Shop OBEX P1 Docs P2 Docs Learn Events
New Tutorial: Propeller Hardware / Software Setup — Parallax Forums

New Tutorial: Propeller Hardware / Software Setup

Nick McClickNick McClick Posts: 1,003
edited 2010-12-27 15:02 in Propeller 1
Just put up a new tutorial on hardware / software setup for the Prop here.

tutsetup_4.jpg

It covers the basic software setup and hardware for experimenting and learning how to program the propeller - it's meant as a 'lesson 0' for the tutorial series.

Let me know if you spot any errors, have any questions, etc. This tutorial was contributed by OBC.

Comments

  • MagIO2MagIO2 Posts: 2,243
    edited 2010-12-27 14:04
    Check the sentence below Demo Board:
    "The Parallax Propeller Demoboard is a provides a number ..."

    Powering section:
    Maybe you could also add the symbol for "center positive"

    I'd also mention the PST as it is for free and can be used for old-style debugging without a real debugger utilizing the anyways existing serial connection to the PC.
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,091
    edited 2010-12-27 15:00
    /me starts making notes for edit... Thanks!

    We've also covered the PST program pretty extensively in lesson 3.

    OBC
  • Nick McClickNick McClick Posts: 1,003
    edited 2010-12-27 15:02
    Good catch, sentence fixed. For the PST, that's actually in another tutorial. Same deal with the Polarity markings.
Sign In or Register to comment.