Shop OBEX P1 Docs P2 Docs Learn Events
BS2p with board of education — Parallax Forums

BS2p with board of education

ArchiverArchiver Posts: 46,084
edited 2001-03-06 18:29 in General Discussion
I just got the new BS2p 24 pin Stamp and wrote a code to read a 1-Wire
bus id. However when I placed the BS2p into the Board of Education
programmer, it said "error Hardware not found". The Board of Education
programmer seems to work just fine with my BS2 stamp, but keeps giving
me that error message for my BS2p stamp. What could be the problem? Is
the Board of Education programmer not meant to work with the BS2p? I
need help!

Sincerely,

Jelani Givner

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2001-03-05 22:45
    Silly question, but are you using older BS2 software? You need a version of
    the Stamp editor that supports the BS2P.

    Regards,

    Al Williams
    AWC
    * 8 channels of PWM: http://www.al-williams.com/awce/pak5.htm

    >
    Original Message
    > From: jelani Givner [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=i30fdcMZ3x2tQIJoddWs2ZHmyM36X1PGAwsYX0BCgos8FMINFbBAylVhN7UrDRnJuMhMWCl73aPqYAgk]givner@s...[/url
    > Sent: Monday, March 05, 2001 4:32 PM
    > To: basicstamps@yahoogroups.com
    > Subject: [noparse][[/noparse]basicstamps] BS2p with board of education
    >
    >
    > I just got the new BS2p 24 pin Stamp and wrote a code to read a 1-Wire
    > bus id. However when I placed the BS2p into the Board of Education
    > programmer, it said "error Hardware not found". The Board of Education
    > programmer seems to work just fine with my BS2 stamp, but keeps giving
    > me that error message for my BS2p stamp. What could be the problem? Is
    > the Board of Education programmer not meant to work with the BS2p? I
    > need help!
    >
    > Sincerely,
    >
    > Jelani Givner
    >
    >
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
  • ArchiverArchiver Posts: 46,084
    edited 2001-03-05 22:54
    Yeah, I'm using the Stamp2p.exe dos file (which came on a disk with the BS2p
    stamp) to compile my BS2p program. I actually took an old BS2 program and
    changed the suffix to .b2p. After that the program was visible and loadable to
    the BS2p programmer. Yet when I try to compile my program, I still get the
    "error hardware not found" message.

    Al Williams wrote:

    > Silly question, but are you using older BS2 software? You need a version of
    > the Stamp editor that supports the BS2P.
    >
    > Regards,
    >
    > Al Williams
    > AWC
    > * 8 channels of PWM: http://www.al-williams.com/awce/pak5.htm
    >
    > >
    Original Message
    > > From: jelani Givner [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=3MwtnmlxV30kGl_ratfXoMBFtDoMfF4sAEcRYR_vyH4CvTa7_W98CgKG0fzBhNRqCU7UpGYNqBmH5A]givner@s...[/url
    > > Sent: Monday, March 05, 2001 4:32 PM
    > > To: basicstamps@yahoogroups.com
    > > Subject: [noparse][[/noparse]basicstamps] BS2p with board of education
    > >
    > >
    > > I just got the new BS2p 24 pin Stamp and wrote a code to read a 1-Wire
    > > bus id. However when I placed the BS2p into the Board of Education
    > > programmer, it said "error Hardware not found". The Board of Education
    > > programmer seems to work just fine with my BS2 stamp, but keeps giving
    > > me that error message for my BS2p stamp. What could be the problem? Is
    > > the Board of Education programmer not meant to work with the BS2p? I
    > > need help!
    > >
    > > Sincerely,
    > >
    > > Jelani Givner
    > >
    > >
    > >
    > >
    > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    > >
    >
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
  • ArchiverArchiver Posts: 46,084
    edited 2001-03-05 23:06
    "NO" This is not a silly question...
    It is nice that you respond but. I feel when you say silly it is an insult
    to whom wrote the qustion.

