PropTool Locking up on Close - Memory Errors
CannibalRobotics
Posts: 535
Hi all,
I'm seeing my PropTool ver 1.2.7 (R2) lock up on close. I get an access violation, details below. This is happening on two different computer's both running XP and seems to happen most closely to sessions using the serial terminal. The 'notify parallax' option is also giving me an error - can't connect to the internet. But while I'm typing this post, that dialog is open.
Any ideas or expirence here?
Thanks,
Jim-
EurekaLog 6.0.18
Application:
1.1 Start Date : Tue, 7 Dec 2010 12:00:37 -0600
1.2 Name/Description: Propeller.exe - (Propeller Tool)
1.3 Version Number : 1.2.7.2
1.4 Parameters :
1.5 Compilation Date: Fri, 15 Jan 2010 09:05:45 -0600
1.6 Up Time : 20 hours, 29 minutes, 27 seconds
Exception:
2.1 Date : Wed, 8 Dec 2010 08:30:05 -0600
2.2 Address : 00599572
2.3 Module Name : Propeller.exe - (Propeller Tool)
2.4 Module Version: 1.2.7.2
2.5 Type : EAccessViolation
2.6 Message : Access violation at address 00599572 in module 'Propeller.exe'. Read of address 00047FE9.
2.7 ID : 4297
2.8 Count : 1
2.9 Status : New
2.10 Note :
Active Controls:
4.1 Form Class : TMainForm
4.2 Form Text : Propeller Tool - SDC_Main_r2
4.3 Control Class: TPTreeView
4.4 Control Text :
Computer:
5.2 Total Memory : 1983 Mb
5.3 Free Memory : 1338 Mb
5.4 Total Disk : 111.78 Gb
5.5 Free Disk : 31.64 Gb
5.6 System Up Time: 18 days, 19 hours, 17 minutes, 31 seconds
5.7 Processor : AMD Turion(tm) 64 X2
5.8 Display Mode : 1280 x 800, 32 bit
5.9 Display DPI : 96
5.10 Video Card : NVIDIA GeForce Go 6150 (driver 8.4.8.7 - RAM 256 MB)
5.11 Printer : HP LaserJet 1022 (driver 6,0,3508,0)
Operating System:
6.1 Type : Microsoft Windows XP
6.2 Build # : 2600
6.3 Update : Service Pack 3
6.4 Language: English
6.5 Charset : 0
I'm seeing my PropTool ver 1.2.7 (R2) lock up on close. I get an access violation, details below. This is happening on two different computer's both running XP and seems to happen most closely to sessions using the serial terminal. The 'notify parallax' option is also giving me an error - can't connect to the internet. But while I'm typing this post, that dialog is open.
Any ideas or expirence here?
Thanks,
Jim-
EurekaLog 6.0.18
Application:
1.1 Start Date : Tue, 7 Dec 2010 12:00:37 -0600
1.2 Name/Description: Propeller.exe - (Propeller Tool)
1.3 Version Number : 1.2.7.2
1.4 Parameters :
1.5 Compilation Date: Fri, 15 Jan 2010 09:05:45 -0600
1.6 Up Time : 20 hours, 29 minutes, 27 seconds
Exception:
2.1 Date : Wed, 8 Dec 2010 08:30:05 -0600
2.2 Address : 00599572
2.3 Module Name : Propeller.exe - (Propeller Tool)
2.4 Module Version: 1.2.7.2
2.5 Type : EAccessViolation
2.6 Message : Access violation at address 00599572 in module 'Propeller.exe'. Read of address 00047FE9.
2.7 ID : 4297
2.8 Count : 1
2.9 Status : New
2.10 Note :
Active Controls:
4.1 Form Class : TMainForm
4.2 Form Text : Propeller Tool - SDC_Main_r2
4.3 Control Class: TPTreeView
4.4 Control Text :
Computer:
5.2 Total Memory : 1983 Mb
5.3 Free Memory : 1338 Mb
5.4 Total Disk : 111.78 Gb
5.5 Free Disk : 31.64 Gb
5.6 System Up Time: 18 days, 19 hours, 17 minutes, 31 seconds
5.7 Processor : AMD Turion(tm) 64 X2
5.8 Display Mode : 1280 x 800, 32 bit
5.9 Display DPI : 96
5.10 Video Card : NVIDIA GeForce Go 6150 (driver 8.4.8.7 - RAM 256 MB)
5.11 Printer : HP LaserJet 1022 (driver 6,0,3508,0)
Operating System:
6.1 Type : Microsoft Windows XP
6.2 Build # : 2600
6.3 Update : Service Pack 3
6.4 Language: English
6.5 Charset : 0
Comments
http://technet.microsoft.com/en-us/sysinternals/bb896653
Robert