Earlybirds were supposed to be in August. Mine was September shipment. The earthquakes may have something to do with late shipments.
Looks like it did not go into manufacturing until Sept 20.
Juan Daniel Garcia Lizarraga Creator on September 20
Hi Keith
we are now in our manufacturing process of Parral dev board, we are working in extras to have complements when Parral get to our Backers. We have been busy with our extras but we are going to update everything we do.
Thanks
Earlybirds were supposed to be in August. Mine was September shipment. The earthquakes may have something to do with late shipments.
Looks like it did not go into manufacturing until Sept 20.
Juan Daniel Garcia Lizarraga Creator on September 20
Hi Keith
we are now in our manufacturing process of Parral dev board, we are working in extras to have complements when Parral get to our Backers. We have been busy with our extras but we are going to update everything we do.
Thanks
I'm not in a big rush. In fact, I have no idea what I'm going to do with this board. I have way too many Propeller boards as it is. I just did it to support him.
Perhaps Juan could even design a smaller version using the QFP part. Included PSU is good. Mine is able to supply 3.3V from the USB, but the amps aren't great. However, it does accept external 3.3V without configuration (the regulator can have 3.3V at its output with or without a supply voltage at its input).
Earlybirds were supposed to be in August. Mine was September shipment. The earthquakes may have something to do with late shipments.
Looks like it did not go into manufacturing until Sept 20.
Juan Daniel Garcia Lizarraga Creator on September 20
Hi Keith
we are now in our manufacturing process of Parral dev board, we are working in extras to have complements when Parral get to our Backers. We have been busy with our extras but we are going to update everything we do.
Thanks
I'm not in a big rush. In fact, I have no idea what I'm going to do with this board. I have way too many Propeller boards as it is. I just did it to support him.
According the their Facebook page looks like they got their Propeller chips yesterday, and are awaiting the boards. Question is, are the boards bare or populated?
We have taken time to start delivering to our backers because we have had a lot problems with our suppliers, but now we only are waiting for the boards, we are ready to start delivering in about 20 days,
for your patience, we are gong to send you extras with the board and as soon as you get the boards we are going to deliver a 3D printable robot movil to be easier learn to use Parral dev board
thank you very much for your understanding, we are working everyday to be faster the boards delivery
Hi there,
I missed the Kickstarter project. And there seems to be difficulties with delivery. Should these be solved I'd be interested in buying some of these boards.
Any news with this?
Best regards,
proplem
Does anyone have any Parallax-sold breadboards they can confirm it fits into? I have an old aluminum-mounted Radioshack one that has identical dims and looks like it's laid out the same as: 700-00078 and the spacing of power rails is a bit too wide. The one in the FLiP try-it kit looks to be laid out differently.
Does anyone have any Parallax-sold breadboards they can confirm it fits into? I have an old aluminum-mounted Radioshack one that has identical dims and looks like it's laid out the same as: 700-00078 and the spacing of power rails is a bit too wide. The one in the FLiP try-it kit looks to be laid out differently.
Cheers
Have not received mine yet. Will measure when I get it. Should fit most recent generic breadboards.
I just got two packages but I only ordered one. I'm a bit concerned that the address label on the second one had someone else's name on it as well as mine. Maybe the label got cut wrong. The other name was "Christos Stavrou". Is that anyone here?
Hi there,
I missed the Kickstarter project. And there seems to be difficulties with delivery. Should these be solved I'd be interested in buying some of these boards.
Any news with this?
Best regards,
proplem
Comments
https://www.kickstarter.com/projects/1424716448/parral-dev-board/description
Looks like it did not go into manufacturing until Sept 20.
http://www.bloguetronica.com/2016/09/placa-de-desenvolvimento-prop-ii.html
The latest version:
http://www.bloguetronica.com/2016/12/placa-de-desenvolvimento-prop-ii-rev-a.html
Perhaps Juan could even design a smaller version using the QFP part. Included PSU is good. Mine is able to supply 3.3V from the USB, but the amps aren't great. However, it does accept external 3.3V without configuration (the regulator can have 3.3V at its output with or without a supply voltage at its input).
Kind regards, Samuel Lourenço
According the their Facebook page looks like they got their Propeller chips yesterday, and are awaiting the boards. Question is, are the boards bare or populated?
Not sure what the movil (mobile ?) is.
Gosh, if it's a STL, I hope he throws in the 3D printer.
I missed the Kickstarter project. And there seems to be difficulties with delivery. Should these be solved I'd be interested in buying some of these boards.
Any news with this?
Best regards,
proplem
Does anyone have any Parallax-sold breadboards they can confirm it fits into? I have an old aluminum-mounted Radioshack one that has identical dims and looks like it's laid out the same as:
700-00078 and the spacing of power rails is a bit too wide. The one in the FLiP try-it kit looks to be laid out differently.
Cheers
Have not received mine yet. Will measure when I get it. Should fit most recent generic breadboards.
They are on Tindie now:
https://www.tindie.com/products/coderbad/parral-development-board-for-beginners/
Agreed. I got my flip so I could take it straight from the breadboard and plug it right into a socket on any given prototype device.