    On Mon, 5 Mar 2001, Al Williams wrote:

    > Silly question, but are you using older BS2 software? You need a version of
    > the Stamp editor that supports the BS2P.
    >
    > Regards,
    >
    > Al Williams
    > AWC
    > * 8 channels of PWM: http://www.al-williams.com/awce/pak5.htm
    >
    > >
    Original Message
    > > From: jelani Givner [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=Syp22SuPQtIfuLkOenwSFhmglHoIfGjFMOeG5AhsZCJ5rOtFKJ442JvTthvrpgOZ78d26tadF9cZ]givner@s...[/url
    > > Sent: Monday, March 05, 2001 4:32 PM
    > > To: basicstamps@yahoogroups.com
    > > Subject: [noparse][[/noparse]basicstamps] BS2p with board of education
    > >
    > >
    > > I just got the new BS2p 24 pin Stamp and wrote a code to read a 1-Wire
    > > bus id. However when I placed the BS2p into the Board of Education
    > > programmer, it said "error Hardware not found". The Board of Education
    > > programmer seems to work just fine with my BS2 stamp, but keeps giving
    > > me that error message for my BS2p stamp. What could be the problem? Is
    > > the Board of Education programmer not meant to work with the BS2p? I
    > > need help!
    > >
    > > Sincerely,
    > >
    > > Jelani Givner
    > >
    > >
    > >
    > >
    > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    > >
    >
    >
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2001-03-05 23:12
    While I believe that Al is perfectly able to defend himself,
    might I comment that it's your misunderstanding of the English
    language that is the problem here.

    Al was merely saying "I realize that you have probably already
    thought of this, but....." It was not intended as an insult at all.

    Al Williams is probably the most helpful individual on this
    list, and one of the most knowledgeable. Please be nice to the
    gurus - they are the ones that help out us all.

    JP Harrison
    Original Message
    From: SAN CHRISTOPHER POISSON [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=VU-KkLCLM81sGsnzFz9UK6sO1S5Df1EdDvlO2UcqjmfroAg0HKb_fts1aeXrBx3EfmwSI0zk]sp71@s...[/url
    Sent: Monday, March 05, 2001 3:07 PM
    To: basicstamps@yahoogroups.com
    Subject: RE: [noparse][[/noparse]basicstamps] BS2p with board of education


    "NO" This is not a silly question...
    It is nice that you respond but. I feel when you say silly it is an insult
    to whom wrote the qustion.

    On Mon, 5 Mar 2001, Al Williams wrote:

    > Silly question, but are you using older BS2 software? You need a version
    of
    > the Stamp editor that supports the BS2P.
    >
    > Regards,
    >
  • ArchiverArchiver Posts: 46,084
    edited 2001-03-05 23:31
    ...or maybe he needs to change the header in the program to reflect a BS2p?
    Original Message

    > Silly question, but are you using older BS2 software? You need a version
    of
    > the Stamp editor that supports the BS2P.

    > > I just got the new BS2p 24 pin Stamp and wrote a code to read a 1-Wire
    > > bus id. However when I placed the BS2p into the Board of Education
    > > programmer, it said "error Hardware not found". The Board of Education
    > > programmer seems to work just fine with my BS2 stamp, but keeps giving
    > > me that error message for my BS2p stamp. What could be the problem? Is
    > > the Board of Education programmer not meant to work with the BS2p?
  • ArchiverArchiver Posts: 46,084
    edited 2001-03-05 23:32
    No, no, no... I meant, "I have a silly question..." I hate to ask an obvious
    question like that, so I prefaced it with "Silly question...." which is
    idiomatic English. Kind of like when someone says, "This really isn't my
    business, but..." that means they are about to poke their nose into your
    business :-) When I say, Silly question, it means "I'm sure you've already
    thought about this, but I'm going to ask it anyway."

