Shop OBEX P1 Docs P2 Docs Learn Events
Emic 2 speaks! — Parallax Forums

Emic 2 speaks!

ratronicratronic Posts: 1,451
edited 2012-07-20 05:42 in Robotics
Just received my Emic 2 today and I recorded it saying "forward" on my computer which sounds amazing in 5.1 surround even though it is mono. It also sounds very good plugged into the Veho 360 speaker. But the forum won't let me upload a .wav file or I would let you hear at least the default voice.

Edit: it is in the zip file. Now correct file
zip
zip
Rectest.zip
177K

Comments

  • jdoleckijdolecki Posts: 726
    edited 2012-07-05 17:50
    I going to order one it sound really good.

    Did you see the examples by Joe Grand on Youtube?
  • ratronicratronic Posts: 1,451
    edited 2012-07-05 17:55
    I didn't see the YouTube but I did run his demo program which at the end sings "Daisy".
  • Phil Pilgrim (PhiPi)Phil Pilgrim (PhiPi) Posts: 23,514
    edited 2012-07-05 18:41
    You can always zip the .wav file and upload it that way.
  • ratronicratronic Posts: 1,451
    edited 2012-07-05 18:46
    I added it to the top thread, I think the recording volume was a little low.
  • TymkrsTymkrs Posts: 539
    edited 2012-07-05 19:22
    We have some samples/demos of stuff we've done with it:

    and the first spin podcast: http://www.firstspin.tv/2012/07/03/first-spin-episode-033-emic-2-text-to-speech-module/
  • ratronicratronic Posts: 1,451
    edited 2012-07-05 19:38
    Very nice demo Tymkrs!
  • ercoerco Posts: 20,256
    edited 2012-07-06 08:02
    Emic 2 is totally amazing, hats off to Joe Grand. Too bad it is likely to be the nail in the coffin of a full-blown propeller tts effort.
  • ratronicratronic Posts: 1,451
    edited 2012-07-06 09:16
    erco the Emic 2 work's with the BasicStamp although you would have to get creative how to store what you wanted it to say if you had alot to say!
  • ercoerco Posts: 20,256
    edited 2012-07-06 11:25
    ratronic wrote: »
    ... if you had alot to say!

    I guess at 6700 posts, I am officially verbose! :)
  • ratronicratronic Posts: 1,451
    edited 2012-07-06 19:16
    My Propeller just said this to me!
    zip
    zip
    Rectest-05.zip
    291K
  • Phil Pilgrim (PhiPi)Phil Pilgrim (PhiPi) Posts: 23,514
    edited 2012-07-06 19:26
    erco wrote:
    Too bad it is likely to be the nail in the coffin of a full-blown propeller tts effort.
    I wouldn't count that out just yet. :)

    -Phil
  • ercoerco Posts: 20,256
    edited 2012-07-06 19:47
    Phil Pilgrim (PhiPi) wrote: »
    I wouldn't count that out just yet. :)

    -Phil

    No, we'll NEVER see that. EVER.






    When? And don't say Prop 2. :)
  • Phil Pilgrim (PhiPi)Phil Pilgrim (PhiPi) Posts: 23,514
    edited 2012-07-06 19:53
    erco wrote:
    No, we'll NEVER see that. EVER.
    Hey, you young whippersnapper, I've been around long enough to know when I'm being goaded! :)
    When? And don't say Prop 2.
    PropCAM, then?

    -Phil
  • ercoerco Posts: 20,256
    edited 2012-07-06 20:13
    Phil Pilgrim (PhiPi) wrote: »
    Hey, you young whippersnapper...

    -Phil

    God bless you, PhiPi!
  • Gary9824Gary9824 Posts: 3
    edited 2012-07-16 09:49
    Hi,

    I am new to Robotics but not programming. I have the Emic-2 TTS module and Veho speaker as well as the STAMP serial board. I don't see how to connect the TTS module to the Stamp module for the Serial input to TTS.

    I see how to do power and speakers though.

    The TTS PDF file shows what needs to be connected but not the Serial input from STAMP module to TTS board.

    Any help appreciated.

    Thanks,

    Gary
  • PublisonPublison Posts: 12,366
    edited 2012-07-16 10:09
    Gary9824 wrote: »
    Hi,

    I am new to Robotics but not programming. I have the Emic-2 TTS module and Veho speaker as well as the STAMP serial board. I don't see how to connect the TTS module to the Stamp module for the Serial input to TTS.

    I see how to do power and speakers though.

    The TTS PDF file shows what needs to be connected but not the Serial input from STAMP module to TTS board.

    Any help appreciated.

    Thanks,

    Gary

    In the Basic Stamp example on the product page, It shows the EMIC TX and RX connected to the BS2 PIN0 and PIN1, (look at the I/O definitions in the program.
  • Gary9824Gary9824 Posts: 3
    edited 2012-07-16 12:44
    Thanks for quick reply
    The code says;

    EMIC_TX PIN 0 ' Serial output (connects to Emic 2 SIN)EMIC_RX PIN 1 ' Serial input (connects to Emic 2 SOUT)

    Where is EMIC_RX and EMIC_RX connectors on STAMP module ?

    See attachment snapshot. I don't see where to connect jumpers.

    Thanks,

    Gary
    Serial.png
    Serial.png
    467 x 712 - 279K
  • ratronicratronic Posts: 1,451
    edited 2012-07-16 12:58
    Pin 0 is labeled P0 on the module.
  • Gary9824Gary9824 Posts: 3
    edited 2012-07-16 15:52
    GOT IT !!

    The P0 and P1 serial connections are on the X1 APPMod Header.

    Thanks,

    Gary
  • rogersydrogersyd Posts: 223
    edited 2012-07-20 05:42
    This little guy is awesome. I started a driver in SPIN, not up to to OBJECT standards, but it's a start. At the moment the display commands are not implemented, nor are the dectalk commands... but the basic functionality is represented.
    emic_rogersyd.zip
    zip
    zip
    emic_rogersyd.zip
    14K
Sign In or Register to comment.