How to make a PCB
Archiver
Posts: 46,084
How to make a PCB for my minature Robot
try Far Circuits
they make small runs at a reasonable price.
http://www.cl.ais.net/farcir/index.htm
Original Message
From: nags
To: 'basicstamps@egroups.com'
Sent: Saturday, September 30, 2000 4:00 PM
Subject: [noparse][[/noparse]basicstamps] How to make a PCB for my minature Robot
Hello,
I'm at a point where I'd like to make PCB for my minature robot. Presently, it has three 1" x 1" Radio Shack general purpose PCBs stacked one above the other using some spacers. I have 30 day trial version of the Protel's s/w. I guess my question is many fold:
······· 1.····· How to tell Protel the dimensions of my board
······· 2.····· After done drawing, how do I go about making the pcb - with steps involved.
I know most of you guys have a lot of experience doing PCB stuff - if you can throw some light and point me to some text (or web site) explaining the process, that'll be really great!!!
Thanks in advance
nagi
try Far Circuits
they make small runs at a reasonable price.
http://www.cl.ais.net/farcir/index.htm
Original Message
From: nags
To: 'basicstamps@egroups.com'
Sent: Saturday, September 30, 2000 4:00 PM
Subject: [noparse][[/noparse]basicstamps] How to make a PCB for my minature Robot
Hello,
I'm at a point where I'd like to make PCB for my minature robot. Presently, it has three 1" x 1" Radio Shack general purpose PCBs stacked one above the other using some spacers. I have 30 day trial version of the Protel's s/w. I guess my question is many fold:
······· 1.····· How to tell Protel the dimensions of my board
······· 2.····· After done drawing, how do I go about making the pcb - with steps involved.
I know most of you guys have a lot of experience doing PCB stuff - if you can throw some light and point me to some text (or web site) explaining the process, that'll be really great!!!
Thanks in advance
nagi
Comments
http://run.to/pcb
On Tue, 3 Oct 2000, Brian McClure wrote:
> How to make a PCB for my minature Robottry Far Circuits
> they make small runs at a reasonable price.
> http://www.cl.ais.net/farcir/index.htm
>
>
>
>
>
Original Message
> From: nags
> To: 'basicstamps@egroups.com'
> Sent: Saturday, September 30, 2000 4:00 PM
> Subject: [noparse][[/noparse]basicstamps] How to make a PCB for my minature Robot
>
>
> Hello,
>
> I'm at a point where I'd like to make PCB for my minature robot. Presently,
it has three 1" x 1" Radio Shack general purpose PCBs stacked one above the
other using some spacers. I have 30 day trial version of the Protel's s/w. I
guess my question is many fold:
>
> 1. How to tell Protel the dimensions of my board
> 2. After done drawing, how do I go about making the pcb - with
steps involved.
>
> I know most of you guys have a lot of experience doing PCB stuff - if you
can throw some light and point me to some text (or web site) explaining the
process, that'll be really great!!!
>
> Thanks in advance
> nagi
>
>
Sean T. Lamont, CTO / Chief NetNerd, Abstract Software, Inc. (ServNet)
Seattle - Bellingham - Vancouver - Portland - Everett - Tacoma - Bremerton
email: lamont@a... WWW: http://www.serv.net
"...There's no moral, it's just a lot of stuff that happens". - H. Simpson