.pdf files at www.stampsinclass.com
Archiver
Posts: 46,084
Is it just me, or is there a problem downloading pdf files from
www.stampsinclass.com. (I have no .pdf problems at other sites using
win95+netscape+adobe.)
Doug.
--- In basicstamps@egroups.com, "Babu, Nagi -*Contractor" <nags@c...>
wrote:
> It is a simple but detailed process. Please go to the stamps in
class site
> at http://www.stampsinclass.com and go to the downloads section and
download
> the What's a Microcontrol PDF document. This document has a section
that
> details how this can be done. Hope this helps.
>
> This is the link to the document:
> http://www.stampsinclass.com/downloads/wam1.pdf
>
>
> nagi
>
>
>
>
>
Original Message
> From: curtiszavodny@h... [noparse][[/noparse]mailto:curtiszavodny@h...]
> Sent: Friday, September 29, 2000 10:02 AM
> To: basicstamps@egroups.com
> Subject: [noparse][[/noparse]basicstamps] modifying servos
>
>
> i need to know how to modify a futaba fp-s48 servo so that it can
> rotate all the way around. can anyone give me some advice or point
> me
> in the right direction??
>
> curtis
www.stampsinclass.com. (I have no .pdf problems at other sites using
win95+netscape+adobe.)
Doug.
--- In basicstamps@egroups.com, "Babu, Nagi -*Contractor" <nags@c...>
wrote:
> It is a simple but detailed process. Please go to the stamps in
class site
> at http://www.stampsinclass.com and go to the downloads section and
download
> the What's a Microcontrol PDF document. This document has a section
that
> details how this can be done. Hope this helps.
>
> This is the link to the document:
> http://www.stampsinclass.com/downloads/wam1.pdf
>
>
> nagi
>
>
>
>
>
Original Message
> From: curtiszavodny@h... [noparse][[/noparse]mailto:curtiszavodny@h...]
> Sent: Friday, September 29, 2000 10:02 AM
> To: basicstamps@egroups.com
> Subject: [noparse][[/noparse]basicstamps] modifying servos
>
>
> i need to know how to modify a futaba fp-s48 servo so that it can
> rotate all the way around. can anyone give me some advice or point
> me
> in the right direction??
>
> curtis
Comments
Try this:
After going to the location where you have the PDF files, right click on the link and select "Save Target As...". This saves it to your machine. See if this is working.
nagi
Original Message
From: fox@doglover.com [noparse]/noparse][url=mailto:fox@doglover.com]mailto:fox@doglover.com[/url
Sent: Friday, September 29, 2000 11:01 AM
To: basicstamps@egroups.com
Subject: [noparse][[/noparse]basicstamps] .pdf files at www.stampsinclass.com
Is it just me, or is there a problem downloading pdf files from
www.stampsinclass.com. (I have no .pdf problems at other sites using
win95+netscape+adobe.)
Doug.
--- In basicstamps@egroups.com, "Babu, Nagi -*Contractor" <nags@c...>
wrote:
> It is a simple but detailed process. Please go to the stamps in
class site
> at http://www.stampsinclass.com and go to the downloads section and
download
> the What's a Microcontrol PDF document. This document has a section
that
> details how this can be done. Hope this helps.
>
> This is the link to the document:
> http://www.stampsinclass.com/downloads/wam1.pdf
>
>
> nagi
>
>
>
>
>
Original Message
> From: curtiszavodny@h... [noparse][[/noparse][url=mailto:curtiszavodny@h]mailto:curtiszavodny@h[/url]...]
> Sent: Friday, September 29, 2000 10:02 AM
> To: basicstamps@egroups.com
> Subject: [noparse][[/noparse]basicstamps] modifying servos
>
>
> i need to know how to modify a futaba fp-s48 servo so that it can
> rotate all the way around.· can anyone give me some advice or point
> me
> in the right direction??
