PLC''s....
Archiver
Posts: 46,084
Hi yah,
A manual is a good place to start. It's not to hard to learn about PLCs
I did it when I was 13. I am 15 now and been playing with PLCs and stamps
for a wile now. Go to http://www.ab.com/ I can't remember exactly but there
should be a page where you can print up some muanals. Ladder Logic is a
fairly simple lang. to master, but you will need to get their software which
will cost yah (-sigh- what doesn't?). I can help you some if you like but my
knollege is all self taught and I only know the basics (well a bit more than
that). Also on the subject line of your msgs that aren't on topic put [noparse][[/noparse]OT]
as you don't want to upset the memebers of this list, I have seen it happen
it's not a pretty sight
. Also I never said I could spell to well but I
do know a lot about comps. and elec. Any way read a maunal and browse the AB
sight for some info. I know some one who programs em as a job I can pass any
questions on to him if you like. Just thought I would throw my 2 cents in
Have a good day!
Chris Shuster
http://www.uhpage.com/cpuman
http://www.geocities.com/cpuman3
>From: "Tim and Jo" <dema@t...>
>Reply-To: basicstamps@egroups.com
>To: "Basic Stamp List" <basicstamps@egroups.com>
>Subject: [noparse][[/noparse]basicstamps] PLC's....
>Date: Sun, 18 Jun 2000 14:00:47 -0700
>
>Hello Everyone,
>
> Can anyone point me in the right direction to educate myself about
>PLC's? Am I correct that PLC stands for Programmable Logic Controller and
>is the primary use in industrial controls?
>
>Thanks,
>
>Tim
>
>
>
>
>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
A manual is a good place to start. It's not to hard to learn about PLCs
I did it when I was 13. I am 15 now and been playing with PLCs and stamps
for a wile now. Go to http://www.ab.com/ I can't remember exactly but there
should be a page where you can print up some muanals. Ladder Logic is a
fairly simple lang. to master, but you will need to get their software which
will cost yah (-sigh- what doesn't?). I can help you some if you like but my
knollege is all self taught and I only know the basics (well a bit more than
that). Also on the subject line of your msgs that aren't on topic put [noparse][[/noparse]OT]
as you don't want to upset the memebers of this list, I have seen it happen
it's not a pretty sight
. Also I never said I could spell to well but Ido know a lot about comps. and elec. Any way read a maunal and browse the AB
sight for some info. I know some one who programs em as a job I can pass any
questions on to him if you like. Just thought I would throw my 2 cents in
Have a good day!
Chris Shuster
http://www.uhpage.com/cpuman
http://www.geocities.com/cpuman3
>From: "Tim and Jo" <dema@t...>
>Reply-To: basicstamps@egroups.com
>To: "Basic Stamp List" <basicstamps@egroups.com>
>Subject: [noparse][[/noparse]basicstamps] PLC's....
>Date: Sun, 18 Jun 2000 14:00:47 -0700
>
>Hello Everyone,
>
> Can anyone point me in the right direction to educate myself about
>PLC's? Am I correct that PLC stands for Programmable Logic Controller and
>is the primary use in industrial controls?
>
>Thanks,
>
>Tim
>
>
>
>
>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com