Shop OBEX P1 Docs P2 Docs Learn Events
Basic Stamp II OEM Kit — Parallax Forums

Basic Stamp II OEM Kit

ArchiverArchiver Posts: 46,084
edited 2000-07-31 02:35 in General Discussion
I would be interested to know if anyone has had experience with the basic stamp II OEM kit? It has a circuit board with DB9 connector for programming. It is like a stamp II and carrier board combined, without the prototype area. I have included pix. Prices are 1-4 $39 ea. and 5+ for $34 ea. Sure beats $49 for the stamp II and $20 for the carrier board. $69 compared with $39 for one, I ordered some kits. I will advise as to how well all works. I would love to hear some input from anyone who has purchased one and what your results were.

Gary

g.shearer@vanderbilt.edu
Free Electron Laser Research Center
Vanderbilt University
Nashville. TN

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2000-07-30 22:18
    I have purchased an installed one of these in an industrial machine.

    Has worked extremely well in the project.

    I/O was Opto22 Snap Board

    Connections were with connectamundos from Scott Edwards.

    Dan Christadoss
  • ArchiverArchiver Posts: 46,084
    edited 2000-07-31 02:35
    Thanks Dan,
    I am planning to use some of these on my distributed processing project also
    for control. I have ordered 5 to play with. Also thinking about making my
    own boards to use with Stamp II-SX OEM Chips.

    Gary
    Original Message
    From: <DANCHAND@a...>
    To: <basicstamps@egroups.com>
    Sent: Sunday, July 30, 2000 4:18 PM
    Subject: Re: [noparse][[/noparse]basicstamps] Basic Stamp II OEM Kit


    >
    > I have purchased an installed one of these in an industrial machine.
    >
    > Has worked extremely well in the project.
    >
    > I/O was Opto22 Snap Board
    >
    > Connections were with connectamundos from Scott Edwards.
    >
    > Dan Christadoss
    >
    >
    >
    >
    >
    >
    >
    >
    >
Sign In or Register to comment.