Shop OBEX P1 Docs P2 Docs Learn Events
(10) PropBOE I/O Shields for free! — Parallax Forums

(10) PropBOE I/O Shields for free!

Ken GraceyKen Gracey Posts: 7,392
edited 2013-10-25 22:06 in Propeller 1
Hey there,

If somebody is willing to collect up ten (10) USA addresses I would happily send you one of my PropBOE I/O Shields from PropellerPowered.com.

So, I'm looking for somebody to take this task on and just return to me with a consolidated list of addresses, either in a spreadsheet or single document so I can hand it off to somebody else to handle USPS shipping. Of course you will keep one for yourself, too.

Looking for an organizer.

Thanks,

Ken Gracey

photo.jpg
photo.jpg
1024 x 765 - 125K

Comments

  • Duane DegnDuane Degn Posts: 10,588
    edited 2013-10-22 15:07
    These PropBOE I/O Shields have already been given away.
    Sorry, there are not any left in this giveaway.
    They were all given away within four hours of Ken's original post.

    (Original Post Below)
    I'd be happy to do this Ken.

    I like making lists (see my signature).

    I'm also happy to let someone else do it.
  • Ken GraceyKen Gracey Posts: 7,392
    edited 2013-10-22 15:12
    Thank you, Duane! Let me know when you've got the horses in the corral.
  • Duane DegnDuane Degn Posts: 10,588
    edited 2013-10-22 15:20
    The giveaway is over.

    (Original Post Below)
    So does anyone who want one PM me their address?

    I'll assume so until told otherwise.

    Does Parallax also want a phone number?

    Should Shield seekers already have a PropBOE before requesting an I/O Shield?

    Is it first come first served?

    Hey all, you head Ken. PM me your address if you want one of these. (Is that how it works?)

    I'll update this thread every so often with the latest count of remaining board. So far, nine remaining.
  • Ken GraceyKen Gracey Posts: 7,392
    edited 2013-10-22 15:23
    Yeah, you're on your way Duane. I don't need any phone numbers.
  • ercoerco Posts: 20,256
    edited 2013-10-22 15:28
    Hi hi hi, DWayyyne! I'm your huckleberry!
  • Duane DegnDuane Degn Posts: 10,588
    edited 2013-10-22 16:08
    erco wrote: »
    Hi hi hi, DWayyyne! I'm your huckleberry!

    Yes, my huckleberry friend. Do you want one?

    Assuming erco does want one, there are still five available. Edit: They are all gone.

    The forum software requires 60 seconds between outgoing private messages. I'll acknowledge the requests as soon as the software will let me.
  • zappmanzappman Posts: 418
    edited 2013-10-22 17:11
    Hi Duane, I would like a PropBOE I/O Shield, sending a PM. Thanks, zappman
  • danielstrittdanielstritt Posts: 43
    edited 2013-10-22 17:26
    I sent PM as well. Would love this addition to my small but growing collection of prop based stuff.

    Daniel
  • Duane DegnDuane Degn Posts: 10,588
    edited 2013-10-22 18:34
    I'm replying to the latest batch of private messages.

    Only 2 left! They are gone.
  • RobotWorkshopRobotWorkshop Posts: 2,307
    edited 2013-10-22 18:40
    I could use one.

    Robert
  • Duane DegnDuane Degn Posts: 10,588
    edited 2013-10-22 18:46
    That's it. The shields are all gone.

    Robert and Rich got the last two.
  • Duane DegnDuane Degn Posts: 10,588
    edited 2013-10-22 19:17
    So who do we owe our thanks to?

    Are these gifts from Parallax alone or if Jeff Ledger one of our benefactors?
  • Ken GraceyKen Gracey Posts: 7,392
    edited 2013-10-22 20:52
    Duane Degn wrote: »
    So who do we owe our thanks to?

    Are these gifts from Parallax alone or if Jeff Ledger one of our benefactors?

    You can thank Jeff for making the product. I bought them with other plans but couldn't make the time to do what I originally envisioned. There's no need to thank me because I already know all of you appreciate it.
  • Duane DegnDuane Degn Posts: 10,588
    edited 2013-10-22 21:29
    Ken Gracey wrote: »
    There's no need to thank me because I already know all of you appreciate it.

    I'd rather they thank you than thank me (in PMs). I just cut and pasted a few names and addresses (I've sent you an email with the list).

    Know my appreciation.

    No, that doesn't work.

    Thanks Ken.
  • Ken GraceyKen Gracey Posts: 7,392
    edited 2013-10-23 06:58
    You are all very welcome.

    The next effort is to clean up my home shop - it's full of Parallax goodies from past and present: development boards, robots, sensors, etc. Maybe I'll produce a list of it and promote a forum member again to find a home for these parts.
  • John AbshierJohn Abshier Posts: 1,116
    edited 2013-10-23 07:01
    Thanks, Ken.

    John Abshier
  • bee_manbee_man Posts: 109
    edited 2013-10-23 15:37
    Thanks Ken, Jeff, and Duane. I already have a new plywood robot in mind for this.

    Jim
  • Buck RogersBuck Rogers Posts: 2,185
    edited 2013-10-25 22:06
    Ken Gracey wrote: »
    You are all very welcome.

    The next effort is to clean up my home shop - it's full of Parallax goodies from past and present: development boards, robots, sensors, etc. Maybe I'll produce a list of it and promote a forum member again to find a home for these parts.

    Hello!
    Actually Ken, I do not know if you meant it or not, but I'll be glad to accept the entire contents. Please PM me, when you have a chance with a list. I believe I can convince or confuse several people besides myself to fabricate an interest in the wonderful stuff that Parallax makes and did make.

    Oh and Erco please enjoy your board.
Sign In or Register to comment.