BS2 Program to Read 1-wire address

Discovery

Somewhere along the line I lost a simple BS2 program that returned the address of Dallas Semiconductor chips when just one chip is on the 1-wire.

Can someone supply me with a BS2 program or point me in the right direction?

Sincerely,

Discovery

Mike Green

I don't believe the BS2 is capable of doing any 1-wire protocol stuff, only the BS2p models are capable of doing 1-wire.

Discovery

Sorry...BS2p is correct.

Discovery

Mike Green

Here's one sample 1-wire program: http://www.parallax.com/go/PBASICHelp/Content/LanguageTopics/ExampleTopics/OwinOwoutEx.htm
Here's another example from the Nuts & Volts Columns: http://www.rambal.com/descargas/libros/Nuts%20and%20Volts/3/Weather%20on%20the%20Wire.pdf
Go through the other Nuts & Volts Columns on Parallax's website. I think there are other examples of 1-wire there.

Discovery

The program I used to read the one-wire addresses was lost on a hard drive that failed due to a broken metal support in the hard drive. However, I was fortunate to stumble onto a hard copy of the code...purely by luck. The one-wire chip addresses were read and the new system is operating perfectly.

This problem is solved.

Sincerely,

Discovery