Shop OBEX P1 Docs P2 Docs Learn Events
Boe-Bot WIth BOE and Homework Board — Parallax Forums

Boe-Bot WIth BOE and Homework Board

lukkasdollarlukkasdollar Posts: 2
edited 2012-12-14 06:19 in BASIC Stamp
Ok to start off..... Hello, and if this question has already been ask please point to that thread
1. Have went through the Boe-Bot book and did all the different programs and working some on my own
2. The question.... Is there a way to have both BOE and homework board on the Boe-Bot and have them communicate together


EX. IR sensors on BOE and Whiskers on homework board (bad example i know but just and example)
EX 2 maybe Ping on BOE and IR on HOmework board


Thanks for replies

Comments

  • Mike GreenMike Green Posts: 23,101
    edited 2012-12-13 21:23
    Yes, it's possible. Physically, you need to mount the Homework Board on standoffs over the BOE with enough spacing so you can access all you need to. You'll need a power connection for the Homework Board and the ground have to be connected together.

    There's a pair of Nuts and Volts Columns on networking together two or more Stamps. You'll want to start with that as an example of what you might do.
  • lukkasdollarlukkasdollar Posts: 2
    edited 2012-12-14 05:56
    Thank you for the reply Which Volume on the Nuts & Volts Columns are you refering to

    Thanks
  • Mike GreenMike Green Posts: 23,101
    edited 2012-12-14 06:19
    #55 & #56. You learn more if you look it up yourself ... you notice other column titles that look interesting ... maybe next time you need something, you'll remember that you saw something there.
Sign In or Register to comment.