hello Everybody,
Al Williams is offering us a really cool resource by making
http://wd5gnr.virtualave.net/wiki
available as a repository for Stamp related files (Schematics, code, pics,
etc). I've used his this site extensively on other projects, and it's an
EXCELLENT virtual workspace for both "tire kicking" and higher level design.
As a test, I'll post some BS2 code for driving a Boe-Bot using a universal
remote (configured to work as a Sony(tm) TV remote). The code works with
the schematic in Robotics! v1.4, Chapter5, Activity #1 (available from the
www.stampsinclass.com Downloads page).
Then, I'll send an announcement to the group that the code has been posted.
We can try it out and see if it works, and/or open a thread for suggested
changes/improvements to the forum.
Andy
Andrew Lindsay, Applications Engineer
Parallax, Inc. Technical Support
E-Mail...........alindsay@p...
Parallax, Inc. home page....................www.parallaxinc.com
BASIC Stamp Educational Resources...........www.stampsinclass.com
SX Microcontroller University Resources.....www.sxtech.com
Original Message
From: Rodent [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=s-r-dqXwYEDdPlbfIiILijILgv4xCYy-lzu7K3nARsSGlYQ3EP0JvyHas9C4o4MWcPq-eSGyz3Xgnw]daweasel@s...[/url
Sent: Monday, March 12, 2001 6:33 AM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] Boebot Project
What I was talking about was a public, non-commercial place to post photos
and descriptions. Nothing really technical, just a place for some virtual
tire kicking.
Original Message
> There is a web page where you can post your bot creations. Find it at
> www.robotics.com/robomenu/
>
> I really like the robot lawn mower.
> > Good point. Other than the Yahoo file area, which is hard to use, does
> > anyone have web space allocated for the group? I'd be willing to chip in
> > some time setting up some basic pages.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/