OLED SSD1305
Juan Carlos
Posts: 11
in Propeller 1
Forgive my bad English.
I'm trying to run oled 128x32
https://learn.adafruit.com/2-3-monochrome-128x32-oled-display-module
It has the controller SSD1305 and SPI Mode
I'm testing in order:
SSD1306 OLED Driver
http://obex.parallax.com/object/725
SSD1306 Thomas P.
I have modified to try to work with SSD1305 ...
Added to the routine, algorithms asembler (circle point ..)
I do not get out of this point.
but something strange is happening there as a displacement of a bloke every 8 linias
I'm trying to run oled 128x32
https://learn.adafruit.com/2-3-monochrome-128x32-oled-display-module
It has the controller SSD1305 and SPI Mode
I'm testing in order:
SSD1306 OLED Driver
http://obex.parallax.com/object/725
SSD1306 Thomas P.
I have modified to try to work with SSD1305 ...
Added to the routine, algorithms asembler (circle point ..)
I do not get out of this point.
but something strange is happening there as a displacement of a bloke every 8 linias
spin
152K
1024 x 680 - 138K
Comments
a greeting
After much headache and many changes and works.
SSD1306 and SSD1305 not appear to be as equal in 128x32. 128x64 everything worked well in, but with 128x32 no.
Many things are changed and added functions in asembler that improves performance.
Remember it is to 128x32 with SSD1305
I leave my version if you can help another user SSD1305.
The work is not finished, but it works and is faster
a greeting