    Please, don't take offense! Just a misunderstanding of words (and me a
    supposed word smith).

    Sorry for the misunderstanding.

    Al Williams
    AWC


    >
    Original Message
    > From: SAN CHRISTOPHER POISSON [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=tfSb_gYXUs-DQcWHF4DueoQShoF_grXpZoq1Q8YGmFHdj1MjXqpwjfPL062IrA3Bcxt-uvEzbqE]sp71@s...[/url
    > Sent: Monday, March 05, 2001 5:07 PM
    > To: basicstamps@yahoogroups.com
    > Subject: RE: [noparse][[/noparse]basicstamps] BS2p with board of education
    >
    >
    > "NO" This is not a silly question...
    > It is nice that you respond but. I feel when you say silly it is an insult
    > to whom wrote the qustion.
    >
    > On Mon, 5 Mar 2001, Al Williams wrote:
    >
    > > Silly question, but are you using older BS2 software? You need
    > a version of
    > > the Stamp editor that supports the BS2P.
    > >
    > > Regards,
    > >
    > > Al Williams
    > > AWC
    > > * 8 channels of PWM: http://www.al-williams.com/awce/pak5.htm
    > >
    > > >
    Original Message
    > > > From: jelani Givner [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=pBo4MpGSUKJzJlkOxJfS69KdBEjmvwnf83rwoMitAWIwSPGH0vQov0NI3GHNRhLD7tjunVCdZeyj]givner@s...[/url
    > > > Sent: Monday, March 05, 2001 4:32 PM
    > > > To: basicstamps@yahoogroups.com
    > > > Subject: [noparse][[/noparse]basicstamps] BS2p with board of education
    > > >
    > > >
    > > > I just got the new BS2p 24 pin Stamp and wrote a code to read a 1-Wire
    > > > bus id. However when I placed the BS2p into the Board of Education
    > > > programmer, it said "error Hardware not found". The Board of
    > Education
    > > > programmer seems to work just fine with my BS2 stamp, but keeps giving
    > > > me that error message for my BS2p stamp. What could be the
    > problem? Is
    > > > the Board of Education programmer not meant to work with the BS2p? I
    > > > need help!
    > > >
    > > > Sincerely,
    > > >
    > > > Jelani Givner
    > > >
    > > >
    > > >
    > > >
    > > > Your use of Yahoo! Groups is subject to
    > http://docs.yahoo.com/info/terms/
    > > >
    > >
    > >
    > >
    > >
    > > Your use of Yahoo! Groups is subject to
    > http://docs.yahoo.com/info/terms/
    > >
    > >
    > >
    >
    >
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
  • ArchiverArchiver Posts: 46,084
    edited 2001-03-05 23:40
    Don't you have a political correctness checker on your PC? <grin>
    Original Message

    > No, no, no... I meant, "I have a silly question..." I hate to ask an
    obvious
    > question like that, so I prefaced it with "Silly question...." which is
    > idiomatic English. Kind of like when someone says, "This really isn't my
    > business, but..." that means they are about to poke their nose into your
    > business :-) When I say, Silly question, it means "I'm sure you've already
    > thought about this, but I'm going to ask it anyway."
    >
    > Please, don't take offense! Just a misunderstanding of words (and me a
    > supposed word smith).
    >
    > Sorry for the misunderstanding.
  • ArchiverArchiver Posts: 46,084
    edited 2001-03-06 04:35
    OK no problem I see [noparse]:)[/noparse] Sorry....

