Propeller Platform RTC and SD card location

bdickens

On the propeller platform, what pins are the RTC and SD card on ? I thought they were up high but i'm thinking they are down around 15

Thanks

schill

The SD card is on P0-P3. It's not shown in the schematic but you can see it on the layout drawing:

http://www.gadgetgangster.com/scripts/displayasset.php?id=494

Nick McClick

It's on there - just go to the URL on the board, the schematic is linked on the bottom (here).

The SD is:
P0: Do
P1: Clk
P2: Di
P3: Cs

The RTC is connected to the I2C pins, same pins as the eeprom.

schill

Nick:

If you go to www.gadgetgangster.com there's a big picture of the Propeller Platform USB at the top (at least for me) as the Featured Project. Clicking on that links me to a page with the following schematic link:

http://www.gadgetgangster.com/scripts/displayasset.php?id=462

That one doesn't have the SD card. Different versions of the board, I guess.

Nick McClick

You are right - it was on the SD but not USB. Just fixed it - now it's correct for both.