PLC''s....
Chris,
Thank you for the PLC information and Allen-Bradley web site - very
informative. I'm learning alot.
Tim
Original Message
From: Chris Shuster <cpuman3@h...>
To: basicstamps@egroups.com <basicstamps@egroups.com>
Date: Sunday, June 18, 2000 3:38 PM
Subject: Re: [noparse][[/noparse]basicstamps] PLC's....
>Hi yah,
>A manual is a good place to start. It's not to hard to learn about PLCs
>I did it when I was 13. I am 15 now and been playing with PLCs and stamps
>for a wile now. Go to http://www.ab.com/ I can't remember exactly but there
>should be a page where you can print up some muanals. Ladder Logic is a
>fairly simple lang. to master, but you will need to get their software
which
>will cost yah (-sigh- what doesn't?). I can help you some if you like but
my
>knollege is all self taught and I only know the basics (well a bit more
than
>that). Also on the subject line of your msgs that aren't on topic put [noparse][[/noparse]OT]
>as you don't want to upset the memebers of this list, I have seen it happen
>it's not a pretty sight
. Also I never said I could spell to well
but
I
>do know a lot about comps. and elec. Any way read a maunal and browse the
AB
>sight for some info. I know some one who programs em as a job I can pass
any
>questions on to him if you like. Just thought I would throw my 2 cents in
![=) =)](https://forums.parallax.com/resources/emoji/smiley.png)
>Have a good day!
>
>Chris Shuster
>http://www.uhpage.com/cpuman
>http://www.geocities.com/cpuman3
>
>>From: "Tim and Jo" <dema@t...>
>>Reply-To: basicstamps@egroups.com
>>To: "Basic Stamp List" <basicstamps@egroups.com>
>>Subject: [noparse][[/noparse]basicstamps] PLC's....
>>Date: Sun, 18 Jun 2000 14:00:47 -0700
>>
>>Hello Everyone,
>>
>> Can anyone point me in the right direction to educate myself about
>>PLC's? Am I correct that PLC stands for Programmable Logic Controller and
>>is the primary use in industrial controls?
>>
>>Thanks,
>>
>>Tim
>>
>>
>>
>>
>>
>________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>
>
>
>
Thank you for the PLC information and Allen-Bradley web site - very
informative. I'm learning alot.
Tim
Original Message
From: Chris Shuster <cpuman3@h...>
To: basicstamps@egroups.com <basicstamps@egroups.com>
Date: Sunday, June 18, 2000 3:38 PM
Subject: Re: [noparse][[/noparse]basicstamps] PLC's....
>Hi yah,
>A manual is a good place to start. It's not to hard to learn about PLCs
>I did it when I was 13. I am 15 now and been playing with PLCs and stamps
>for a wile now. Go to http://www.ab.com/ I can't remember exactly but there
>should be a page where you can print up some muanals. Ladder Logic is a
>fairly simple lang. to master, but you will need to get their software
which
>will cost yah (-sigh- what doesn't?). I can help you some if you like but
my
>knollege is all self taught and I only know the basics (well a bit more
than
>that). Also on the subject line of your msgs that aren't on topic put [noparse][[/noparse]OT]
>as you don't want to upset the memebers of this list, I have seen it happen
>it's not a pretty sight
![=) =)](https://forums.parallax.com/resources/emoji/smiley.png)
![=) =)](https://forums.parallax.com/resources/emoji/smiley.png)
I
>do know a lot about comps. and elec. Any way read a maunal and browse the
AB
>sight for some info. I know some one who programs em as a job I can pass
any
>questions on to him if you like. Just thought I would throw my 2 cents in
![=) =)](https://forums.parallax.com/resources/emoji/smiley.png)
>Have a good day!
>
>Chris Shuster
>http://www.uhpage.com/cpuman
>http://www.geocities.com/cpuman3
>
>>From: "Tim and Jo" <dema@t...>
>>Reply-To: basicstamps@egroups.com
>>To: "Basic Stamp List" <basicstamps@egroups.com>
>>Subject: [noparse][[/noparse]basicstamps] PLC's....
>>Date: Sun, 18 Jun 2000 14:00:47 -0700
>>
>>Hello Everyone,
>>
>> Can anyone point me in the right direction to educate myself about
>>PLC's? Am I correct that PLC stands for Programmable Logic Controller and
>>is the primary use in industrial controls?
>>
>>Thanks,
>>
>>Tim
>>
>>
>>
>>
>>
>________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>
>
>
>