BS2SX and the ILM-216 LCD
Archiver
Posts: 46,084
Hello:
I want to know if the 2x16 LCD ILM-216 work with the
Basic Stamp 2SX, I've worked this LCD with the BS2 and
I've not had problems before but now working with the
BS2SX I have,
I've copied the example of the data sheets and doesn't
work.
Thanks.
=====
Alberto Zamora Estrada.
Phone: (506) 220-8279.
Investigaci
I want to know if the 2x16 LCD ILM-216 work with the
Basic Stamp 2SX, I've worked this LCD with the BS2 and
I've not had problems before but now working with the
BS2SX I have,
I've copied the example of the data sheets and doesn't
work.
Thanks.
=====
Alberto Zamora Estrada.
Phone: (506) 220-8279.
Investigaci
Comments
If your program run with BS2 version then it run with BS2SX , but you need
to ajust the timming . (ex: pulsout x 0.8us with sx against 2 us with bs2)
Good luck
John John
Original Message
From: Alberto Zamora <azestrada@y...>
To: <basicstamps@egroups.com>
Sent: Thursday, August 10, 2000 6:34 PM
Subject: [noparse][[/noparse]basicstamps] BS2SX and the ILM-216 LCD
> Hello:
>
> I want to know if the 2x16 LCD ILM-216 work with the
> Basic Stamp 2SX, I've worked this LCD with the BS2 and
> I've not had problems before but now working with the
> BS2SX I have,
>
> I've copied the example of the data sheets and doesn't
> work.
>
> Thanks.
>
>
> =====
> Alberto Zamora Estrada.
> Phone: (506) 220-8279.
> Investigaci
A few weeks ago, I had some trouble with the BS2SX and the BPI-216 LCD (from
Scott Edwards Electronics). It looks very similar to the ILM-216.
The problem is that the BS2SX must be used with other baudmodes :
BS2 BS2SX
2400 bauds $418D $43FD
9600 bauds $4054 $40F0
There is an an addendum to the manual for the BS2SX, with all
explanations,on Parallax's site.
You can find information on www.seetron.com as well.
Hope this can help you.
Best regards,
Philippe Derenne
Original Message
From: Alberto Zamora <azestrada@y...>
To: <basicstamps@egroups.com>
Sent: Thursday, August 10, 2000 6:34 PM
Subject: [noparse][[/noparse]basicstamps] BS2SX and the ILM-216 LCD
> Hello:
>
> I want to know if the 2x16 LCD ILM-216 work with the
> Basic Stamp 2SX, I've worked this LCD with the BS2 and
> I've not had problems before but now working with the
> BS2SX I have,
>
> I've copied the example of the data sheets and doesn't
> work.
>
> Thanks.
>
>
> =====
> Alberto Zamora Estrada.
> Phone: (506) 220-8279.
> Investigaci