Shop OBEX P1 Docs P2 Docs Learn Events
Manual Reference Schematic in Eagle - — Parallax Forums

Manual Reference Schematic in Eagle -

CassLanCassLan Posts: 586
edited 2010-11-27 12:49 in Propeller 1
I'm trying to make some reference schematics in Eagle, so that I can re-use them.

The first one I'm working on is the one from Page 17 in the Manual which I have used since day one with the prop.

I have attached an image of the manual schematic, eagle schematic, and the resulting auto routed board, not to be used, just to visually verify that I'm doing this properly.

Any feedback appreciated.

Rick
SchematicScreenshot.jpg
983 x 799 - 101K
AutoBoardScreenshot.jpg
735 x 652 - 62K
ManualScreenShot.jpg
1065 x 656 - 101K

Comments

  • SapiehaSapieha Posts: 2,964
    edited 2010-11-27 12:46
    Hi CassLan.

    Don't forgot all Capacitors that are needed on that SCH's

    CassLan wrote: »
    I'm trying to make some reference schematics in Eagle, so that I can re-use them.

    The first one I'm working on is the one from Page 17 in the Manual which I have used since day one with the prop.

    I have attached an image of the manual schematic, eagle schematic, and the resulting auto routed board, not to be used, just to visually verify that I'm doing this properly.

    Any feedback appreciated.

    Rick
  • LeonLeon Posts: 7,620
    edited 2010-11-27 12:49
    A reset button is useful.

    The PCB layout is very poor. Route it manually with wide supply and ground tracks.
Sign In or Register to comment.