>
> curtis
--- In basicstamps@egroups.com, "Babu, Nagi -*Contractor" <nags@c...>
wrote:
> Try this:
>
> After going to the location where you have the PDF files, right
click on the
> link and select "Save Target As...". This saves it to your machine.
See if
> this is working.
>
> nagi
>
>
Original Message
> From: fox@d... [noparse][[/noparse]mailto:fox@d...]
> Sent: Friday, September 29, 2000 11:01 AM
> To: basicstamps@egroups.com
> Subject: [noparse][[/noparse]basicstamps] .pdf files at www.stampsinclass.com
>
>
> Is it just me, or is there a problem downloading pdf files from
> www.stampsinclass.com. (I have no .pdf problems at other sites
using
> win95+netscape+adobe.)
> Doug.
>
> --- In basicstamps@egroups.com, "Babu, Nagi -*Contractor"
<nags@c...>
> wrote:
> > It is a simple but detailed process. Please go to the stamps in
> class site
> > at http://www.stampsinclass.com and go to the downloads section
and
> download
> > the What's a Microcontrol PDF document. This document has a
section
> that
> > details how this can be done. Hope this helps.
> >
> > This is the link to the document:
> > http://www.stampsinclass.com/downloads/wam1.pdf
> >
> >
> > nagi
> >
> >
> >
> >
> >
Original Message
> > From: curtiszavodny@h... [noparse][[/noparse]mailto:curtiszavodny@h...]
> > Sent: Friday, September 29, 2000 10:02 AM
> > To: basicstamps@egroups.com
> > Subject: [noparse][[/noparse]basicstamps] modifying servos
> >
> >
> > i need to know how to modify a futaba fp-s48 servo so that it can
> > rotate all the way around. can anyone give me some advice or
point
> > me
> > in the right direction??
> >
> > curtis
U R welcome!!!
Original Message
From: fox@doglover.com [noparse]/noparse][url=mailto:fox@doglover.com]mailto:fox@doglover.com[/url
Sent: Friday, September 29, 2000 11:12 AM
To: basicstamps@egroups.com
Subject: [noparse][[/noparse]basicstamps] Re: .pdf files at www.stampsinclass.com
Got it! Thank you Nagi.
--- In basicstamps@egroups.com, "Babu, Nagi -*Contractor" <nags@c...>
wrote:
> Try this:
>
> After going to the location where you have the PDF files, right
click on the
> link and select "Save Target As...". This saves it to your machine.
See if
> this is working.
>
> nagi
>
>
Original Message
> From: fox@d... [noparse][[/noparse][url=mailto:fox@d]mailto:fox@d[/url]...]
> Sent: Friday, September 29, 2000 11:01 AM
> To: basicstamps@egroups.com
> Subject: [noparse][[/noparse]basicstamps] .pdf files at www.stampsinclass.com
>
>
> Is it just me, or is there a problem downloading pdf files from
> www.stampsinclass.com. (I have no .pdf problems at other sites
using
> win95+netscape+adobe.)
> Doug.
>
> --- In basicstamps@egroups.com, "Babu, Nagi -*Contractor"
<nags@c...>
> wrote:
> > It is a simple but detailed process. Please go to the stamps in
> class site
> > at http://www.stampsinclass.com and go to the downloads section
and
> download
> > the What's a Microcontrol PDF document. This document has a
section
> that
> > details how this can be done. Hope this helps.
> >
> > This is the link to the document:
> > http://www.stampsinclass.com/downloads/wam1.pdf
> >
> >
> > nagi
> >
> >
> >
> >
> >
Original Message
> > From: curtiszavodny@h... [noparse][[/noparse][url=mailto:curtiszavodny@h]mailto:curtiszavodny@h[/url]...]
> > Sent: Friday, September 29, 2000 10:02 AM
> > To: basicstamps@egroups.com
> > Subject: [noparse][[/noparse]basicstamps] modifying servos
> >
> >
> > i need to know how to modify a futaba fp-s48 servo so that it can
> > rotate all the way around.· can anyone give me some advice or
point
> > me
> > in the right direction??
> >
> > curtis