Shop OBEX P1 Docs P2 Docs Learn Events
flashfly-xbee-bs2 and pc communication — Parallax Forums

flashfly-xbee-bs2 and pc communication

SfrobotSfrobot Posts: 12
edited 2012-01-30 16:38 in Accessories
If i get FlashFly Wireless Programming Kit then i only need 2 xBee to make it work and reprogram my bs2, If i also want it communicate with pc sent and receive informations while is running does the above set cover me? I dont need another xbee connected to the platform for that purpose right?

Thx Sfrobot

Comments

  • Blue WolfBlue Wolf Posts: 7
    edited 2011-11-17 09:48
    That is correct. You can download your BASIC Stamp programs to your Stamp with the FlashFly Kit and 2 XBee modules. You can also transmit data back and forth between your PC and your remote device using the same hardware. So you will not need to change anything. Please see the FlashFly kit 28183 on Parallax's site, and here for the XBee Series 1 Modules. If you need longer range, then you can always use the Series 1 Pro Modules as well.
  • snit3snit3 Posts: 12
    edited 2012-01-11 17:58
    And make sure you read the FAQ page at Blue Wolf regarding XBees!! http://www.bluewolfinc.com/flashfly-faqs/
  • mike_mmike_m Posts: 4
    edited 2012-01-22 10:09
    Will the the flashfly program a BS-1 module ?


    Mike
  • Nick ErnstNick Ernst Posts: 138
    edited 2012-01-30 16:38
    Mike,
    The system is currently set up to wirelessly program BS2's.
Sign In or Register to comment.