BS2 Interface w/ Voice Direct 364 from Sens ory
Archiver
Posts: 46,084
Thanks for your help. I downloaded the the files you refered to.
We are new to the stamp arena. We have setup the Voice Direct module in
continously listening mode, and even with people talking over the company
intercom, the microphone picks up on our voice up to about 5 feet away. We
had trained it for a CL word as: "Larry" [noparse][[/noparse] "Go" "Fast" ]. You have to say
words slow so that it will can figure out which entry or subentry you are
speaking. I don't imagine that one could get excited as your robot is
getting ready to fall off the edge of a cliff and you want to say "Robot" [noparse][[/noparse]
"Motors" "Stop" ]. Even so, we want to persue it.
Again, Thank you for your help.
Bryan Smith
>
Original Message
> From: Robert Boulis [noparse]/noparse]SMTP:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=XfXKAmFhXaxuFJ3ljBPN6PmsoKIvRGVKkRtjlh3PDAXnOzqz6mPaJplcVwKX7wzmNgcR8C-0fkLOujnv6A]rboulis@m...[/url
> Sent: Tuesday, February 27, 2001 8:34 AM
> To: basicstamps@yahoogroups.com
> Cc: bsmith@w...
> Subject: [noparse][[/noparse]basicstamps] Re: BS2 Interface w/ Voice Direct 364 from
> Sensory
>
> Don Roy wrote a good article in his Personal Robotics News on interfacing
> the Voice Direct Module with a BS2.
>
> I know I would like to try to add a Voice Direct module to my Hexapod I'm
> building. I'm not sure how feasible that would be. I haven't really looked
> at it in detail but it would be nice to be able to give it voice commands
> to turn left, turn right, speak (play a sound). The first thing that comes
> to my mind as a "show stopper" is the noise my servos will make.
>
> This would probably make it impossible for a walking robot to use a Voice
> Direct module. Any thoughts?
>
> These articles are available for download at:
>
> http://groups.yahoo.com/group/personalrobotics/files/BackIssues/
>
>
> Get your small business started at Lycos Small Business at
> http://www.lycos.com/business/mail.html
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
We are new to the stamp arena. We have setup the Voice Direct module in
continously listening mode, and even with people talking over the company
intercom, the microphone picks up on our voice up to about 5 feet away. We
had trained it for a CL word as: "Larry" [noparse][[/noparse] "Go" "Fast" ]. You have to say
words slow so that it will can figure out which entry or subentry you are
speaking. I don't imagine that one could get excited as your robot is
getting ready to fall off the edge of a cliff and you want to say "Robot" [noparse][[/noparse]
"Motors" "Stop" ]. Even so, we want to persue it.
Again, Thank you for your help.
Bryan Smith
>
Original Message
> From: Robert Boulis [noparse]/noparse]SMTP:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=XfXKAmFhXaxuFJ3ljBPN6PmsoKIvRGVKkRtjlh3PDAXnOzqz6mPaJplcVwKX7wzmNgcR8C-0fkLOujnv6A]rboulis@m...[/url
> Sent: Tuesday, February 27, 2001 8:34 AM
> To: basicstamps@yahoogroups.com
> Cc: bsmith@w...
> Subject: [noparse][[/noparse]basicstamps] Re: BS2 Interface w/ Voice Direct 364 from
> Sensory
>
> Don Roy wrote a good article in his Personal Robotics News on interfacing
> the Voice Direct Module with a BS2.
>
> I know I would like to try to add a Voice Direct module to my Hexapod I'm
> building. I'm not sure how feasible that would be. I haven't really looked
> at it in detail but it would be nice to be able to give it voice commands
> to turn left, turn right, speak (play a sound). The first thing that comes
> to my mind as a "show stopper" is the noise my servos will make.
>
> This would probably make it impossible for a walking robot to use a Voice
> Direct module. Any thoughts?
>
> These articles are available for download at:
>
> http://groups.yahoo.com/group/personalrobotics/files/BackIssues/
>
>
> Get your small business started at Lycos Small Business at
> http://www.lycos.com/business/mail.html
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>