    On Mon, 5 Mar 2001, Al Williams wrote:

    > No, no, no... I meant, "I have a silly question..." I hate to ask an obvious
    > question like that, so I prefaced it with "Silly question...." which is
    > idiomatic English. Kind of like when someone says, "This really isn't my
    > business, but..." that means they are about to poke their nose into your
    > business :-) When I say, Silly question, it means "I'm sure you've already
    > thought about this, but I'm going to ask it anyway."
    >
    > Please, don't take offense! Just a misunderstanding of words (and me a
    > supposed word smith).
    >
    > Sorry for the misunderstanding.
    >
    > Al Williams
    > AWC
    >
    >
    > >
    Original Message
    > > From: SAN CHRISTOPHER POISSON [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=wTT_DRPmFLqDgfz1TBbapJYmaglZ92vy3Z24B1uWxANL00bvBk-pWukNhBp9lQnsjGhC_QWTYfQ]sp71@s...[/url
    > > Sent: Monday, March 05, 2001 5:07 PM
    > > To: basicstamps@yahoogroups.com
    > > Subject: RE: [noparse][[/noparse]basicstamps] BS2p with board of education
    > >
    > >
    > > "NO" This is not a silly question...
    > > It is nice that you respond but. I feel when you say silly it is an insult
    > > to whom wrote the qustion.
    > >
    > > On Mon, 5 Mar 2001, Al Williams wrote:
    > >
    > > > Silly question, but are you using older BS2 software? You need
    > > a version of
    > > > the Stamp editor that supports the BS2P.
    > > >
    > > > Regards,
    > > >
    > > > Al Williams
    > > > AWC
    > > > * 8 channels of PWM: http://www.al-williams.com/awce/pak5.htm
    > > >
    > > > >
    Original Message
    > > > > From: jelani Givner [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=haiYiriCAtUzBXmQOw5WHPSGrVs-Lt8-vszQDgp6Da3-n9a0clzKxAye803mvEHnyZLR_fRTUvwXSWx7T_M]givner@s...[/url
    > > > > Sent: Monday, March 05, 2001 4:32 PM
    > > > > To: basicstamps@yahoogroups.com
    > > > > Subject: [noparse][[/noparse]basicstamps] BS2p with board of education
    > > > >
    > > > >
    > > > > I just got the new BS2p 24 pin Stamp and wrote a code to read a 1-Wire
    > > > > bus id. However when I placed the BS2p into the Board of Education
    > > > > programmer, it said "error Hardware not found". The Board of
    > > Education
    > > > > programmer seems to work just fine with my BS2 stamp, but keeps giving
    > > > > me that error message for my BS2p stamp. What could be the
    > > problem? Is
    > > > > the Board of Education programmer not meant to work with the BS2p? I
    > > > > need help!
    > > > >
    > > > > Sincerely,
    > > > >
    > > > > Jelani Givner
    > > > >
    > > > >
    > > > >
    > > > >
    > > > > Your use of Yahoo! Groups is subject to
    > > http://docs.yahoo.com/info/terms/
    > > > >
    > > >
    > > >
    > > >
    > > >
    > > > Your use of Yahoo! Groups is subject to
    > > http://docs.yahoo.com/info/terms/
    > > >
    > > >
    > > >
    > >
    > >
    > >
    > >
    > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    > >
    >
    >
    >
    >
    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    >
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2001-03-06 18:29
    --- In basicstamps@y..., jelani Givner <givner@s...> wrote:
    > I just got the new BS2p 24 pin Stamp and wrote a code to read a
    1-Wire
    > bus id. However when I placed the BS2p into the Board of Education
    > programmer, it said "error Hardware not found". The Board of
    Education
    > programmer seems to work just fine with my BS2 stamp, but keeps
    giving
    > me that error message for my BS2p stamp. What could be the problem?
    Is
    > the Board of Education programmer not meant to work with the BS2p?
    I
    > need help!
    >
    > Sincerely,
    >
    > Jelani Givner


    im a novice and am in the process of constructing my first BS2sx and
    wanted to know wat the advantages are of the BS2p and if its even
    worth it...also, wat does the 1-Wire bus id actually allow you to do?
    are there schematics and a manual i might be able to get or do u think
    its too difficult to construct with a soldering iron etc.? any
    feedback would be appreciated from anybody? thanx allot...
Sign In or Register to comment.